Looks like an apt upgrade was issued without a reboot.
Same thing happened to me after an apt upgrade reboot.
Now your os runs on kernel 4.19 and evok can't access the modules.
I think the kernel modules are incompatible with the new kernel.
Only fresh install of unipian was the easiest way to get the os working again without issuing apt upgrade....
Clean install also fails from a clean raspbian stretch with github install instructions.
second part:
Preconfiguring packages ...
Selecting previously unselected package libjbig0:armhf.
(Reading database ... 34896 files and directories currently installed.)
Preparing to unpack .../00-libjbig0_2.1-3.1_armhf.deb ...
Unpacking libjbig0:armhf (2.1-3.1) ...
Selecting previously unselected package fonts-dejavu-core.
Preparing to unpack .../01-fonts-dejavu-core_2.37-1_all.deb ...
Unpacking fonts-dejavu-core (2.37-1) ...
Selecting previously unselected package fontconfig-config.
Preparing to unpack .../02-fontconfig-config_2.11.0-6.7_all.deb ...
Unpacking fontconfig-config (2.11.0-6.7) ...
Selecting previously unselected package libfontconfig1:armhf.
Preparing to unpack .../03-libfontconfig1_2.11.0-6.7_armhf.deb ...
Unpacking libfontconfig1:armhf (2.11.0-6.7) ...
Selecting previously unselected package libtiff5:armhf.
Preparing to unpack .../04-libtiff5_4.0.8-2+deb9u4_armhf.deb ...
Unpacking libtiff5:armhf (4.0.8-2+deb9u4) ...
Selecting previously unselected package libwebp6:armhf.
Preparing to unpack .../05-libwebp6_0.5.2-1_armhf.deb ...
Unpacking libwebp6:armhf (0.5.2-1) ...
Selecting previously unselected package libxpm4:armhf.
Preparing to unpack .../06-libxpm4_1%3a3.5.12-1_armhf.deb ...
Unpacking libxpm4:armhf (1:3.5.12-1) ...
Selecting previously unselected package libgd3:armhf.
Preparing to unpack .../07-libgd3_2.2.4-2+deb9u5_armhf.deb ...
Unpacking libgd3:armhf (2.2.4-2+deb9u5) ...
Selecting previously unselected package nginx-common.
Preparing to unpack .../08-nginx-common_1.10.3-1+deb9u3_all.deb ...
Unpacking nginx-common (1.10.3-1+deb9u3) ...
Selecting previously unselected package libnginx-mod-http-auth-pam.
Preparing to unpack .../09-libnginx-mod-http-auth-pam_1.10.3-1+deb9u3_armhf.deb ...
Unpacking libnginx-mod-http-auth-pam (1.10.3-1+deb9u3) ...
Selecting previously unselected package libnginx-mod-http-dav-ext.
Preparing to unpack .../10-libnginx-mod-http-dav-ext_1.10.3-1+deb9u3_armhf.deb ...
Unpacking libnginx-mod-http-dav-ext (1.10.3-1+deb9u3) ...
Selecting previously unselected package libnginx-mod-http-echo.
Preparing to unpack .../11-libnginx-mod-http-echo_1.10.3-1+deb9u3_armhf.deb ...
Unpacking libnginx-mod-http-echo (1.10.3-1+deb9u3) ...
Selecting previously unselected package libnginx-mod-http-geoip.
Preparing to unpack .../12-libnginx-mod-http-geoip_1.10.3-1+deb9u3_armhf.deb ...
Unpacking libnginx-mod-http-geoip (1.10.3-1+deb9u3) ...
Selecting previously unselected package libnginx-mod-http-image-filter.
Preparing to unpack .../13-libnginx-mod-http-image-filter_1.10.3-1+deb9u3_armhf.deb ...
Unpacking libnginx-mod-http-image-filter (1.10.3-1+deb9u3) ...
Selecting previously unselected package libnginx-mod-http-subs-filter.
Preparing to unpack .../14-libnginx-mod-http-subs-filter_1.10.3-1+deb9u3_armhf.deb ...
Unpacking libnginx-mod-http-subs-filter (1.10.3-1+deb9u3) ...
Selecting previously unselected package libnginx-mod-http-upstream-fair.
Preparing to unpack .../15-libnginx-mod-http-upstream-fair_1.10.3-1+deb9u3_armhf.deb ...
Unpacking libnginx-mod-http-upstream-fair (1.10.3-1+deb9u3) ...
Selecting previously unselected package libxslt1.1:armhf.
Preparing to unpack .../16-libxslt1.1_1.1.29-2.1+deb9u1_armhf.deb ...
Unpacking libxslt1.1:armhf (1.1.29-2.1+deb9u1) ...
Selecting previously unselected package libnginx-mod-http-xslt-filter.
Preparing to unpack .../17-libnginx-mod-http-xslt-filter_1.10.3-1+deb9u3_armhf.deb ...
Unpacking libnginx-mod-http-xslt-filter (1.10.3-1+deb9u3) ...
Selecting previously unselected package libnginx-mod-mail.
Preparing to unpack .../18-libnginx-mod-mail_1.10.3-1+deb9u3_armhf.deb ...
Unpacking libnginx-mod-mail (1.10.3-1+deb9u3) ...
Selecting previously unselected package libnginx-mod-stream.
Preparing to unpack .../19-libnginx-mod-stream_1.10.3-1+deb9u3_armhf.deb ...
Unpacking libnginx-mod-stream (1.10.3-1+deb9u3) ...
Selecting previously unselected package nginx-full.
Preparing to unpack .../20-nginx-full_1.10.3-1+deb9u3_armhf.deb ...
Unpacking nginx-full (1.10.3-1+deb9u3) ...
Selecting previously unselected package nginx.
Preparing to unpack .../21-nginx_1.10.3-1+deb9u3_all.deb ...
Unpacking nginx (1.10.3-1+deb9u3) ...
Setting up libjbig0:armhf (2.1-3.1) ...
Setting up fonts-dejavu-core (2.37-1) ...
Setting up nginx-common (1.10.3-1+deb9u3) ...
