• Stuck Relays

    Moved
    13
    0 Votes
    13 Posts
    7k Views
    T
    @kolopes Exactly... But the relays in Neurons are only 5A
  • Info Point Mervis...in Neuron

    10
    0 Votes
    10 Posts
    5k Views
    T
    @TriathletC Check the Help - F1 and search for Modbus server
  • WiFi instead NIC [Mervis]

    8
    0 Votes
    8 Posts
    7k Views
    I
    Do not blow this up to the sky. I already have WiFi 1 meter away from Neuron, so no expenses for that. At us is like that if anything wil be burned, that the overcurrent will come over PHONE LINE, electricity is NOT the problem anymore, we solved that out few years ago, and now is not the issue anymore. If i put the surge protector(belive me i tryed that) it is blown too and i have two expenses, surge protector and router, if i use only wifi i only change router and that's it. But this router is "blown-burned" only if nobody is home, that happends werry rearly, but it happends, if anybody is home all you need to do is unplug the DSL line and NO problems at alll. What about that WiFi connection is not so 100% like wired is ordinarry BS, before Neuron i made automation by myself and it was runing wirelesly for 3 YEARS with any problem at all, it was not burned by lightning, line was woking 24/7 and i NEVER had wireless connection problem at all, so that is why i want to connect Neuron wirelesly, i could use eg. wireless extender if there was a problem and put between extender and Neuron a UTP wire, and let between extender and router be a wireless connection, that would be even better than the RPI3 onboard wireless. But i can go on but i think i explained why i need wifi connecton. PS. All power for mixing walves, pumps and Neuron itself, are connected over 2kW UPS (i know that is an overkill), that anything make and come trough all pover protection for the house, will rather destroy the UPS before all other things that are connected to UPS, at least i hope so.
  • Develop in Java

    2
    0 Votes
    2 Posts
    2k Views
    T
    @Geovanni-Rojas-Mazariegos Sure, get the opensource image which already includes the TCP Modbus interface for all IOs except 1Wire (fot that use eg. owfs). https://files.unipi.technology/s/public
  • Speed of inputs?

    Moved
    3
    0 Votes
    3 Posts
    2k Views
    I
    Thanks. That is more than adequate for this purpose I am going to use it for :)
  • This topic is deleted!

    1
    0 Votes
    1 Posts
    2 Views
    No one has replied
  • Neuron M203 shuts down after connecting to power supply

    Moved
    4
    0 Votes
    4 Posts
    2k Views
    T
    @yannic Even the red PWR leds?
  • Node-RED support?

    Moved node-red neuron
    2
    0 Votes
    2 Posts
    2k Views
    T
    @sjp770 For sure! You still have the full access to the Linuy system and what you need is the latest development branch of evok which is under development and use a websocket connection to evok from node-red :) https://www.unipi.technology/tutorial/using-nodered-and-ibm-bluemix-with-evok-over-websockets-58 https://github.com/UniPiTechnology/evok
  • 0 Votes
    2 Posts
    2k Views
    S
    Solved the problem, I did two things wrong: I had enabled the 1wire-interface through raspi-config, turning this off made the sensor show up in evok I had two bad sensors connected to the hub Evok output: 1Wire Sensors/Devices Sensor DS18B20 - 28FF896672150104: 19.1°C Sensor DS18B20 - 28FF1FDF7215012D: 20.1°C Sensor DS18B20 - 28FF71B761150300: 39.5°C Sensor DS18B20 - 28FF147F611502B8: 37.9°C Sensor DS18B20 - 28FFFEA162150371: 20.6°C Sensor DS18B20 - 28FF55B66215038C: 45.6°C
  • Neurons Analog Input (AI) measurement accuracy problem

    Moved
    2
    0 Votes
    2 Posts
    2k Views
    T
    @wizro_pl That is a common behaviour of most analogue inputs... If you want to have 0 than set a limit eg 0.03V that everything below is 0V
  • minicom for Neuron serial port

    Moved
    3
    0 Votes
    3 Posts
    3k Views
    T
    @CaitC Hello, if you want to get access to the terminal, I suggest using SSH (root:unipi). Serial console is not wired out on Neuron... Or how do you have it connected?
  • M503 Analog I/O

    Moved
    4
    1 Votes
    4 Posts
    3k Views
    T
    @stephamd Just uploaded the new documentation...
  • Interrupt mask on Neuron group - Digital Input state event

    Moved
    10
    0 Votes
    10 Posts
    5k Views
    T
    @sabrus Right now one loop in Mervis is about 30-60ms (can be seen while in debug mode in System status tab) but it also depends on the complexity of the application. You can also try to set a lower sleep ration in the task, eg. 5% in stead of 50% to make it little faster. There are some plans to make the whole runtime run much faster but I cannot promise anything...
  • How to use relay?

    Moved
    4
    0 Votes
    4 Posts
    3k Views
    S
    @Alessandro lbcm2835 is used to access I/O pins on the Pi. UniPis do not use GPIO to handle output. There are internal ARM processors which are connected to the Pi via an SPI bus that handle the system's IO. The easiest way to access the relays would be to install the neuron tcp modbus overlay as stated above and access the relays through a c++ modbus library.
  • Modbus Registers Mapping Broken?

    Moved
    3
    0 Votes
    3 Posts
    3k Views
    H
    Tomas thank you for your fast reply. Using pymodbus.client fixed it. pyModbusTCP.client I used seems to be broken.
  • Dead on arrival?

    Moved neuron support malfunction
    5
    0 Votes
    5 Posts
    4k Views
    T
    @Jan-Teunis Than everything should be working well. The RUN led also indicates if there has been a recent communication with the group (1-3).
  • PWM Output

    Moved
    6
    0 Votes
    6 Posts
    5k Views
    T
    @sabrus Sorry it should be 0.0000125s. From the formula in the documentation. (5+1)/48000000*100 equals 0.0000125. And yes...
  • 0 Votes
    1 Posts
    2k Views
    No one has replied
  • protect to prevent damage to the Neuron?

    Moved
    2
    0 Votes
    2 Posts
    2k Views
    T
    Hello @Boy-Lenssen , list itemDIs are a galvanically isolated so unless the voltage and current will stay in the limits, you should be OK Digital outputs & analog inputs and outputs are coupled together to common ground. So a there could be a risk of potential damage to these components when you are off the limits. But do not worry the device is designed to provide maximum reliability when installed in the standard installation environment. And yes, replacing the device in case something goes wrong is the easiest and cheapest solution.
  • How to connecting the Neuron Pi to LCD monitor

    Moved
    3
    0 Votes
    3 Posts
    3k Views
    Paisan Sae-leeP
    @Tomas_hora Thank you for advice to me.