After upgrading the M503, circuit 1 completely disappeared.
-
So what do you see when you run /opt/unipi/tools# ./fwspi -i 0 ... /opt/unipi/tools# ./fwspi -i 1 and /opt/unipi/tools# ./fwspi -i 2?
-
Hi @tomas_hora
root@residevice:/opt/unipi/tools# ./fwspi -i 0 Boardset: 0 B-1000 (v1.0) Baseboard: 0 B-1000 (v1.0) Firmware: v5.31 root@residevice:/opt/unipi/tools# ./fwspi -i 1 Unable to create the arm[1] context root@residevice:/opt/unipi/tools# ./fwspi -i 2 Unable to create the arm[2] context/Vesa
-
Just to be sure... Is the RUN2 LED blinking or not? What is the output of "dmesg | grep UNIPISPI" ?
-
@tomas_hora said in After upgrading the M503, circuit 1 completely disappeared.:
dmesg | grep UNIPISPI
The device is hundreds of miles away, so I can't watch the LEDs.
dmesg | grep UNIPISPI doesn't output anything.
/Vesa
-
-
Hello @Vesa-Kauppinen,
it seems you do not have the unipi kernel module loaded. Can you try "lsmod | grep unipi"? If it still does not give any output, try to update unipi packages again.
-
@martin_triska said in After upgrading the M503, circuit 1 completely disappeared.:
lsmod | grep unipi
Hi @martin_triska,
Thank you for your answer! I got the following answer:
root@residevice:~# lsmod | grep unipi unipi 94208 0 industrialio 73728 1 unipi -
Hi @vesa-kauppinen,
can you send us SSH access to the PLC? Let's continue over [email protected]Thanks,
Martin -
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login