Hello
I'm trying to configure Mervis to use the scada, but I don't have the same screens as the tutorial (see appendix) could you help me(https://1drv.ms/w/s!Aq__SFpXusxkgcYpxOZEcucrK36pMA?e=gRy2i8)
Posts made by msoenen
-
Configuration mervi for scada impossible
-
RE: SD Card fails after current cut
Hello
Thanks for answer
I will try to make a backup power supply with batteries so as not to have sudden stops
-
SD Card fails after current cut
Hello
for the second time, the program of my L 203 no longer works, and the SD card is out of order, and it happens when there is a power cut. luckily I made a copy of the map. these are good quality cards. do you know the cause? A solution to avoid the problem, with batteries? thank you in advance -
RE: Loss of connection with PLC
Problem solved, I did a complete reinstallation in version 2.2, because version 2.3 does not work for me
thanks
-
RE: Loss of connection with PLC
Hello
Yes, I can see the PLC
in the appendix, the screenshots that I see
I checked the IP address on my router and it is 192.168.1.40
I already had problems when switching to 2.2, because by 2 times, the variables were duplicated, and the plc no longer worked, and I had to delete all the duplicate variables, and it's a big job[texte du lien]
(https://1drv.ms/u/s!Aq__SFpXusxkgbsO0aXb02aOyHXhSw?e=aNadYM)
https://1drv.ms/u/s!Aq__SFpXusxkyDClTBLXk0QoVXnV?e=0JOTym
https://1drv.ms/u/s!Aq__SFpXusxkgbsQjvU4ZrB13xv5kQ?e=YiRcp7
https://1drv.ms/u/s!Aq__SFpXusxkgbsN7vJdQ1gMJYMJqg?e=TwS47KThanks on adavance for you help
-
Loss of connection with PLC
Hello
I need your help, I no longer have communication with the PLC. I wanted to go from IDE 2.2 to 2.3 (with os 2.2) to do a scada project. When I uploaded, I lost communication. I already had several problems going from 2.0 to 2.2 because I had all the variables have been duplicated. I have attached a screenshot with the faults
https://1drv.ms/u/s!Aq__SFpXusxkgbsM6_HIUKDZaBI6aQ?e=S2MA0FThank you in advance for your assistance```
Insert Code Here -
Average a temperature measurement
Hello, I would like to make a sliding average of the 1-wire temperature measurement. AVG function blos average several probes. how can I do ? thank you in advance
-
RE: Light control and All Out
@ecobouwadvies Hello, I did all my lighting with the unipi and it works very well
I did a total closing function, and a patrial closing function to close only one homeland
it is not easy to explain, I attach my solution in the appendix. A word for the unipi team,> Mervis works very well, but is often quite difficult to start to connect variables and also to change version -
APP Mervis android
Hello
Is the mervis mobile app available? if yes, how to get the password
Thanks
-
Compatibility between Neuron with Mervis and Cayenne my-device
Bonjour
Hello
Would it be possible to install the Cayenne my-device software on a Neuron running Mervis
This in order to be able to access remotely and send notifications
If so, will cayenne have access to all the variables?thank you in advance
-
RE: APP Mervis android
@tomas_hora Don't forget us for the evolution of the scada and the mobile app
Thank you for your work and your help when we have problems
happy new year 2020 -
RE: Mervis 2.2
Hello
Is there a specific procedure for installing the new version, and does the resume of programs made by the old version go smoothly?
thanks
-
RE: APP Mervis android
@martin-kudláček
Hello
Are you new to the Mervis mobile application?Thanks
-
APP Mervis android
Hello
I downloaded the Mervis App under android
how can we do to put it in English
How do we connect to our project?
thank you in advance -
RE: Compatibility between Nymea and Mervis
Ok, but on the SD card with Mervis bought with the Neuron, is raspbian installed, or should raspbian be installed, and how?
Thank you
-
RE: Compatibility between Nymea and Mervis
Hello, thanks for the answer
I was seeing the topic, my question is this, is it possible to connect via SSL to change the settings of the Pi3 that is in the Neuron to change the configuration of the wifi, and install an additional program (ex Nymea or other)
thank you in advance
-
RE: Compatibility between Nymea and Mervis
I saw on your site, the following project `` `
(https://www.unipi.technology/reference/hot-tub-automation-using-the-unipi-1-1-229)
or unipi is in association with Nyméa to carry out a remote management with smartphone with alarm notification, which is not possible, or difficult via Mervis.
now, if you know another platform compatible with Mervis for with the same possibilities, am I open to any proposals? -
Compatibility between Nymea and Mervis
Hello
is it possible to install the Nyméa interface on a unipi L203 with system mervis? -
RE: Function SendMaiTrig not work
Hello
I looked at this solution, but unless I'm mistaken, it requires a Google G-suite account, a domain name and the service is paid.
everything seems very complicated to send an alarmis there no other way to transmit an alarm?
via the scada? or via an android application?
thank you in advance