Created symlink /etc/systemd/system/multi-user.target.wants/nginx.service → /lib/systemd/system/nginx.service.
Setting up libnginx-mod-http-subs-filter (1.10.3-1+deb9u3) ...
Setting up libtiff5:armhf (4.0.8-2+deb9u4) ...
Processing triggers for sgml-base (1.29) ...
Setting up libxslt1.1:armhf (1.1.29-2.1+deb9u1) ...
Processing triggers for libc-bin (2.24-11+deb9u4) ...
Processing triggers for systemd (232-25+deb9u12) ...
Setting up libnginx-mod-http-auth-pam (1.10.3-1+deb9u3) ...
Setting up libnginx-mod-http-dav-ext (1.10.3-1+deb9u3) ...
Setting up libnginx-mod-mail (1.10.3-1+deb9u3) ...
Setting up libxpm4:armhf (1:3.5.12-1) ...
Processing triggers for man-db (2.7.6.1-2) ...
Setting up libnginx-mod-http-xslt-filter (1.10.3-1+deb9u3) ...
Setting up libnginx-mod-http-upstream-fair (1.10.3-1+deb9u3) ...
Setting up libnginx-mod-http-geoip (1.10.3-1+deb9u3) ...
Setting up libwebp6:armhf (0.5.2-1) ...
Setting up fontconfig-config (2.11.0-6.7) ...
Setting up libnginx-mod-stream (1.10.3-1+deb9u3) ...
Setting up libnginx-mod-http-echo (1.10.3-1+deb9u3) ...
Setting up libfontconfig1:armhf (2.11.0-6.7) ...
Setting up libgd3:armhf (2.2.4-2+deb9u5) ...
Setting up libnginx-mod-http-image-filter (1.10.3-1+deb9u3) ...
Setting up nginx-full (1.10.3-1+deb9u3) ...
Setting up nginx (1.10.3-1+deb9u3) ...
Processing triggers for libc-bin (2.24-11+deb9u4) ...
root@raspberrypi:/home/pi# rm -f /etc/nginx/sites-enabled/default
root@raspberrypi:/home/pi# apt-get install unipi-modbus-tools
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following additional packages will be installed:
busybox dkms raspberrypi-kernel-headers unipi-common unipi-kernel-modules-dkms
Suggested packages:
python3-apport menu
The following NEW packages will be installed:
busybox dkms raspberrypi-kernel-headers unipi-common unipi-kernel-modules-dkms unipi-modbus-tools
0 upgraded, 6 newly installed, 0 to remove and 0 not upgraded.
Need to get 17.2 MB of archives.
After this operation, 110 MB of additional disk space will be used.
Do you want to continue? [Y/n]
Get:1 http://archive.raspberrypi.org/debian stretch/main armhf raspberrypi-kernel-headers armhf 1.20190819~stretch-1 [16.7 MB]
Get:2 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian stretch/main armhf dkms all 2.3-2 [74.8 kB]
Get:3 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian stretch/main armhf busybox armhf 1:1.22.0-19 [374 kB]
Get:4 https://repo.unipi.technology/debian stretch/main armhf unipi-common armhf 1.2.8~stretch [16.8 kB]
Get:5 https://repo.unipi.technology/debian stretch/main armhf unipi-kernel-modules-dkms all 1.30 [51.9 kB]
Get:6 https://repo.unipi.technology/debian stretch/main armhf unipi-modbus-tools armhf 1.2.8~stretch [28.2 kB]
Fetched 17.2 MB in 49s (348 kB/s)
Selecting previously unselected package raspberrypi-kernel-headers.
(Reading database ... 35178 files and directories currently installed.)
Preparing to unpack .../raspberrypi-kernel-headers_1.20190819~stretch-1_armhf.deb ...
Unpacking raspberrypi-kernel-headers (1.20190819~stretch-1) ...
Selecting previously unselected package dkms.
Preparing to unpack .../archives/dkms_2.3-2_all.deb ...
Unpacking dkms (2.3-2) ...
Selecting previously unselected package busybox.
Preparing to unpack .../busybox_1%3a1.22.0-19_armhf.deb ...
Unpacking busybox (1:1.22.0-19) ...
Selecting previously unselected package unipi-common.
Preparing to unpack .../unipi-common_1.2.8~stretch_armhf.deb ...
Adding 'diversion of /boot/overlays/ds2482.dtbo to /usr/share/rpikernelhack/overlays/ds2482.dtbo by rpikernelhack'
Adding 'diversion of /boot/overlays/neuronee.dtbo to /usr/share/rpikernelhack/overlays/neuronee.dtbo by rpikernelhack'
Adding 'diversion of /boot/overlays/neuron-spi.dtbo to /usr/share/rpikernelhack/overlays/neuron-spi.dtbo by rpikernelhack'
Adding 'diversion of /boot/overlays/neuron-spi-new.dtbo to /usr/share/rpikernelhack/overlays/neuron-spi-new.dtbo by rpikernelhack'
Adding 'diversion of /boot/overlays/unipiee.dtbo to /usr/share/rpikernelhack/overlays/unipiee.dtbo by rpikernelhack'
Unpacking unipi-common (1.2.8~stretch) ...
Setting up raspberrypi-kernel-headers (1.20190819~stretch-1) ...
Selecting previously unselected package unipi-kernel-modules-dkms.
(Reading database ... 68866 files and directories currently installed.)
Preparing to unpack .../unipi-kernel-modules-dkms_1.30_all.deb ...
Unpacking unipi-kernel-modules-dkms (1.30) ...
Selecting previously unselected package unipi-modbus-tools.
Preparing to unpack .../unipi-modbus-tools_1.2.8~stretch_armhf.deb ...
Unpacking unipi-modbus-tools (1.2.8~stretch) ...
Setting up busybox (1:1.22.0-19) ...
Setting up dkms (2.3-2) ...
Processing triggers for man-db (2.7.6.1-2) ...
Setting up unipi-common (1.2.8~stretch) ...
