• Enabling counter mode for Neuron inputs via evok

    1
    0 Votes
    1 Posts
    2k Views
    No one has replied
  • Adding MCP23017 on i2c

    i2c mcp2308
    2
    0 Votes
    2 Posts
    2k Views
    T
    @tradlost.se Basically yes, but since I do not know much about your board it is hard to tell.
  • Recommended way to access inputs/ooutputs

    10
    0 Votes
    10 Posts
    7k Views
    T
    @cvdd https://github.com/UniPiTechnology/neuron_tcp_modbus_overlay is only for Neurons and will not work for the UniPi 1. For UniPi 1 there is only Evok as API from us. But if you need Modbus and do not want to use the HTTP REST api, websocket or JSON RPC, then take a look at someone implementing Modbus for UniPi 1
  • systemctl enable evok throws error in install script

    2
    0 Votes
    2 Posts
    3k Views
    T
    @ubee Thanks for the tip! I will take a look at it.
  • debug log file size

    5
    0 Votes
    5 Posts
    3k Views
    U
    @Merv, I have the same problem. It doesn't help to change the log level in the service file. It still continues dumping info about every read attempt which is annoying. I guess the "I" in the log indicates log level is Info. And it remains I whatever level you set.
  • Open port RS485

    8
    0 Votes
    8 Posts
    5k Views
    T
    Try reinstalling the Modbus server as described here: https://github.com/UniPiTechnology/neuron_tcp_modbus_overlay
  • Input State remains the same

    neuron pi l203 evok api input
    2
    0 Votes
    2 Posts
    2k Views
    T
    @HarishKumar The evok itself is not designed to handle the logic of your application. That's why we call it API. It is using Tornado which means the server itself runs in one loop so you need to have all the program behavior ready before it is called mainLoop.start(). So if you run an infinite loop anywhere in evok, you stop everything else (reading, setting, all APIs, ...). So I suggest using that APIs, it is much more easier to implement and you have the same functionality. But if you would REALLY want to do it in evok, you would have to prepare your program in a function, all tasks that would take more time would have to be decorated as coroutines and the call has to be yielded in order not to stop the main loop. The logic behind this is a little bit complicated to describe in one post :)
  • reading relay state via WebSocket

    3
    0 Votes
    3 Posts
    3k Views
    B
    @tomas_hora Awesome! When I have time again for this project, I'll try it!
  • RUN1 & RUN2 blinking in 2-second interval

    8
    0 Votes
    8 Posts
    5k Views
    B
    @tomas_hora BTW, I absolute love Neuron! <3 I'll put it everywhere. Having a simple REST API is a bless. Thank you for all your hard work that goes into UniPi!
  • Node-red : set/reset multiple output

    3
    0 Votes
    3 Posts
    4k Views
    T
    @zeus I will think about it how to make it possible, Thanks for the tip: https://github.com/UniPiTechnology/evok/issues/11
  • Setting Password for Evok Webpage

    4
    0 Votes
    4 Posts
    3k Views
    T
    @fipsi72 You can place evok behind a proxy of course...
  • Neuron with JSONPRC and python

    4
    0 Votes
    4 Posts
    3k Views
    T
    @Juergen Relay 1 does not exists. Check the web interface of evok for correct identification. The correct identification is eg. 2_1
  • 1-Wire: Send bits to DS2408

    5
    0 Votes
    5 Posts
    3k Views
    T
    @Kitaps IC stands for Integrated Circuit. What code?
  • Neuron - Addressing GPIO from C++

    28
    0 Votes
    28 Posts
    21k Views
    T
    @Boy-Lenssen You should be OK.
  • Installation problem

    3
    0 Votes
    3 Posts
    3k Views
    T
    Thanks for the report. I will take a look at it :) https://github.com/UniPiTechnology/evok/issues/10
  • evok on Neuron

    19
    0 Votes
    19 Posts
    12k Views
    T
    @Merv Thanks a lot for the info!
  • Addressing the pins while using Evok

    evok neuron pi l203
    2
    0 Votes
    2 Posts
    2k Views
    T
    @HarishKumar It's ok. That's why the forum is here. If you visit the web interface of evok, you will see the numbers of IO of the Neuron you are using. In general it is numbered as X_Y where X is the number of group (1-3 depending on S/M/L model) and Y is the number of the Di/Ro/... So for example you would address DI1.4 as a string 1_4 with device type di.
  • EVOK Documentation

    1
    0 Votes
    1 Posts
    2k Views
    No one has replied
  • Error using "jsonrpclib"

    6
    0 Votes
    6 Posts
    4k Views
    C
    I have a Raspberry Pi 3 running Jessie with fresh installation of Evok. I am also using Python 3.4. I received the error, "TypeError: 'NoneType' object is not subscriptable." The workaround Tomas referred to on Nov 25, 2016, worked, but I first had to install jsonrpclib-pelix, a version of jsonrpclib updated for Python 3. The standard jsonrpclib does not work with Python 3.
  • UniPi Control Panel does not look for lost value

    2
    0 Votes
    2 Posts
    2k Views
    T
    Thansk a lot. Could you create a pull request or a bug report on github?