• Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Groups
    • Search
    • Register
    • Login

    Multiple xS50 on a L513 (RS485)

    Scheduled Pinned Locked Moved Official API - Evok
    29 Posts 5 Posters 18.3k Views 3 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • S
      salorob
      last edited by

      I can give you ssh access ? please mail me at robert at ropesolutions.nl, I will supply you the details.

      Martin KudláčekM 1 Reply Last reply
      Reply Quote 0
      • Martin KudláčekM
        Martin Kudláček @salorob
        last edited by

        @salorob I just sent you the mail.

        1 Reply Last reply
        Reply Quote 0
        • B
          bsc101 @Martin Kudláček
          last edited by

          @martin-kudláček Just a quick question, since I also do have this problem with my xS50: Will there be some easy way to upgrade the firmware of the extension? What is the procedure of updating the firmware? Thanks for your answer!
          Regards,
          Boris

          Martin KudláčekM 1 Reply Last reply
          Reply Quote 0
          • Martin KudláčekM
            Martin Kudláček @bsc101
            last edited by

            @bsc101 The way to check and update the firmware is fairly easy - just connect the extension via RS485 to the controller, ssh into the controller and run a program. I will write down a tutorial how to do so. We just want to be extra sure, that this problem is tied down to the extension's firmware. I do apologize for this incovenience.

            B 1 Reply Last reply
            Reply Quote 0
            • B
              bsc101 @Martin Kudláček
              last edited by

              @martin-kudláček Sounds good, thanks for your efforts!

              Martin KudláčekM 1 Reply Last reply
              Reply Quote 0
              • Martin KudláčekM
                Martin Kudláček @bsc101
                last edited by Martin Kudláček

                Ok, the issue is definitely with the extension firmware 5.6. The current version is 5.18 and for some reason, both of you received extension units with the old firmware... We do apologize for this, if it is even possible.

                The @salorob was able to flash the firmware by his own via our Windows application tool. Unfortunately, the tool is also long time waiting for the update, so the firmware version in this tool is only 5.9, instead of 5.18.

                So the official hacker's tutorial is:

                1. SSH into your controller, the user "pi", the password (if not changed) is "raspberry". If your image is Raspbian, you need to install additional packages:
                pi@raspberrypi:~ $ sudo bash
                root@raspberrypi:/home/pi# echo "deb https://files.unipi.technology/debian stretch main" > /etc/apt/sources.list.d/unipi.list
                root@raspberrypi:/home/pi# wget -O - https://files.unipi.technology/debian/unipi_pub.gpg | apt-key add
                root@raspberrypi:/home/pi# apt update
                root@raspberrypi:/home/pi# apt install -y neuron-firmware neuron-modbus-tools
                
                1. Connect the extension to the controller over RS485. If you have multiple extensions, connect only one at a time. Right now, all of them thinks they have address 15, so you need to avoid collisions.

                2. Confirm, you have a connection to extension

                root@L503-sn101:/home/pi# /opt/neuron-bin/fwserial -p /dev/extcomm/0/0 
                Boardset:     5 E-14Ro_P-11DiR485              (v1.0)
                Baseboard:    2 E-14Ro                         (v1.0)
                Firmware: v5.6
                Modbus timeout set
                
                1. Flash the firmware
                root@L503-sn101:/opt/fw# /opt/neuron-bin/fwserial -p /dev/extcomm/0/0 -PR
                Boardset:     5 E-14Ro_P-11DiR485              (v1.0)
                Baseboard:    2 E-14Ro                         (v1.0)
                Firmware: v5.6
                Modbus timeout set
                Programming page 00 ...Finished programming chunk 0, ret: 64 err: 0
                Finished programming chunk 1, ret: 64 err: 0
                Finished programming chunk 2, ret: 64 err: 0
                Finished programming chunk 3, ret: 64 err: 0
                Finished programming chunk 4, ret: 64 err: 0
                Finished programming chunk 5, ret: 64 err: 0
                Finished programming chunk 6, ret: 64 err: 0
                Finished programming chunk 7, ret: 64 err: 0
                Page written OK.
                