Removing 'diversion of /boot/overlays/ds2482.dtbo to /usr/share/rpikernelhack/overlays/ds2482.dtbo by rpikernelhack'
Removing 'diversion of /boot/overlays/neuronee.dtbo to /usr/share/rpikernelhack/overlays/neuronee.dtbo by rpikernelhack'
Removing 'diversion of /boot/overlays/neuron-spi-new.dtbo to /usr/share/rpikernelhack/overlays/neuron-spi-new.dtbo by rpikernelhack'
Removing 'diversion of /boot/overlays/neuron-spi.dtbo to /usr/share/rpikernelhack/overlays/neuron-spi.dtbo by rpikernelhack'
Removing 'diversion of /boot/overlays/unipiee.dtbo to /usr/share/rpikernelhack/overlays/unipiee.dtbo by rpikernelhack'
Created symlink /etc/systemd/system/sysinit.target.wants/unipicheck.service → /lib/systemd/system/unipicheck.service.
Created symlink /etc/systemd/system/sysinit.target.wants/unipihostname.service → /lib/systemd/system/unipihostname.service.
Job for unipicheck.service failed because the control process exited with error code.
See "systemctl status unipicheck.service" and "journalctl -xe" for details.
unipicheck.service couldn't start.
run-parts: executing /etc/kernel/prerm.d/dkms 4.19.66+ /boot/kernel.img
run-parts: executing /etc/kernel/prerm.d/dkms 4.19.66-v7+ /boot/kernel7.img
run-parts: executing /etc/kernel/prerm.d/dkms 4.19.66-v7l+ /boot/kernel7l.img
run-parts: executing /etc/kernel/postinst.d/apt-auto-removal 4.19.66+ /boot/kernel.img
run-parts: executing /etc/kernel/postinst.d/dkms 4.19.66+ /boot/kernel.img
run-parts: executing /etc/kernel/postinst.d/initramfs-tools 4.19.66+ /boot/kernel.img
/etc/kernel/postinst.d/initramfs-tools:
update-initramfs: Generating /boot/initrd.img-4.19.66+
run-parts: executing /etc/kernel/postinst.d/initrd-config 4.19.66+ /boot/kernel.img
run-parts: executing /etc/kernel/postinst.d/apt-auto-removal 4.19.66-v7+ /boot/kernel7.img
run-parts: executing /etc/kernel/postinst.d/dkms 4.19.66-v7+ /boot/kernel7.img
run-parts: executing /etc/kernel/postinst.d/initramfs-tools 4.19.66-v7+ /boot/kernel7.img
/etc/kernel/postinst.d/initramfs-tools:
update-initramfs: Generating /boot/initrd.img-4.19.66-v7+
run-parts: executing /etc/kernel/postinst.d/initrd-config 4.19.66-v7+ /boot/kernel7.img
run-parts: executing /etc/kernel/postinst.d/apt-auto-removal 4.19.66-v7l+ /boot/kernel7l.img
run-parts: executing /etc/kernel/postinst.d/dkms 4.19.66-v7l+ /boot/kernel7l.img
run-parts: executing /etc/kernel/postinst.d/initramfs-tools 4.19.66-v7l+ /boot/kernel7l.img
/etc/kernel/postinst.d/initramfs-tools:
update-initramfs: Generating /boot/initrd.img-4.19.66-v7l+
WARNING: missing /lib/modules/4.19.66-v7l+
Ensure all necessary drivers are built into the linux image!
depmod: ERROR: could not open directory /lib/modules/4.19.66-v7l+: No such file or directory
depmod: FATAL: could not search modules: No such file or directory
depmod: WARNING: could not open /var/tmp/mkinitramfs_AwHrbP/lib/modules/4.19.66-v7l+/modules.order: No such file or directory
depmod: WARNING: could not open /var/tmp/mkinitramfs_AwHrbP/lib/modules/4.19.66-v7l+/modules.builtin: No such file or directory
run-parts: executing /etc/kernel/postinst.d/initrd-config 4.19.66-v7l+ /boot/kernel7l.img
Setting up unipi-kernel-modules-dkms (1.30) ...
Loading new unipi-1.30 DKMS files...
dpkg: warning: version 'initrd.inc-initrd.inc' has bad syntax: version number does not start with digit
dpkg: warning: version '4.19.66+
4.19.66-v7+' has bad syntax: invalid character in version number
dpkg: warning: version 'unipi.inc-unipi.inc' has bad syntax: version number does not start with digit
dpkg: warning: version 'initrd.inc-initrd.inc' has bad syntax: version number does not start with digit
It is likely that 4.19.66-v7+ belongs to a chroot's host
Building for 4.19.66+ and 4.19.66-v7+
Building initial module for 4.19.66+
Done.
unipi:
Running module version sanity check.
- Original module
- No original module exists within this kernel
- Installation
- Installing to /lib/modules/4.19.66+/extra/
rtc-unipi.ko:
Running module version sanity check.
- Original module
- No original module exists within this kernel
- Installation
- Installing to /lib/modules/4.19.66+/extra/
depmod....
Backing up initrd.img-4.19.66+ to /boot/initrd.img-4.19.66+.old-dkms
Making new initrd.img-4.19.66+
(If next boot fails, revert to initrd.img-4.19.66+.old-dkms image)
update-initramfs...(bad exit status: 1)
-------- Uninstall Beginning --------
Module: unipi
Version: 1.30
Kernel: 4.19.66+ (armv7l)
-------------------------------------
Status: Before uninstall, this module version was ACTIVE on this kernel.
unipi.ko:
- Uninstallation
- Deleting from: /lib/modules/4.19.66+/extra/
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.
rtc-unipi.ko:
- Uninstallation
- Deleting from: /lib/modules/4.19.66+/extra/
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.
depmod...
Backing up initrd.img-4.19.66+ to /boot/initrd.img-4.19.66+.old-dkms
Making new initrd.img-4.19.66+
(If next boot fails, revert to initrd.img-4.19.66+.old-dkms image)
update-initramfs...(bad exit status: 1)
Warning: There was a problem remaking your initrd. You must manually remake it
before booting into this kernel.
DKMS: uninstall completed.
Error! Problems with mkinitrd detected. Automatically uninstalling this module.
