PWM setup issue used with codesys
-
Hi, I need help about enabling the PWM from Raspbian. I'm up to date and using Pixel such as Raspbian version. On Codesys I'm using Analog input and digital input, + 2x 1-wire device. Everything work effectively but we are currently needing the PWM output to control Led driver.
Everything is wired correctly according to tutorials. Into unipi the value is a real is I think that's mean 0-10 value.
So is many question come with this issue. Is there something to write into /boot/config.txt to enable the pwm over GPIO 18?
Should we set all power jumper to external?
-
@lefrank01 GPIO18 already used for AO as stated in the documentation
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login