• Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Groups
    • Search
    • Register
    • Login

    S103-G use GSM/GPRS module to connect to internet

    Scheduled Pinned Locked Moved Neuron Series
    29 Posts 6 Posters 22.8k Views 2 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • roberts_landoR
      roberts_lando
      last edited by roberts_lando

      @tomas_hora Just made a node-red Dashboard to get Modem Data :)

      0_1507124912843_upload-f44d0f00-3612-47f8-aa08-91819d6ff5fe

      0_1507124782319_upload-8a2171eb-31ce-403a-8b88-428e8162c1b4

      With MNC MCC CellID and LAC it is also possible to get the location of the device by using https://opencellid.org/ APIs

      U 1 Reply Last reply
      Reply Quote 0
      • O
        oho
        last edited by

        Re: S103-G use GSM/GPRS module to connect to internet

        Does anyone know if it's possible to send AT commands from Mervis after turning on the modem first? Thanks.

        T 1 Reply Last reply
        Reply Quote 0
        • T
          tomas_hora administrators @oho
          last edited by

          @oho Support of the GSM functionality will be available in Mervis in the next release.

          1 Reply Last reply
          Reply Quote 0
          • U
            unix @roberts_lando
            last edited by

            @roberts_lando hi iam new in node-red and S103-g my question is can you share your nice looking flow to learn better node-red.
            regards

            1 Reply Last reply
            Reply Quote 0
            • roberts_landoR
              roberts_lando
              last edited by roberts_lando

              @unix I have added it to node-red flows library: https://flows.nodered.org/flow/af6487676bd89e5e8b74b2c9da1e176d

              Enjoy :)

              1 Reply Last reply
              Reply Quote 0
              • U
                unix
                last edited by

                Nice thx for help :smile:
                Regards

                1 Reply Last reply
                Reply Quote 0
                • U
                  unix
                  last edited by

                  Hi
                  i have inport your data but i get one error in debug
                  its "3.11.2017, 10:59:29node: parseModelIDfunction : (error)
                  "TypeError: Cannot read property 'trim' of undefined""

                  and the website looks like :
                  Daschboard
                  connect is green but no info i have only change the serial connect to
                  /dev/ttyAMA0: 115200-8n1

                  or i have problems whit the modem i can send the first sms whitout problems but after this only error when i test it whit cu -l /dev/ttyAMA0

                  hope for hints :smile:

                  Regards

                  roberts_landoR 1 Reply Last reply
                  Reply Quote 0
                  • roberts_landoR
                    roberts_lando @unix
                    last edited by roberts_lando

                    @unix Did you close the connection after using cu? Cause that error means that I call .trim() in an undefined var (modelID) that means no data is received after the command. Each command has a timeout, after that I close the read stream from the serial and I try to parse the response string, if the response string is not well parsed those errors are normal, try to put a debug node to see the output of the serial and check that the cu session is closed.

                    Disconnect: type ~ (alt+126) than wait for [unipi] output than type . and hit <Enter>

                    1 Reply Last reply
                    Reply Quote 0
                    • U
                      unix
                      last edited by

                      Hi
                      yes the cu session a closed in debug i see this

                      3.11.2017, 11:25:11node: 96ac4186.358femsg.payload : string[4]
                      "OK↵"
                      3.11.2017, 11:25:13node: 96ac4186.358femsg.payload : string[11]
                      "AT+COPS? ↵"
                      3.11.2017, 11:25:13node: 96ac4186.358femsg.payload : string[17]
                      "+COPS: 0,0,"A1"↵"
                      3.11.2017, 11:25:13node: 96ac4186.358femsg.payload : string[2]
                      "↵"
                      3.11.2017, 11:25:13node: 96ac4186.358femsg.payload : string[4]
                      "OK↵"
                      3.11.2017, 11:25:14node: parseOperatorfunction : (error)
                      "TypeError: Cannot read property 'trim' of undefined"
                      3.11.2017, 11:25:15node: 96ac4186.358femsg.payload : string[10]
                      "AT+CGMI ↵"
                      3.11.2017, 11:25:15node: 96ac4186.358femsg.payload : string[18]
                      "+CGMI: "Fibocom"↵"
                      3.11.2017, 11:25:15node: 96ac4186.358femsg.payload : string[2]
                      "↵"
                      3.11.2017, 11:25:15node: 96ac4186.358femsg.payload : string[4]
                      "OK↵"
                      3.11.2017, 11:25:17node: 96ac4186.358femsg.payload : string[10]
                      "AT+CGMM ↵"
                      3.11.2017, 11:25:17node: 96ac4186.358femsg.payload : string[38]
                      "+CGMM: "GSM850/900/1800/1900","G510"↵"
                      3.11.2017, 11:25:17node: 96ac4186.358femsg.payload : string[2]
                      "↵"
                      3.11.2017, 11:25:17node: 96ac4186.358femsg.payload : string[4]
                      "OK↵"
                      3.11.2017, 11:25:18node: parseModelIDfunction : (error)
                      "TypeError: Cannot read property 'trim' of undefined"
                      