DKMS: Install Failed (mkinitrd problems). Module rolled back to built state.
dpkg: error processing package unipi-kernel-modules-dkms (--configure):
subprocess installed post-installation script returned error exit status 7
dpkg: dependency problems prevent configuration of unipi-modbus-tools:
unipi-modbus-tools depends on unipi-kernel-modules-dkms | unipi-kernel-modules | neuron-kernel (>= 1.13.20180719) | axon-kernel (>= 1.13.20180719); however:
Package unipi-kernel-modules-dkms is not configured yet.
Package unipi-kernel-modules is not installed.
Package neuron-kernel is not installed.
Package axon-kernel is not installed.
dpkg: error processing package unipi-modbus-tools (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
unipi-kernel-modules-dkms
unipi-modbus-tools
E: Sub-process /usr/bin/dpkg returned an error code (1)
root@raspberrypi:/home/pi# vi /etc/kernel/post
postinst.d/ postrm.d/
root@raspberrypi:/home/pi# vi /etc/kernel/post
postinst.d/ postrm.d/
root@raspberrypi:/home/pi# vi /etc/kernel/post
postinst.d/ postrm.d/
root@raspberrypi:/home/pi# vi /etc/kernel/postinst.d/
apt-auto-removal dkms initramfs-tools initrd-config
root@raspberrypi:/home/pi# vi /etc/kernel/postinst.d/
apt-auto-removal dkms initramfs-tools initrd-config
root@raspberrypi:/home/pi# vi /etc/kernel/postinst.d/initrd-config
root@raspberrypi:/home/pi# history
1 passwd pi
2 echo "deb https://repo.unipi.technology/debian stretch main" >> /etc/apt/sources.list.d/unipi.list
3 wget https://repo.unipi.technology/debian/unipi_pub.gpg -O - | apt-key add
4 apt-get update
5 ls
6 apt-get upgrade
7 apt-get install nginx
8 rm -f /etc/nginx/sites-enabled/default
9 apt-get install unipi-modbus-tools
10 vi /etc/kernel/postinst.d/initrd-config
11 history
root@raspberrypi:/home/pi# apt-get install evok
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following additional packages will be installed:
libavahi-client3 libow-3.1-5 libpython2.7 owfs-common python-ow
The following NEW packages will be installed:
evok libavahi-client3 libow-3.1-5 libpython2.7 owfs-common python-ow
0 upgraded, 6 newly installed, 0 to remove and 0 not upgraded.
2 not fully installed or removed.
Need to get 7,258 kB of archives.
After this operation, 30.3 MB of additional disk space will be used.
Do you want to continue? [Y/n]
Get:1 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian stretch/main armhf libavahi-client3 armhf 0.6.32-2 [51.3 kB]
Get:2 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian stretch/main armhf owfs-common all 3.1p5-1 [16.2 kB]
Get:3 https://repo.unipi.technology/debian stretch/main armhf evok armhf 2.1.4~stretch [5,979 kB]
Get:4 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian stretch/main armhf libow-3.1-5 armhf 3.1p5-1 [265 kB]
Get:5 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian stretch/main armhf libpython2.7 armhf 2.7.13-2+deb9u3 [914 kB]
Get:6 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian stretch/main armhf python-ow armhf 3.1p5-1 [32.2 kB]
Fetched 7,258 kB in 20s (346 kB/s)
Selecting previously unselected package libavahi-client3:armhf.
(Reading database ... 68894 files and directories currently installed.)
Preparing to unpack .../libavahi-client3_0.6.32-2_armhf.deb ...
Unpacking libavahi-client3:armhf (0.6.32-2) ...
Selecting previously unselected package owfs-common.
Preparing to unpack .../owfs-common_3.1p5-1_all.deb ...
Unpacking owfs-common (3.1p5-1) ...
Selecting previously unselected package libow-3.1-5:armhf.
Preparing to unpack .../libow-3.1-5_3.1p5-1_armhf.deb ...
Unpacking libow-3.1-5:armhf (3.1p5-1) ...
Selecting previously unselected package libpython2.7:armhf.
Preparing to unpack .../libpython2.7_2.7.13-2+deb9u3_armhf.deb ...
Unpacking libpython2.7:armhf (2.7.13-2+deb9u3) ...
Selecting previously unselected package python-ow.
Preparing to unpack .../python-ow_3.1p5-1_armhf.deb ...
Unpacking python-ow (3.1p5-1) ...
Setting up libavahi-client3:armhf (0.6.32-2) ...
Setting up owfs-common (3.1p5-1) ...
Creating config file /etc/owfs.conf with new version
Setting up libow-3.1-5:armhf (3.1p5-1) ...
Setting up libpython2.7:armhf (2.7.13-2+deb9u3) ...
Setting up python-ow (3.1p5-1) ...
Selecting previously unselected package evok.
(Reading database ... 68956 files and directories currently installed.)
Preparing to unpack .../evok_2.1.4~stretch_armhf.deb ...
Unpacking evok (2.1.4~stretch) ...
Setting up unipi-kernel-modules-dkms (1.30) ...
Removing old unipi-1.30 DKMS files...
-------- Uninstall Beginning --------
Module: unipi
Version: 1.30
Kernel: 4.19.66+ (armv7l)
-------------------------------------
Status: This module version was INACTIVE for this kernel.
depmod...
DKMS: uninstall completed.
------------------------------
Deleting module version: 1.30
completely from the DKMS tree.
------------------------------
Done.
Loading new unipi-1.30 DKMS files...
dpkg: warning: version 'initrd.inc-initrd.inc' has bad syntax: version number does not start with digit
dpkg: warning: version '4.19.66+
4.19.66-v7+' has bad syntax: invalid character in version number
dpkg: warning: version 'unipi.inc-unipi.inc' has bad syntax: version number does not start with digit
dpkg: warning: version 'initrd.inc-initrd.inc' has bad syntax: version number does not start with digit
It is likely that 4.19.66-v7+ belongs to a chroot's host
Building for 4.19.66+ and 4.19.66-v7+
Building initial module for 4.19.66+
Done.
unipi:
Running module version sanity check.
- Original module
- No original module exists within this kernel
- Installation
- Installing to /lib/modules/4.19.66+/extra/
rtc-unipi.ko:
Running module version sanity check.
