Cannot uprgrading firmware
-
Hello,
When I run the command/opt/unipi/tools/fwspi -i 0I get this error
ARMINIT: Cannot open device /dev/unipispi
Unable to create the arm[0] context
What can I do? Thanksthat's my disto:
Linux L203-sn121 6.6.31-v8 #1 SMP PREEMPT Fri Jun 28 10:02:55 UTC 2024 aarch64 -
@paolo
Hello,
Two issues there:- You need to run the command as root (with sudo)
- -i parameter is not valid for unipi-kernel-modules >= 2.0, you need to use the -u parameter, see help with --help.
-
@cleve Thank you very much, but I don't understand what I should do next...
here's what I did:unipi@L203-sn121:~$ sudo /opt/unipi/tools/fwspi -u 1 Boardset: 0 B-1000 (v1.0) Baseboard: 0 B-1000 (v1.0) Firmware: v5.3 (for 0-1) PLEASE UPGRADE FIRMWARE TO 6.30 - to proceed, execute fwspi -P -UAnd that :
unipi@L203-sn121:~$ sudo /opt/unipi/tools/fwspi -u 1 -P Boardset: 0 B-1000 (v1.0) Baseboard: 0 B-1000 (v1.0) Firmware: v5.3 (for 0-1) PLEASE UPGRADE FIRMWARE TO 6.30 - to proceed, execute fwspi -P -U Cannot open file /opt/unipi/firmware/B-1000-1.bin -
Hello @paolo,
just do as the command says, you need to add "-U" to upgrade the firmware from v5.x to v6.x. -
Thank you @cleve
It works withunipi@L203-sn121:~$ sudo /opt/unipi/tools/fwspi -u 1 -P -U unipi@L203-sn121:~$ sudo /opt/unipi/tools/fwspi -u 2 -P -U unipi@L203-sn121:~$ sudo /opt/unipi/tools/fwspi -u 3 -P -U
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login