• Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Groups
    • Search
    • Register
    • Login

    After upgrading the M503, circuit 1 completely disappeared.

    Scheduled Pinned Locked Moved Official API - Evok
    11 Posts 4 Posters 4.1k Views 1 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Vesa KauppinenV
      Vesa Kauppinen
      last edited by

      Hi,

      I did the following for the Neuron M503 with Raspbian Stretch Lite and old EVOK:

      sudo su 
      systemctl stop neurontcp && systemctl stop evok
      
      bash /opt/evok/uninstall-evok.sh
      rm -rf /var/www/evok
      rm /etc/systemd/system/evok.service
      
      sudo su 
      echo "deb https://repo.unipi.technology/debian stretch main" >> /etc/apt/sources.list.d/unipi.list
      wget https://repo.unipi.technology/debian/unipi_pub.gpg -O - | apt-key add
      apt update
      apt upgrade -y
      reboot
      
      sudo su
      apt install -y neuron-kernel unipi-firmware unipi-modbus-tools
      apt autoremove -y
      
      apt install nginx -y
      rm -f /etc/nginx/sites-enabled/default
      apt install evok -y
      systemctl enable evok
      reboot
      

      Firmware:

      root@residevice:/opt/unipi/tools# ./fwspi -i 0
      Boardset:     0 B-1000                         (v1.0)
      Baseboard:    0 B-1000                         (v1.0)
      Firmware: v5.31
      

      After update there is no circuit 1_ :