- Original module
- No original module exists within this kernel
- Installation
- Installing to /lib/modules/4.19.66+/extra/
depmod...
Backing up initrd.img-4.19.66+ to /boot/initrd.img-4.19.66+.old-dkms
Making new initrd.img-4.19.66+
(If next boot fails, revert to initrd.img-4.19.66+.old-dkms image)
update-initramfs...(bad exit status: 1)
-------- Uninstall Beginning --------
Module: unipi
Version: 1.30
Kernel: 4.19.66+ (armv7l)
-------------------------------------
Status: Before uninstall, this module version was ACTIVE on this kernel.
unipi.ko:
- Uninstallation
- Deleting from: /lib/modules/4.19.66+/extra/
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.
rtc-unipi.ko:
- Uninstallation
- Deleting from: /lib/modules/4.19.66+/extra/
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.
depmod...
Backing up initrd.img-4.19.66+ to /boot/initrd.img-4.19.66+.old-dkms
Making new initrd.img-4.19.66+
(If next boot fails, revert to initrd.img-4.19.66+.old-dkms image)
update-initramfs...(bad exit status: 1)
Warning: There was a problem remaking your initrd. You must manually remake it
before booting into this kernel.
DKMS: uninstall completed.
Error! Problems with mkinitrd detected. Automatically uninstalling this module.
DKMS: Install Failed (mkinitrd problems). Module rolled back to built state.
dpkg: error processing package unipi-kernel-modules-dkms (--configure):
subprocess installed post-installation script returned error exit status 7
Processing triggers for libc-bin (2.24-11+deb9u4) ...
dpkg: dependency problems prevent configuration of unipi-modbus-tools:
unipi-modbus-tools depends on unipi-kernel-modules-dkms | unipi-kernel-modules | neuron-kernel (>= 1.13.20180719) | axon-kernel (>= 1.13.20180719); however:
Package unipi-kernel-modules-dkms is not configured yet.
Package unipi-kernel-modules is not installed.
Package neuron-kernel is not installed.
Package axon-kernel is not installed.
dpkg: error processing package unipi-modbus-tools (--configure):
dependency problems - leaving unconfigured
Processing triggers for man-db (2.7.6.1-2) ...
dpkg: dependency problems prevent configuration of evok:
evok depends on unipi-modbus-tools; however:
Package unipi-modbus-tools is not configured yet.
dpkg: error processing package evok (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
unipi-kernel-modules-dkms
unipi-modbus-tools
evok
E: Sub-process /usr/bin/dpkg returned an error code (1)
root@raspberrypi:/home/pi# systemctl enable evok
Created symlink /etc/systemd/system/multi-user.target.wants/evok.service → /lib/systemd/system/evok.service.
root@raspberrypi:/home/pi# systemctl start evok
root@raspberrypi:/home/pi# journalctl -xe
Sep 13 17:59:49 raspberrypi systemd[1]: Failed to start Check Unipi/Neuron/Axon version.
-- Subject: Unit unipicheck.service has failed
-- Defined-By: systemd
-- Support: https://www.debian.org/support
--
-- Unit unipicheck.service has failed.
--
-- The result is failed.
Sep 13 17:59:49 raspberrypi systemd[1]: unipicheck.service: Unit entered failed state.
Sep 13 17:59:49 raspberrypi systemd[1]: unipicheck.service: Failed with result 'exit-code'.
Sep 13 18:11:27 raspberrypi systemd[1]: Starting Cleanup of Temporary Directories...
-- Subject: Unit systemd-tmpfiles-clean.service has begun start-up
-- Defined-By: systemd
-- Support: https://www.debian.org/support
--
-- Unit systemd-tmpfiles-clean.service has begun starting up.
Sep 13 18:11:27 raspberrypi systemd[1]: Started Cleanup of Temporary Directories.
-- Subject: Unit systemd-tmpfiles-clean.service has finished start-up
-- Defined-By: systemd
-- Support: https://www.debian.org/support
--
-- Unit systemd-tmpfiles-clean.service has finished starting up.
--
-- The start-up result is done.
Sep 13 18:17:01 raspberrypi CRON[9649]: pam_unix(cron:session): session opened for user root by (uid=0)
Sep 13 18:17:01 raspberrypi CRON[9653]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Sep 13 18:17:01 raspberrypi CRON[9649]: pam_unix(cron:session): session closed for user root
Sep 13 18:25:31 raspberrypi systemd[1]: Reloading.
Sep 13 18:25:31 raspberrypi systemd[1]: apt-daily.timer: Adding 3h 31min 14.563985s random time.
Sep 13 18:25:31 raspberrypi systemd[1]: apt-daily-upgrade.timer: Adding 29min 30.130751s random time.
Sep 13 18:25:37 raspberrypi systemd[1]: Starting EVOK ModBus/WebSocket/RPC Server...
-- Subject: Unit evok.service has begun start-up
-- Defined-By: systemd
-- Support: https://www.debian.org/support
--
-- Unit evok.service has begun starting up.
Sep 13 18:25:37 raspberrypi systemd[1]: Started EVOK ModBus/WebSocket/RPC Server.
-- Subject: Unit evok.service has finished start-up
-- Defined-By: systemd
-- Support: https://www.debian.org/support
--
-- Unit evok.service has finished starting up.
