• Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Groups
    • Search
    • Register
    • Login
    • Profile
    • Following 0
    • Followers 0
    • Topics 11
    • Shares 0
    • Posts 24
    • Groups 0
    M Offline
    1. Home
    2. mikeardy
    3. Topics

    Topics

    • M

      Codesys on Axon plc?

      Watching Ignoring Scheduled Pinned Locked Moved Axon series
      2
      0 Votes
      2 Posts
      2k Views
      T
      @mikeardy We definitely plan to add support for Codesys runtime on Axons, the question is when. The current plan is to start woking on it in Q1/2019.
    • M

      Multiple Modbus Read Registers Access by an Array of Elements

      Watching Ignoring Scheduled Pinned Locked Moved CODESYS
      2
      0 Votes
      2 Posts
      2k Views
      D
      @mikeardy Consider this as an alternative. I've created 500 holding registers [image: 0_1524082533025_img1.png] In my program (it could be ina GVL) I have created an addary of 250 UDINT. [image: 0_1524082629032_img2.png] Then I was able to map all of the registers in one go [image: 0_1524082699632_img3.png] For generic CODESYS questions I suggest trying https://forum.codesys.com/, for many generic CODESYS questions there will already be an answer posted.
    • M

      Configure Neuron S103x as Modbus Slave

      Watching Ignoring Scheduled Pinned Locked Moved CODESYS
      5
      0 Votes
      5 Posts
      3k Views
      M
      Thank you. I will try.
    • M

      SFTP access to Neuron directories

      Watching Ignoring Scheduled Pinned Locked Moved General Discussion
      12
      0 Votes
      12 Posts
      7k Views
      M
      ok I will try to use the /home/pi/ folder.
    • M

      Neuron S103 and fast input (or counter)

      Watching Ignoring Scheduled Pinned Locked Moved CODESYS
      5
      0 Votes
      5 Posts
      3k Views
      M
      thank you
    • M

      Setting Static IP Address on Neuron

      Watching Ignoring Scheduled Pinned Locked Moved Neuron Series
      2
      0 Votes
      2 Posts
      3k Views
      T
      @mikeardy The IP address should be changed in /etc/network/interfaces
    • M

      Expansion Modbus I/O and RS232 Module

      Watching Ignoring Scheduled Pinned Locked Moved Neuron Series
      2
      0 Votes
      2 Posts
      2k Views
      T
      @mikeardy It's not good idea to mix RS232 and Modbus. You would need something like this for Modbus RTU RS485 extension https://www.unipi.technology/extension-modules-c13
    • M

      UniPi Neuron and Variable Retain, WiFi, Bluetooth

      Watching Ignoring Scheduled Pinned Locked Moved CODESYS
      2
      0 Votes
      2 Posts
      2k Views
      D
      Hi Mike, This has been an on-going topic for CODESYS on the Raspberry Pi. The Raspberry Pi does not have non-volatile RAM, and so the built in PERSISTENT and RETAIN variables within IEC61131 do not function. The neatest solution I have seen is discussed in this forum posthttps://forum.codesys.com/viewtopic.php?t=5722 where 3S have provided some sample code that can write retain variables to a file on demand and then restore at power up. Be careful about writing too frequently to the SDCard as you increase the chance of file system corruption if the power is interrupted whilst writing. Regarding wifi, CODESYS relays on the underlying Raspbian configuration. So yes you can enable WiFi and it will work. There is a discussion on how to do this on the UniPi forum https://forum.unipi.technology/topic/438/wifi-instead-nic-mervis the process is the same. I have no experience of using Bluetooth with CODESYS. I suggest contacting 3S or using the CODESYS forum. regards David
    • M

      Using USB Ports to connect a RS232/USB converter

      Watching Ignoring Scheduled Pinned Locked Moved CODESYS
      3
      0 Votes
      3 Posts
      5k Views
      G
      Hi..i am a new user here. As per my knowledge many times you would not use the power from the USB-UART converter. The target device will provide power to the UART. All you need to connect is Rx,Tx and Ground. The TTL signals come in different flavors. 5V, 3.3V and 1.7V being common. This is all the more reason why not to use the power from the UART adapter. Put 5V TTL on 1.7V TTL pins and something will fry. Use no power from the UART adapter. percentage calculator
    • M

      Neuron variable retain ability...

      Watching Ignoring Scheduled Pinned Locked Moved Neuron Series
      2
      0 Votes
      2 Posts
      2k Views
      T
      Neuron is capable of preserving variable state using the MMC drive. Unfortunately I do not know whether the current CODESYS implementation makes use of this functionality, though I do not believe so. The CODESYS subforum may be able to provide a better answer. In the Axon series we have implemented better means for storing internal state, with fast flash memory used for counters and a replacement for the somewhat lacklucstre MMC arrangement on Neuron. This product line is however still in development, and will be for the next couple of months.
    • M

      CODESYS on UniPi Neuron installing issues... help please!

      Watching Ignoring Scheduled Pinned Locked Moved CODESYS
      6
      0 Votes
      6 Posts
      4k Views
      M
      Many Thanks!