Robustness of SD card vs eMMC in case of power outage
-
There are a few discussions regarding SD card corruption, e.g. SD Card fails after current cut. In that thread @Martin-Kudláček mentions an "upgrade" to eMMC as a potential solution - e.g. using Patron instead of Neuron devices. In principle this makes sense, but I'd like to get clear on just how much of a difference this makes.
The eMMC modules in Patron devices are based on MLC technology, which would in theory be less robust than a high-quality SD card based on SLC or pSLC technology (link). But maybe the fact that it's a soldered-on eMMC module makes things better? Maybe the eMMC controller is better/smarter?
I've looked around the internet but did not find great comparisons of SD cards vs eMMC in this context. The general narrative is that eMMC is quite similar to having a "soldered-on" SD card. This often leads to better read/write performance, but it's not clear whether there's improved robustness in case of power outage. Any info from the community would be welcome!
EDIT: Unfortunately looks like I posted this in the "Mervis" category. Is there a way to move it? Or do I need to delete and re-create it elsewhere?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login