--
-- The start-up result is done.
root@raspberrypi:/home/pi# reboot
login as: pi
[email protected]'s password:
Linux L203-sn226 4.19.66-v7+ #1253 SMP Thu Aug 15 11:49:46 BST 2019 armv7l
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Fri Sep 13 17:56:05 2019 from 192.168.13.23
pi@L203-sn226:~ $ sudo su
root@L203-sn226:/home/pi# systemctl start evok
root@L203-sn226:/home/pi# systemctl status evok
● evok.service - EVOK ModBus/WebSocket/RPC Server
Loaded: loaded (/lib/systemd/system/evok.service; enabled; vendor preset: enabled)
Active: active (running) since Fri 2019-09-13 18:26:16 BST; 57s ago
Process: 583 ExecStartPre=/bin/ln -sf /etc/nginx/sites-enabled/evok /etc/evok-nginx.conf (code=exited, status=0/SUCCESS
Process: 576 ExecStartPre=/bin/rm -f /etc/nginx/sites-enabled/mervis (code=exited, status=0/SUCCESS)
Process: 570 ExecStartPre=/bin/mv -f /etc/nginx/sites-enabled/mervis /etc/nginx/sites-available/ (code=exited, status=1
Process: 564 ExecStartPre=/bin/cp -f /etc/nginx/sites-available/evok /etc/nginx/sites-enabled/ (code=exited, status=1/F
Main PID: 588 (python)
Tasks: 1 (limit: 4915)
CGroup: /system.slice/evok.service
└─588 /opt/evok/bin/python /opt/evok/lib/python2.7/site-packages/evok/evok.py
Sep 13 18:26:16 L203-sn226 systemd[1]: Starting EVOK ModBus/WebSocket/RPC Server...
Sep 13 18:26:16 L203-sn226 systemd[1]: Started EVOK ModBus/WebSocket/RPC Server.
...skipping...
● evok.service - EVOK ModBus/WebSocket/RPC Server
Loaded: loaded (/lib/systemd/system/evok.service; enabled; vendor preset: enabled)
Active: active (running) since Fri 2019-09-13 18:26:16 BST; 57s ago
Process: 583 ExecStartPre=/bin/ln -sf /etc/nginx/sites-enabled/evok /etc/evok-nginx.conf (code=exited, status=0/SUCCESS
Process: 576 ExecStartPre=/bin/rm -f /etc/nginx/sites-enabled/mervis (code=exited, status=0/SUCCESS)
Process: 570 ExecStartPre=/bin/mv -f /etc/nginx/sites-enabled/mervis /etc/nginx/sites-available/ (code=exited, status=1
Process: 564 ExecStartPre=/bin/cp -f /etc/nginx/sites-available/evok /etc/nginx/sites-enabled/ (code=exited, status=1/F
Main PID: 588 (python)
Tasks: 1 (limit: 4915)
CGroup: /system.slice/evok.service
└─588 /opt/evok/bin/python /opt/evok/lib/python2.7/site-packages/evok/evok.py
Sep 13 18:26:16 L203-sn226 systemd[1]: Starting EVOK ModBus/WebSocket/RPC Server...
Sep 13 18:26:16 L203-sn226 systemd[1]: Started EVOK ModBus/WebSocket/RPC Server.
~
~
~
~
~
~
root@L203-sn226:/home/pi# netstat -tuplen
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 14927 754/sshd
tcp 0 0 0.0.0.0:8080 0.0.0.0:* LISTEN 0 12791 588/python
tcp6 0 0 :::22 :::* LISTEN 0 14929 754/sshd
tcp6 0 0 :::8080 :::* LISTEN 0 12792 588/python
udp 0 0 0.0.0.0:68 0.0.0.0:* 0 13502 739/dhcpcd
udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 10691 565/avahi-daemon: r
udp 0 0 0.0.0.0:53241 0.0.0.0:* 108 10693 565/avahi-daemon: r
udp6 0 0 :::546 :::* 0 13520 739/dhcpcd
udp6 0 0 :::5353 :::* 108 10692 565/avahi-daemon: r
udp6 0 0 :::49513 :::* 108 10694 565/avahi-daemon: r
root@L203-sn226:/home/pi# ls /etc/nginx/sites-enabled/
root@L203-sn226:/home/pi# systemctl status evok
● evok.service - EVOK ModBus/WebSocket/RPC Server
Loaded: loaded (/lib/systemd/system/evok.service; enabled; vendor preset: enabled)
Active: active (running) since Fri 2019-09-13 18:26:16 BST; 2min 25s ago
Process: 583 ExecStartPre=/bin/ln -sf /etc/nginx/sites-enabled/evok /etc/evok-nginx.conf (code=exited, status=0/SUCCESS
Process: 576 ExecStartPre=/bin/rm -f /etc/nginx/sites-enabled/mervis (code=exited, status=0/SUCCESS)
Process: 570 ExecStartPre=/bin/mv -f /etc/nginx/sites-enabled/mervis /etc/nginx/sites-available/ (code=exited, status=1
Process: 564 ExecStartPre=/bin/cp -f /etc/nginx/sites-available/evok /etc/nginx/sites-enabled/ (code=exited, status=1/F
Main PID: 588 (python)
Tasks: 1 (limit: 4915)
CGroup: /system.slice/evok.service
└─588 /opt/evok/bin/python /opt/evok/lib/python2.7/site-packages/evok/evok.py
Sep 13 18:26:16 L203-sn226 systemd[1]: Starting EVOK ModBus/WebSocket/RPC Server...
Sep 13 18:26:16 L203-sn226 systemd[1]: Started EVOK ModBus/WebSocket/RPC Server.
root@L203-sn226:/home/pi# ls /etc/nginx/sites-available/
default evok.dpkg-new
root@L203-sn226:/home/pi# ls -la /etc/nginx/sites-enabled/
total 8
drwxr-xr-x 2 root root 4096 Sep 13 17:58 .
drwxr-xr-x 8 root root 4096 Sep 13 17:57 ..
root@L203-sn226:/home/pi# cat /etc/evok-nginx.conf
cat: /etc/evok-nginx.conf: No such file or directory
Last day i destroyed my running UniPian-Neuron-OS-2019-01-07-v1.9 with an apt update and apt upgrade.
The evok service didn't start again after issuing this commands.
Now i try to reinstall from clean raspbian stretch lite image and there seems to be the same issue (manual from github)
What is wrong here? How to make a clean setup?
And how to keep the all time running network device up to date???
Now i will go for the old UniPian Image and not execute the apt upgrade command :(
And here are the outputs from the setup commands:
login as: pi
[email protected]'s password:
Linux raspberrypi 4.14.98-v7+ #1200 SMP Tue Feb 12 20:27:48 GMT 2019 armv7l
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
SSH is enabled and the default password for the 'pi' user has not been changed.