      root@residevice:~# wget http://localhost:8080/rest/all
      
      [{
      		"counter_modes": ["Enabled", "Disabled"],
      		"glob_dev_id": 1,
      		"modes": ["Simple", "DirectSwitch"],
      		"value": 0,
      		"circuit": "2_05",
      		"debounce": 50,
      		"counter": 0,
      		"counter_mode": "Enabled",
      		"dev": "input",
      		"mode": "Simple"
      	}, {
      		"counter_modes": ["Enabled", "Disabled"],
      		"glob_dev_id": 1,
      		"modes": ["Simple", "DirectSwitch"],
      		"value": 0,
      		"circuit": "2_04",
      		"debounce": 50,
      		"counter": 0,
      		"counter_mode": "Enabled",
      		"dev": "input",
      		"mode": "Simple"
      	}, {
      		"counter_modes": ["Enabled", "Disabled"],
      		"glob_dev_id": 1,
      		"modes": ["Simple", "DirectSwitch"],
      		"value": 0,
      		"circuit": "2_06",
      		"debounce": 50,
      		"counter": 0,
      		"counter_mode": "Enabled",
      		"dev": "input",
      		"mode": "Simple"
      	},
      	{
      		"counter_modes": ["Enabled", "Disabled"],
      		"glob_dev_id": 1,
      		"modes": ["Simple", "DirectSwitch"],
      		"value": 0,
      		"circuit": "2_01",
      		"debounce": 50,
      		"counter": 0,
      		"counter_mode": "Enabled",
      		"dev": "input",
      		"mode": "Simple"
      	},
      	{
      		"counter_modes": ["Enabled", "Disabled"],
      		"glob_dev_id": 1,
      		"modes": ["Simple", "DirectSwitch"],
      		"value": 0,
      		"circuit": "2_03",
      		"debounce": 50,
      		"counter": 0,
      		"counter_mode": "Enabled",
      		"dev": "input",
      		"mode": "Simple"
      	}, {
      		"counter_modes": ["Enabled", "Disabled"],
      		"glob_dev_id": 1,
      		"modes": ["Simple", "DirectSwitch"],
      		"value": 0,
      		"circuit": "2_02",
      		"debounce": 50,
      		"counter": 0,
      		"counter_mode": "Enabled",
      		"dev": "input",
      		"mode": "Simple"
      	},
      	{
      		"glob_dev_id": 1,
      		"modes": ["Simple"],
      		"value": 0,
      		"circuit": "2_05",
      		"pending": false,
      		"relay_type": "physical",
      		"dev": "relay",
      		"mode": "Simple"
      	}, {
      		"glob_dev_id": 1,
      		"modes": ["Simple"],
      		"value": 0,
      		"circuit": "2_04",
      		"pending": false,
      		"relay_type": "physical",
      		"dev": "relay",
      		"mode": "Simple"
      	}, {
      		"glob_dev_id": 1,
      		"modes": ["Simple"],
      		"value": 0,
      		"circuit": "2_01",
      		"pending": false,
      		"relay_type": "physical",
      		"dev": "relay",
      		"mode": "Simple"
      	},
      	{
      		"glob_dev_id": 1,
      		"modes": ["Simple"],
      		"value": 0,
      		"circuit": "2_03",
      		"pending": false,
      		"relay_type": "physical",
      		"dev": "relay",
      		"mode": "Simple"
      	},
      	{
      		"glob_dev_id": 1,
      		"modes": ["Simple"],
      		"value": 0,
      		"circuit": "2_02",
      		"pending": false,
      		"relay_type": "physical",
      		"dev": "relay",
      		"mode": "Simple"
      	},
      	{
      		"glob_dev_id": 1,
      		"unit": "V",
      		"value": 3.858161211013794,
      		"circuit": "2_04",
      		"range_modes": ["0.0", "2.5", "10.0"],
      		"modes": ["Voltage", "Current", "Resistance"],
      		"range": "10.0",
      		"dev": "ai",
      		"mode": "Voltage"
      	}, {
      		"glob_dev_id": 1,
      		"unit": "V",
      		"value": 3.7661192417144775,
      		"circuit": "2_01",
      		"range_modes": ["0.0", "2.5", "10.0"],
      		"modes": ["Voltage", "Current", "Resistance"],
      		"range": "10.0",
      		"dev": "ai",
      		"mode": "Voltage"
      	},
      	{
      		"glob_dev_id": 1,
      		"unit": "V",
      		"value": 3.1529541015625,
      		"circuit": "2_03",
      		"range_modes": ["0.0", "2.5", "10.0"],
      		"modes": ["Voltage", "Current", "Resistance"],
      		"range": "10.0",
      		"dev": "ai",
      		"mode": "Voltage"
      	}, {
      		"glob_dev_id": 1,
      		"unit": "V",
      		"value": 3.2787086963653564,
      		"circuit": "2_02",
      		"range_modes": ["0.0", "2.5", "10.0"],
      		"modes": ["Voltage", "Current", "Resistance"],
      		"range": "10.0",
      		"dev": "ai",
      		"mode": "Voltage"
      	}, {
      		"modes": ["Voltage"],
      		"value": 0.0,
      		"glob_dev_id": 1,
      		"dev": "ao",
      		"circuit": "2_04",
      		"unit": "V",
      		"mode": "Voltage"
      	},
      	{
      		"modes": ["Voltage"],
      		"value": 0.0,
      		"glob_dev_id": 1,
      		"dev": "ao",
      		"circuit": "2_01",
      		"unit": "V",
      		"mode": "Voltage"
      	}, {
      		"modes": ["Voltage"],
      		"value": 0.0,
      		"glob_dev_id": 1,
      		"dev": "ao",
      		"circuit": "2_03",
      		"unit": "V",
      		"mode": "Voltage"
      	}, {
      		"modes": ["Voltage"],
      		"value": 0.0,
      		"glob_dev_id": 1,
      		"dev": "ao",
      		"circuit": "2_02",
      		"unit": "V",
      		"mode": "Voltage"
      	},
      	{
      		"interval": 15,
      		"value": 57.75,
      		"circuit": "2812F9A708000074",
      		"address": "2812F9A708000074",
      		"time": 1570600764.403386,
      		"typ": "DS18B20",
      		"lost": false,
      		"dev": "temp"
      	}, {
      		"interval": 15,
      		"value": 41.55,
      		"circuit": "28DEBFA7080000E3",
      		"address": "28DEBFA7080000E3",
      		"time": 1570600765.947099,
      		"typ": "DS18B20",
      		"lost": false,
      		"dev": "temp"
      	},
      	{
      		"interval": 15,
      		"value": 1.95,
      		"circuit": "28753F5F070000BE",
      		"address": "28753F5F070000BE",
      		"time": 1570600769.176165,
      		"typ": "DS18B20",
      		"lost": false,
      		"dev": "temp"
      	},
      	{
      		"interval": 15,
      		"value": 50.55,
      		"circuit": "28FC53C107000006",
      		"address": "28FC53C107000006",
      		"time": 1570600770.86114,
      		"typ": "DS18B20",
      		"lost": false,
      		"dev": "temp"
      	},
      	{
      		"interval": 15,
      		"value": 52.75,
      		"circuit": "287E8DA9080000AD",
      		"address": "287E8DA9080000AD",
      		"time": 1570600767.631405,
      		"typ": "DS18B20",
      		"lost": false,
      		"dev": "temp"
      	},
      	{
      		"circuit": "2_01",
      		"value": 0,
      		"glob_dev_id": 1,
      		"dev": "wd",
      		"timeout": 5000,
      		"was_wd_reset": 0,
      		"nv_save": 0
      	}, {
      		"glob_dev_id": 1,
      		"last_comm": 0.03416609764099121,
      		"ver2": "1.0",
      		"sn": 104,
      		"circuit": "1",
      		"model": "M503",
      		"dev": "neuron",
      		"board_count": 1
      	}
      ]
      

      Suggestions?

