Hello Thomas
Exemple with L503, xS51 and xG18. I also have some
DS18B20 on the 1Wire Bus.
Install Steps:
Check if everything is configured and works correct in evok
Check output of <IP_of_Neuron>/rest/all in your Browser
Install FHEM from the repository (
https://fhem.de/#Installation)
Connect FHEM with your Neuron by typing: define <Name> Neuron <IP>:80
set attributes like in the picture (see on the bottom) below
33af1b3e-7f12-4e72-9537-d3295fc93b6e-image.png
After that all inputs and outputs get recogniced automatically.
You will get a room named NeuronPin with all devices.
Example (with some changed names):
b4430f01-8ff0-46ad-bb4c-e75254958745-image.png
Example of a analog input with a PT1000 Sensor for Temp. mesurment:
46c55b40-b0fc-4e6c-bfc9-23234f3aea3d-image.png
Example of a analog input with a Honywell PX3 pressure sensor:
d38edfa9-8b54-40af-a144-2569bbdb9b9b-image.png
I am developing a control system with FHEM for my distillery with a heat recoupling for the building heating of the residential house. When I'm finished, I'll be glad to present the project to you.