                Programming page 01 ...Finished programming chunk 0, ret: 64 err: 0
                ..........
                
                1. Verify the firmware. Since the flashed firmware now accepts address set by DIP switches, you need to specify the address in the parameter -u. My extension has address 3
                root@L503-sn101:/opt/fw# /opt/neuron-bin/fwserial -p /dev/extcomm/0/0 -u 3
                Boardset:     5 E-14Ro_P-11DiR485              (v1.0)
                Baseboard:    2 E-14Ro                         (v1.0)
                Firmware: v5.18
                Modbus timeout set
                
                1. Repeat the process for all of the extensions

                Let me know, how it worked. If you don't want to flash the firmware yourself, let me know and we can arrange some remote session with you.

                Thanks,
                Martin

                B 1 Reply Last reply
                Reply Quote 0
                • B
                  bsc101 @Martin Kudláček
                  last edited by

                  @martin-kudláček Thanks a lot, it works now :) I can set another address than default now!
                  Firmware is now 5.9 (it was 5.6 as you said), is there any need to upgrade to 5.18?

                  Martin KudláčekM 1 Reply Last reply
                  Reply Quote 0
                  • Martin KudláčekM
                    Martin Kudláček @bsc101
                    last edited by

                    @bsc101 So I guess you used the Windows firmware update tool as @salorob. There are definitely a bugfixes from version 5.9 with some new functionality as well. You have the tutorial above, so you can update it, if you find out you need it.

                    B 2 Replies Last reply
                    Reply Quote 0
                    • B
                      bsc101 @Martin Kudláček
                      last edited by bsc101

                      This post is deleted!
                      1 Reply Last reply
                      Reply Quote 0
                      • B
                        bsc101 @Martin Kudláček
                        last edited by

                        @martin-kudláček My fault, did not do step 1 in your decsription above since fwserial and firmware files were already present. It's 5.18 now, thank you!

                        1 Reply Last reply
                        Reply Quote 1
                        • B
                          Boy Lenssen
                          last edited by Boy Lenssen

                          Ok, took a while before I had time to do this, but now the downloads don't seem to work anymore, check below (btw, I'm using an own build image, not the Neuron image):

                          root@L203-sn81:/home/pi# wget -O - https://files.unipi.technology/debian/unipi_pub.gpg | apt-key add\
                          > ^C
                          root@L203-sn81:/home/pi# wget -O - https://files.unipi.technology/debian/unipi_pub.gpg | apt-key add
                          --2019-09-12 08:05:48--  https://files.unipi.technology/debian/unipi_pub.gpg
                          Resolving files.unipi.technology (files.unipi.technology)... 86.49.170.141
                          Connecting to files.unipi.technology (files.unipi.technology)|86.49.170.141|:443... connected.
                          HTTP request sent, awaiting response... 302 Found
                          Location: https://kb.unipi.technology/debian/unipi_pub.gpg [following]
                          --2019-09-12 08:05:49--  https://kb.unipi.technology/debian/unipi_pub.gpg
                          Resolving kb.unipi.technology (kb.unipi.technology)... 86.49.170.141
                          Connecting to kb.unipi.technology (kb.unipi.technology)|86.49.170.141|:443... connected.
                          HTTP request sent, awaiting response... 200 OK
                          Length: unspecified [text/html]
                          Saving to: 'STDOUT'
                          
                          -                                                     [ <=>                                                                                                       ]  13.43K  --.-KB/s    in 0.03s   
                          
                          2019-09-12 08:05:49 (385 KB/s) - written to stdout [13757]
                          