      Br,
      Vesa

      1 Reply Last reply
      Reply Quote 0
      • T
        tomas_hora administrators
        last edited by tomas_hora

        So what do you see when you run /opt/unipi/tools# ./fwspi -i 0 ... /opt/unipi/tools# ./fwspi -i 1 and /opt/unipi/tools# ./fwspi -i 2?

        Vesa KauppinenV 1 Reply Last reply
        Reply Quote 0
        • Vesa KauppinenV
          Vesa Kauppinen @tomas_hora
          last edited by

          Hi @tomas_hora

          root@residevice:/opt/unipi/tools# ./fwspi -i 0
          Boardset:     0 B-1000                         (v1.0)
          Baseboard:    0 B-1000                         (v1.0)
          Firmware: v5.31
          
          root@residevice:/opt/unipi/tools# ./fwspi -i 1
          Unable to create the arm[1] context
          
          root@residevice:/opt/unipi/tools# ./fwspi -i 2
          Unable to create the arm[2] context
          

          /Vesa

          1 Reply Last reply
          Reply Quote 0
          • T
            tomas_hora administrators
            last edited by

            Just to be sure... Is the RUN2 LED blinking or not? What is the output of "dmesg | grep UNIPISPI" ?

            Vesa KauppinenV 2 Replies Last reply
            Reply Quote 0
            • Vesa KauppinenV
              Vesa Kauppinen @tomas_hora
              last edited by

              @tomas_hora said in After upgrading the M503, circuit 1 completely disappeared.:

              dmesg | grep UNIPISPI

              The device is hundreds of miles away, so I can't watch the LEDs.

              dmesg | grep UNIPISPI doesn't output anything.

              /Vesa

              1 Reply Last reply
              Reply Quote 0
              • Vesa KauppinenV
                Vesa Kauppinen @tomas_hora
                last edited by

                Hi @tomas_hora,

                Have you come up with new ideas in this regard?

                Br,
                Vesa

                1 Reply Last reply
                Reply Quote 0
                • M
                  martin_triska
                  last edited by

                  Hello @Vesa-Kauppinen,

                  it seems you do not have the unipi kernel module loaded. Can you try "lsmod | grep unipi"? If it still does not give any output, try to update unipi packages again.

                  Vesa KauppinenV 1 Reply Last reply
                  Reply Quote 0
                  • Vesa KauppinenV
                    Vesa Kauppinen @martin_triska
                    last edited by

                    @martin_triska said in After upgrading the M503, circuit 1 completely disappeared.:

                    lsmod | grep unipi

                    Hi @martin_triska,

                    Thank you for your answer! I got the following answer:

                    root@residevice:~# lsmod | grep unipi
                    unipi                  94208  0
                    industrialio           73728  1 unipi
                    
                    Martin KudláčekM 1 Reply Last reply
                    Reply Quote 0
                    • Martin KudláčekM
                      Martin Kudláček @Vesa Kauppinen
                      last edited by

                      Hi @vesa-kauppinen,
                      can you send us SSH access to the PLC? Let's continue over [email protected]

                      Thanks,
                      Martin

                      Vesa KauppinenV 2 Replies Last reply
                      Reply Quote 0
                      • Vesa KauppinenV
                        Vesa Kauppinen @Martin Kudláček
                        last edited by

                        Hi @martin-kudláček

                        I sent email to [email protected]

                        Br,
                        Vesa

                        1 Reply Last reply
                        Reply Quote 0
                        • Vesa KauppinenV
                          Vesa Kauppinen @Martin Kudláček
                          last edited by

                          Hi @martin-kudláček !

                          Did you receive my email?

                          Br,
                          Vesa

                          1 Reply Last reply
                          Reply Quote 0

                          Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                          Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                          With your input, this post could be even better 💗

                          Register Login
                          • First post
                            Last post