• Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Groups
    • Search
    • Register
    • Login

    Cannot uprgrading firmware

    Scheduled Pinned Locked Moved Neuron Series
    5 Posts 2 Posters 2.1k Views 2 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • P
      paolo
      last edited by paolo

      Hello,
      When I run the command /opt/unipi/tools/fwspi -i 0 I get this error
      ARMINIT: Cannot open device /dev/unipispi
      Unable to create the arm[0] context
      What can I do? Thanks

      that's my disto:
      Linux L203-sn121 6.6.31-v8 #1 SMP PREEMPT Fri Jun 28 10:02:55 UTC 2024 aarch64

      C 1 Reply Last reply
      Reply Quote 0
      • C
        cleve administrators @paolo
        last edited by

        @paolo
        Hello,
        Two issues there:

        • You need to run the command as root (with sudo)
        • -i parameter is not valid for unipi-kernel-modules >= 2.0, you need to use the -u parameter, see help with --help.

        Best regards,
        Kryštof Černý - Unipi engineer

        P 1 Reply Last reply
        Reply Quote 0
        • P
          paolo @cleve
          last edited by paolo

          @cleve Thank you very much, but I don't understand what I should do next...
          here's what I did:

          unipi@L203-sn121:~$ sudo /opt/unipi/tools/fwspi -u 1
          Boardset:     0 B-1000                         (v1.0)
          Baseboard:    0 B-1000                         (v1.0)
          Firmware: v5.3 (for 0-1)
          PLEASE UPGRADE FIRMWARE TO 6.30 - to proceed, execute fwspi -P -U
          

          And that :

          unipi@L203-sn121:~$ sudo /opt/unipi/tools/fwspi -u 1 -P
          Boardset:     0 B-1000                         (v1.0)
          Baseboard:    0 B-1000                         (v1.0)
          Firmware: v5.3 (for 0-1)
          PLEASE UPGRADE FIRMWARE TO 6.30 - to proceed, execute fwspi -P -U
          Cannot open file /opt/unipi/firmware/B-1000-1.bin
          
          C 1 Reply Last reply
          Reply Quote 0
          • C
            cleve administrators @paolo
            last edited by

            Hello @paolo,
            just do as the command says, you need to add "-U" to upgrade the firmware from v5.x to v6.x.

            Best regards,
            Kryštof Černý - Unipi engineer

            P 1 Reply Last reply
            Reply Quote 1
            • P
              paolo @cleve
              last edited by

              Thank you @cleve
              It works with

              unipi@L203-sn121:~$ sudo /opt/unipi/tools/fwspi -u 1 -P -U
              unipi@L203-sn121:~$ sudo /opt/unipi/tools/fwspi -u 2 -P -U
              unipi@L203-sn121:~$ sudo /opt/unipi/tools/fwspi -u 3 -P -U
              
              1 Reply Last reply
              Reply Quote 0

              Hello! It looks like you're interested in this conversation, but you don't have an account yet.

              Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

              With your input, this post could be even better 💗

              Register Login
              • First post
                Last post