• Cant detect temperature sensor via 1-wire

    3
    0 Votes
    3 Posts
    2k Views
    J
    Ouu.. thank you.... my fault... Problem was with a connector... I mixed RJ11 connector with RJ45... Anyway.. Thank you :)
  • M503 maximum voltage AInput

    4
    0 Votes
    4 Posts
    2k Views
    T
    Hello @PR-Reger, Generally speaking that is always the safer approach, if possible. Regards, Tomas
  • PWM on Neuron M503

    5
    1
    0 Votes
    5 Posts
    3k Views
    T
    @francoisd You can do it by hand or use .csv to import Modbus device definition - https://kb.mervis.info/doku.php/en:mervis-ide:30-communication-protocols:30-modbus?s[]=modbus&s[]=csv I've created the device definition for you, so you can simply import it by right clicink on the modbus TCP channel and select Import device definition. The .csv file should contain: StationNumber,Name,Element,Count,Function,Writable,StType,ByteOrder,K,Q,X1,Y1,X2,Y2 1,PWM_prescale,1018,1,HoldingRegister,1,Int,12,,,,,, 1,PWM_cycle,1019,1,HoldingRegister,1,Int,12,,,,,,
  • Neuron L403

    5
    0 Votes
    5 Posts
    3k Views
    T
    dear @raedhammad, people should definitely know what they are going to face, but blaming our solution without knowing what went wrong... As stated previously, please continue in the email communication so we have just one point where to talk so we can discuss all your issues there. We can then past the conversation here if other might want to read through.
  • Direct switch problém

    3
    0 Votes
    3 Posts
    2k Views
    T
    @jiriletak Dobrý den, LED světla obecně se chovají kvůli integrovanému zroji tak, že špičkový proud při sepnutí může přesahova ti třicetinásobek proudu při běžném odběru. Rozhodně nedoporučujeme tedy takovétho zátěže připojovat přímo na RO našich jenotek a raději to řešit pomocí spínacích prvků k tomu určených. Naše RO jsou míněna jen jako ovládací, pro další silové spínací prvky.
  • var mountpoint on usb stick

    Moved
    3
    0 Votes
    3 Posts
    2k Views
    L
    Hi Martin Thank you for quick response. Jiri
  • Same RO at same time

    Moved
    2
    0 Votes
    2 Posts
    1k Views
    Martin KudláčekM
    Hi @arolli, yes, you can start all 4 relays at the same time. Martin
  • Raspbian useable?

    4
    0 Votes
    4 Posts
    3k Views
    Martin KudláčekM
    Hello @knebb, the current official way is to use Raspbian Stretch, then add our repository and install evok from it. Use the instructions on https://github.com/UniPiTechnology/evok. Regards, Martin
  • Neuron M503 Analog Inputs 4-20 mA

    6
    0 Votes
    6 Posts
    3k Views
    Martin KudláčekM
    Hi @dalibor , that's odd, it should definitely work. Can you share the project with me on [email protected]? Thanks, Martin
  • Digital Output Voltage ?

    Moved
    2
    0 Votes
    2 Posts
    2k Views
    T
    Hi @stevenbrs, The DOs are NPN type (open collector), check the documentation for proper wiring. Everything is OK with your HW and SW, do not worry.
  • Wifi communication between 2 unipi neuron

    Moved
    4
    0 Votes
    4 Posts
    2k Views
    T
    @ikiiwii Wifi Configuration is not yet implemented in Mervis, so you would have to configure the wifi client in linux using ssh. Then you will setup SSCP communication between those 2 Neurons.
  • Neuron 12V digital input

    Moved
    5
    0 Votes
    5 Posts
    4k Views
    Martijn HemeryckM
    Ok; took me quite some time, but I just did manage to read out the sensor values. Leaving this here as future reference; the involved PIR sensor was the Jablotron JS-20 Largo. A small schematic was provided with the sensor out of the box, but the key find for me was that the sensor outputs also need to be wired up to the 12V power source; see adapted schematic and pictures. Thanks a lot for the schematics, since they really made it possible for me to reverse-engineer the setup.
  • Extcomm port for second RS485 on M503

    2
    0 Votes
    2 Posts
    2k Views
    Martin KudláčekM
    Hi @mohamed-dounnani, the addressing is as follows: /dev/extcomm/0/... <- All serial ports (0 = RS485 1.1, 1 = RS485 2.1) /dev/extcomm/1/... <- Serial ports of Group 1 (0 = RS485 1.1) /dev/extcomm/2/... <- Serial ports of Group 2 (0 = RS485 2.1) You can reveal the structure by listing the directory: unipi@L503-sn101:~ $ ls -l /dev/extcomm/* /dev/extcomm/0: total 0 lrwxrwxrwx 1 root root 12 Aug 31 09:51 0 -> ../../ttyNS0 lrwxrwxrwx 1 root root 12 Aug 31 09:51 1 -> ../../ttyNS1 /dev/extcomm/1: total 0 lrwxrwxrwx 1 root root 12 Aug 31 09:51 0 -> ../../ttyNS0 /dev/extcomm/2: total 0 lrwxrwxrwx 1 root root 12 Aug 31 09:51 0 -> ../../ttyNS1 Martin
  • Read Coil Analogic Output M103

    30
    0 Votes
    30 Posts
    17k Views
    Martin KudláčekM
    @mohamed-dounnani, your calculations are in order. With the tests we did above, I am afraid you received a PLC with wrong calibration data. The calibration is a way how to ensure that when you set a desired voltage through Modbus registers, it will in fact set the correct voltage on the terminal connectors. The calibration process is one of many throughout the assembly of the unit. The calibration is done on our testbenches and it means you have to send the unit back to us. We sincerely do apologize for this. Please send me ([email protected]) your number of order for this PLC and I will get back to you with further information. Thank you very much, Martin
  • This topic is deleted!

    Moved
    1
    0 Votes
    1 Posts
    3 Views
    No one has replied
  • UniPi Neuron - UniPi-Mervis-OS-2018-08-03_v1.7-BETA and ssh

    2
    0 Votes
    2 Posts
    2k Views
    Martin KudláčekM
    Hello @bartekwoznica, since image version 1.7 the SSH is disabled by default as a security measure. You can enable it by creating a file named "ssh" in the "boot" partition of the SD card. This process is identical to the Raspbian's: https://hackernoon.com/raspberry-pi-headless-install-462ccabd75d0 Martin
  • pH and EC sensor

    3
    0 Votes
    3 Posts
    2k Views
    B
    @martin-kudláček Thanks a lot, Martin! :-) I'll give it a chance.
  • This topic is deleted!

    Moved
    1
    0 Votes
    1 Posts
    7 Views
    No one has replied
  • 1-Wire problem, cant figure it out.

    Moved
    2
    0 Votes
    2 Posts
    2k Views
    T
    Hi @Nico! That looks like it's most likely a physical layer issue. I would check the solder joints as well as check for any possible shorts of breaks in the cable due to bending. The 1Wire should be able to go out several times further than 10 meters; perhaps try using a CAT5 cable or similar for added overall shielding.
  • MWD error, MWD timeout no connection

    7
    0 Votes
    7 Posts
    4k Views
    T
    @nash_78 Does not seems to be related to the previous topic. It seems you are using UniPi 1 guide instead of UniPi Neuron - https://store.codesys.com/unipi-neuron-for-codesys-sl.html