Hello @martin-kudláček, Thanks for the response. I would like to use 12 bit which will enable me the Analog input sampling rate of 240Hz as mentioned in the MCP3422 manual. Is there any way to know how to check if the current ADC resolution is 12 bits? and if it is not the resolution I need, how do I write the configuration register for ADC for 240Hz mode using I2C?
Any suggestions would be helpful.

Thanks in advance,
Rajesh.

Hello. Im using Unipi 1.1 hardware with Raspberry Pi 3b. I would like to know about the sampling rate of Analog Input channels (AI1 and AI2) so that I can use it accordingly in my program.

Thanks.

@martin-kudláček Thanks for the response. Will try that out.

I have Unipi 1.1 connected to Raspberry Pi. I want to use the Analog Output voltage which is coming out from the device. The details in the documentation are a little confusing. What does AOV mean (It is mentioned for external 12V) and to get the output voltage (0-10VDC), should I connect across AO and GND? (I will be using internal 12V from the Unipi itself)