                      Regards

                      roberts_landoR 1 Reply Last reply
                      Reply Quote 0
                      • roberts_landoR
                        roberts_lando @unix
                        last edited by roberts_lando

                        @unix I haven't the possibility to debug it right now, as your debug shows the commands are correctly received, I think you have to change the serial in-out configuration. Check it and send me a screenshot of both.

                        Also try to put a debug node after join node wired with serial-out

                        U 1 Reply Last reply
                        Reply Quote 0
                        • U
                          unix @roberts_lando
                          last edited by

                          @roberts_lando
                          i have found one error in another flow i have running sms sender i have delete this and the error seems only the trim see screenshots.

                          1 alt text
                          2 alt text
                          3 alt text

                          Regards

                          i have check the modem connect over cu and modem works and i disconnect to the modem.

                          roberts_landoR 1 Reply Last reply
                          Reply Quote 0
                          • roberts_landoR
                            roberts_lando @unix
                            last edited by roberts_lando

                            @unix ok I have found the problem: replace \n with \r\n in both serial-in and serial-out nodes than it should work correctly! This has happen because when you have imported the flow I think you haven't already installed node-red-node-serial and the configuration got lost

                            U 1 Reply Last reply
                            Reply Quote 0
                            • U
                              unix @roberts_lando
                              last edited by

                              @roberts_lando

                              WTF great thx for fast response and help :smile:

                              regards

                              roberts_landoR 1 Reply Last reply
                              Reply Quote 0
                              • roberts_landoR
                                roberts_lando @unix
                                last edited by

                                @unix you welcome! :)

                                1 Reply Last reply
                                Reply Quote 0
                                • Vesa KauppinenV
                                  Vesa Kauppinen @roberts_lando
                                  last edited by

                                  @roberts_lando said in S103-G use GSM/GPRS module to connect to internet:

                                  Hi!

                                  Great tutorial!

                                  I use Raspbian Stretch Lite and I can not get the S103-G to work with these instructions. The command cu -l / dev / ttyAMA0 crashes when I try to AT command. Ifconfig does not give ppp0.

                                  What have I missed?

                                  Vesa

                                  U 1 Reply Last reply
                                  Reply Quote 0
                                  • U
                                    unix @Vesa Kauppinen
                                    last edited by

                                    @Vesa-Kauppinen
                                    Hi
                                    have you disable the BT on Pi3

                                    /boot/config.txt addline

                                    dtoverlay=pi3-disable-bt
                                    

                                    and on /boot/cmdline.txt remove

                                    serial console than its looks like

                                    dwc_otg.lpm_enable=0 console=tty1 root=PARTUUID=e13fdf55-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
                                    

                                    Regards

                                    Vesa KauppinenV 1 Reply Last reply
                                    Reply Quote 0
                                    • Vesa KauppinenV
                                      Vesa Kauppinen @unix
                                      last edited by

                                      @unix

                                      Thank you for answer!

                                      BT disabled and cmdline.txt edited...

                                      No success

                                      @tomas_hora any ideas?

                                      Vesa

                                      1 Reply Last reply
                                      Reply Quote 0
                                      • roberts_landoR
                                        roberts_lando
                                        last edited by

                                        I always had compatibility problems when using Raspbian Stretch, try to use last Raspbian Jessie img and it should work

                                        Vesa KauppinenV 1 Reply Last reply
                                        Reply Quote 0
                                        • Vesa KauppinenV
                                          Vesa Kauppinen @roberts_lando
                                          last edited by Vesa Kauppinen

                                          @roberts_lando

                                          Thank you for answer!

                                          Now i have tried with Rasbian Jessie Lite.....no success :disappointed:

                                          Do you use Jessie Lite or full?

                                          Thanks,
                                          Vesa

                                          roberts_landoR 1 Reply Last reply
                                          Reply Quote 0
                                          • roberts_landoR
                                            roberts_lando @Vesa Kauppinen
                                            last edited by

                                            @Vesa-Kauppinen I think you have missed one or more step of the turorial. I suggest you to retry the tutorial and check if an instruction fails. Do you have switch on the GPRS module?

                                            1 Reply Last reply
                                            Reply Quote 0

                                            Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                            Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                            With your input, this post could be even better 💗

                                            Register Login
                                            • First post
                                              Last post