                          gpg: no valid OpenPGP data found.
                          root@L203-sn81:/home/pi# apt update
                          Get:1 http://archive.raspberrypi.org/debian stretch InRelease [25.4 kB]
                          Get:2 http://raspbian.raspberrypi.org/raspbian stretch InRelease [15.0 kB]
                          Get:3 http://raspbian.raspberrypi.org/raspbian stretch/contrib Sources [75.2 kB]      
                          Get:5 http://raspbian.raspberrypi.org/raspbian stretch/non-free Sources [125 kB]                            
                          Get:6 http://archive.raspberrypi.org/debian stretch/main armhf Packages [221 kB]                                                         
                          Get:7 http://raspbian.raspberrypi.org/raspbian stretch/main Sources [9721 kB]                                                            
                          Get:8 http://archive.raspberrypi.org/debian stretch/ui armhf Packages [45.0 kB]
                          Err:4 https://kb.unipi.technology/debian stretch InRelease  
                            Clearsigned file isn't valid, got 'NOSPLIT' (does the network require authentication?)
                          Get:9 http://raspbian.raspberrypi.org/raspbian stretch/main armhf Packages [11.7 MB]
                          Get:10 http://raspbian.raspberrypi.org/raspbian stretch/contrib armhf Packages [56.9 kB]                                                                                                            
                          Get:11 http://raspbian.raspberrypi.org/raspbian stretch/non-free armhf Packages [95.5 kB]                                                                                                           
                          Fetched 22.1 MB in 18s (1192 kB/s)                                                                                                                                                                  
                          Reading package lists... Done
                          E: Failed to fetch https://files.unipi.technology/debian/dists/stretch/InRelease  Clearsigned file isn't valid, got 'NOSPLIT' (does the network require authentication?)
                          E: Some index files failed to download. They have been ignored, or old ones used instead.
                          root@L203-sn81:/home/pi# apt install -y neuron-firmware neuron-modbus-tools
                          Reading package lists... Done
                          Building dependency tree       
                          Reading state information... Done
                          Note, selecting 'unipi-modbus-tools' instead of 'neuron-modbus-tools'
                          E: Unable to locate package neuron-firmware
                          root@L203-sn81:/home/pi# /opt/neuron-bin/fwserial -p /dev/extcomm/0/0 
                          bash: /opt/neuron-bin/fwserial: No such file or directory
                          
                          1 Reply Last reply
                          Reply Quote 0
                          • B
                            Boy Lenssen
                            last edited by Boy Lenssen

                            So I tried with an official Unipian image, but still same problem. Some security issue (gpg: no valid OpenPGP data found). Please help @tomas_hora @Martin-Kudláček

                            1 Reply Last reply
                            Reply Quote 0
                            • T
                              tomas_hora administrators
                              last edited by tomas_hora

                              The files has been moved into a new repostirory: https://repo.unipi.technology/debian/ The FW tool for extension can be found here https://kb.unipi.technology/files:software:tools:00-start#extension_firmware_update_tool

                              1 Reply Last reply
                              Reply Quote 0
                              • B
                                Boy Lenssen
                                last edited by Boy Lenssen

                                Thanks! I was able to flash the device using the FW update tool and now it says it v5.36 on it.

                                Too bad I'm not able to try it out now, as on my test Unipi I accidentally plugged in the power supply on the RS485 port and now I get

                                root@L203-sn81:/home/pi# /opt/unipi-bin/fwserial -p /dev/extcomm/0/0
                                Read version failed: Connection timed out
                                

                                Will need to get a new Neuron for this.
                                Thanks for the help! :)

                                T 1 Reply Last reply
                                Reply Quote 0
                                • T
                                  tomas_hora administrators @Boy Lenssen
                                  last edited by

                                  @boy-lenssen Yeah, that's something we are working on to protect bricking the units during the FW upgrade process. If the RUN led is dead, send it to us so we can reflash the FW.

                                  1 Reply Last reply
                                  Reply Quote 0

                                  Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                  Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                  With your input, this post could be even better 💗

                                  Register Login
                                  • First post
                                    Last post