This is a security risk - please login as the 'pi' user and type 'passwd' to set a new password.
pi@raspberrypi:~ $ sudo su
root@raspberrypi:/home/pi# passwd pi
Enter new UNIX password:
Retype new UNIX password:
passwd: password updated successfully
root@raspberrypi:/home/pi# exit
pi@raspberrypi:~ $ sudo reboot
login as: pi
[email protected]'s password:
Linux raspberrypi 4.14.98-v7+ #1200 SMP Tue Feb 12 20:27:48 GMT 2019 armv7l
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Fri Sep 13 17:43:57 2019 from 192.168.13.23
pi@raspberrypi:~ $ sudo apt update
Get:1 http://archive.raspberrypi.org/debian stretch InRelease [25.4 kB]
Get:2 http://raspbian.raspberrypi.org/raspbian stretch InRelease [15.0 kB]
Get:3 http://raspbian.raspberrypi.org/raspbian stretch/main armhf Packages [11.7 MB]
Get:4 http://archive.raspberrypi.org/debian stretch/main armhf Packages [221 kB]
Get:5 http://archive.raspberrypi.org/debian stretch/ui armhf Packages [45.0 kB]
Get:6 http://raspbian.raspberrypi.org/raspbian stretch/contrib armhf Packages [56.9 kB]
Get:7 http://raspbian.raspberrypi.org/raspbian stretch/non-free armhf Packages [95.5 kB]
Fetched 12.1 MB in 41s (290 kB/s)
Reading package lists... Done
Building dependency tree
Reading state information... Done
43 packages can be upgraded. Run 'apt list --upgradable' to see them.
pi@raspberrypi:~ $ sudo apt upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
The following packages will be upgraded:
base-files dbus gettext-base libdbus-1-3 libexpat1 libglib2.0-0 libglib2.0-data libicu57 libnghttp2-14 libpam-systemd
libpng-dev libpng-tools libpng16-16 libraspberrypi-bin libraspberrypi-dev libraspberrypi-doc libraspberrypi0
libssh2-1 libssl1.0.2 libssl1.1 libsystemd0 libudev1 libwbclient0 openssh-client openssh-server openssh-sftp-server
openssl patch raspberrypi-bootloader raspberrypi-kernel raspi-config rsync samba-common ssh systemd systemd-sysv
tzdata udev unzip usbutils vim-common vim-tiny xxd
43 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 95.8 MB of archives.
After this operation, 7,886 kB of additional disk space will be used.
Do you want to continue? [Y/n]
Get:1 http://archive.raspberrypi.org/debian stretch/main armhf libraspberrypi-doc armhf 1.20190819~stretch-1 [31.4 MB]
Get:2 http://mirror.de.leaseweb.net/raspbian/raspbian stretch/main armhf base-files armhf 9.9+rpi1+deb9u11 [67.7 kB]
Get:3 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian stretch/main armhf dbus armhf 1.10.28-0+deb9u1 [192 kB]
Get:4 http://ftp.agdsn.de/pub/mirrors/raspbian/raspbian stretch/main armhf libdbus-1-3 armhf 1.10.28-0+deb9u1 [176 kB]
Get:7 http://ftp.agdsn.de/pub/mirrors/raspbian/raspbian stretch/main armhf libpam-systemd armhf 232-25+deb9u12 [175 kB]
Get:5 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian stretch/main armhf libexpat1 armhf 2.2.0-2+deb9u2 [62.3 kB]
Get:6 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian stretch/main armhf systemd-sysv armhf 232-25+deb9u12 [82.5 kB]
Get:9 http://ftp.agdsn.de/pub/mirrors/raspbian/raspbian stretch/main armhf systemd armhf 232-25+deb9u12 [2,222 kB]
Get:8 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian stretch/main armhf libsystemd0 armhf 232-25+deb9u12 [259 kB]
Get:10 http://mirror.de.leaseweb.net/raspbian/raspbian stretch/main armhf udev armhf 232-25+deb9u12 [1,072 kB]
Get:11 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian stretch/main armhf libudev1 armhf 232-25+deb9u12 [121 kB]
Get:17 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian stretch/main armhf openssh-client armhf 1:7.4p1-10+deb9u7 [701 kB]
Get:26 http://mirror.chaoticum.net/rpi/raspbian stretch/main armhf libglib2.0-0 armhf 2.50.3-2+deb9u1 [2,527 kB]
Get:12 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian stretch/main armhf libwbclient0 armhf 2:4.5.16+dfsg-1+deb9u1 [121 kB]
Get:19 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian stretch/main armhf tzdata all 2019b-0+deb9u1 [275 kB]
Get:14 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian stretch/main armhf openssh-sftp-server armhf 1:7.4p1-10+deb9u7 [32.9 kB]
Get:16 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian stretch/main armhf openssh-server armhf 1:7.4p1-10+deb9u7 [301 kB]
Get:18 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian stretch/main armhf ssh all 1:7.4p1-10+deb9u7 [189 kB]
Get:30 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian stretch/main armhf libpng-tools armhf 1.6.28-1+deb9u1 [130 kB]
Get:13 http://ftp.agdsn.de/pub/mirrors/raspbian/raspbian stretch/main armhf samba-common all 2:4.5.16+dfsg-1+deb9u1 [174 kB]
Get:15 http://ftp.agdsn.de/pub/mirrors/raspbian/raspbian stretch/main armhf libssl1.0.2 armhf 1.0.2s-1~deb9u1 [899 kB]
Get:31 http://mirror.de.leaseweb.net/raspbian/raspbian stretch/main armhf libpng-dev armhf 1.6.28-1+deb9u1 [232 kB]
Get:20 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian stretch/main armhf libssl1.1 armhf 1.1.0k-1~deb9u1 [1,117 kB]
