Installation manual Node-RED (use at your own risk)
-
Dear community,
I get a lot of questions how to install Node-RED in the Unipi Axon. Because I'm grateful for this product of Unipi I am happy to share some knowledge:
Put the latest Unipi Axon Open Source image on a 16GB using FAT32. Flash Axon.
sudo su
apt-get update
apt-get upgrade
rebootsudo su
apt-get install evok
systemctl enable evok
rebootsudo su
apt-get install build-essential
apt-get install curl software-properties-common
rebootInstall NodeJS and Node-RED. !!Answer Yes to all except for installing standard Raspberry Pi nodes!!
sudo su
bash <(curl -sL https://raw.githubusercontent.com/node-red/linux-installers/master/deb/update-nodejs-and-nodered)
systemctl enable nodered.service
rebootDon't mind the errors of installing node-red-admin:
sudo su
apt-get install nano
npm install -g node-red-admin
rebootSecuring Node-RED: https://nodered.org/docs/user-guide/runtime/securing-node-red
Hash, copy and paste password:sudo su
node-red-admin hash-pw
cd .node-red
nano /root/.node-red/settings.js
rebootCopy the following:
allow-hotplug eth0
iface eth0 inet static
address 192.168.1.101
netmask 255.255.255.0
broadcast 192.168.1.255
network 192.168.1.0
gateway 192.168.1.1and paste into file eth0:
sudo su
nano /etc/network/interfaces.d/eth0reboot
Change password Unipi:
sudo su
passwd unipi
rebootsudo dpkg-reconfigure tzdata
I hope this helps you to get more out of your Unipi Axon!
Beste regards,
Wesley -
Hello @WesleyFranken,
we have dedicated Node-RED images for all our PLCs. They also contain example program with Dashboard UI: https://kb.unipi.technology/en:sw:03-3rd-party:nodered -
@Martin-Kudláček From today that is ;-)
Thanks!
-
Well @WesleyFranken, for Axon and Neuron, we have the image for a few weeks;) It just wasn't presented to the public, only as a download on the said page. From yesterday, we have the image for all three platforms.
-
No need to defend yourself, you are doing a good job 😉
-
Hello I have istalled the Node red image on Unipi 1.1 but no desktop...only command line. How to RU or install the PI desktop please??
-
Hello @FabioIT,
the Node-RED image is defacto a Raspberry Pi OS. You can proceed with any general tutorial for adding the desktop environment, which you can find on the offical Raspberry Pi OS webpage.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login