Get:34 http://mirror.de.leaseweb.net/raspbian/raspbian stretch/main armhf openssl armhf 1.1.0k-1~deb9u1 [712 kB]
Get:23 http://ftp.agdsn.de/pub/mirrors/raspbian/raspbian stretch/main armhf vim-common all 2:8.0.0197-4+deb9u3 [159 kB]
Get:29 http://ftp.agdsn.de/pub/mirrors/raspbian/raspbian stretch/main armhf libnghttp2-14 armhf 1.18.1-1+deb9u1 [68.1 kB]
Get:32 http://ftp.agdsn.de/pub/mirrors/raspbian/raspbian stretch/main armhf libpng16-16 armhf 1.6.28-1+deb9u1 [263 kB]
Get:21 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian stretch/main armhf vim-tiny armhf 2:8.0.0197-4+deb9u3 [338 kB]
Get:36 http://mirror.de.leaseweb.net/raspbian/raspbian stretch/main armhf unzip armhf 6.0-21+deb9u2 [151 kB]
Get:22 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian stretch/main armhf xxd armhf 2:8.0.0197-4+deb9u3 [132 kB]
Get:24 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian stretch/main armhf gettext-base armhf 0.19.8.1-2+deb9u1 [117 kB]
Get:25 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian stretch/main armhf patch armhf 2.7.5-1+deb9u2 [99.6 kB]
Get:27 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian stretch/main armhf libglib2.0-data all 2.50.3-2+deb9u1 [2,518 kB]
Get:28 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian stretch/main armhf libicu57 armhf 57.1-6+deb9u3 [7,425 kB]
Get:33 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian stretch/main armhf libssh2-1 armhf 1.7.0-1+deb9u1 [126 kB]
Get:35 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian stretch/main armhf rsync armhf 3.1.2-1+deb9u2 [356 kB]
Get:37 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian stretch/main armhf usbutils armhf 1:007-4+deb9u1 [226 kB]
Get:38 http://archive.raspberrypi.org/debian stretch/main armhf libraspberrypi-dev armhf 1.20190819~stretch-1 [407 kB]
Get:39 http://archive.raspberrypi.org/debian stretch/main armhf raspberrypi-kernel armhf 1.20190819~stretch-1 [35.4 MB]
Get:40 http://archive.raspberrypi.org/debian stretch/main armhf libraspberrypi-bin armhf 1.20190819~stretch-1 [338 kB]
Get:41 http://archive.raspberrypi.org/debian stretch/main armhf libraspberrypi0 armhf 1.20190819~stretch-1 [843 kB]
Get:42 http://archive.raspberrypi.org/debian stretch/main armhf raspberrypi-bootloader armhf 1.20190819~stretch-1 [3,581 kB]
Get:43 http://archive.raspberrypi.org/debian stretch/ui armhf raspi-config all 20190423 [20.4 kB]
Fetched 95.8 MB in 4min 36s (347 kB/s)
Reading changelogs... Done
Extracting templates from packages: 100%
Preconfiguring packages ...
(Reading database ... 34734 files and directories currently installed.)
Preparing to unpack .../base-files_9.9+rpi1+deb9u11_armhf.deb ...
Unpacking base-files (9.9+rpi1+deb9u11) over (9.9+rpi1+deb9u8) ...
Setting up base-files (9.9+rpi1+deb9u11) ...
Installing new version of config file /etc/debian_version ...
(Reading database ... 34734 files and directories currently installed.)
Preparing to unpack .../0-dbus_1.10.28-0+deb9u1_armhf.deb ...
Unpacking dbus (1.10.28-0+deb9u1) over (1.10.26-0+deb9u1) ...
Preparing to unpack .../1-libdbus-1-3_1.10.28-0+deb9u1_armhf.deb ...
Unpacking libdbus-1-3:armhf (1.10.28-0+deb9u1) over (1.10.26-0+deb9u1) ...
Preparing to unpack .../2-libexpat1_2.2.0-2+deb9u2_armhf.deb ...
Unpacking libexpat1:armhf (2.2.0-2+deb9u2) over (2.2.0-2+deb9u1) ...
Preparing to unpack .../3-systemd-sysv_232-25+deb9u12_armhf.deb ...
Unpacking systemd-sysv (232-25+deb9u12) over (232-25+deb9u9) ...
Preparing to unpack .../4-libpam-systemd_232-25+deb9u12_armhf.deb ...
Unpacking libpam-systemd:armhf (232-25+deb9u12) over (232-25+deb9u9) ...
Preparing to unpack .../5-libsystemd0_232-25+deb9u12_armhf.deb ...
Unpacking libsystemd0:armhf (232-25+deb9u12) over (232-25+deb9u9) ...
Setting up libsystemd0:armhf (232-25+deb9u12) ...
(Reading database ... 34734 files and directories currently installed.)
Preparing to unpack .../systemd_232-25+deb9u12_armhf.deb ...
Unpacking systemd (232-25+deb9u12) over (232-25+deb9u9) ...
Preparing to unpack .../udev_232-25+deb9u12_armhf.deb ...
Unpacking udev (232-25+deb9u12) over (232-25+deb9u9) ...
Preparing to unpack .../libudev1_232-25+deb9u12_armhf.deb ...
Unpacking libudev1:armhf (232-25+deb9u12) over (232-25+deb9u9) ...
Setting up libudev1:armhf (232-25+deb9u12) ...
(Reading database ... 34734 files and directories currently installed.)
Preparing to unpack .../00-libwbclient0_2%3a4.5.16+dfsg-1+deb9u1_armhf.deb ...
Unpacking libwbclient0:armhf (2:4.5.16+dfsg-1+deb9u1) over (2:4.5.16+dfsg-1) ...
Preparing to unpack .../01-samba-common_2%3a4.5.16+dfsg-1+deb9u1_all.deb ...
Unpacking samba-common (2:4.5.16+dfsg-1+deb9u1) over (2:4.5.16+dfsg-1) ...
Preparing to unpack .../02-openssh-sftp-server_1%3a7.4p1-10+deb9u7_armhf.deb ...
Unpacking openssh-sftp-server (1:7.4p1-10+deb9u7) over (1:7.4p1-10+deb9u6) ...
Preparing to unpack .../03-libssl1.0.2_1.0.2s-1~deb9u1_armhf.deb ...
Unpacking libssl1.0.2:armhf (1.0.2s-1~deb9u1) over (1.0.2r-1~deb9u1) ...
Preparing to unpack .../04-openssh-server_1%3a7.4p1-10+deb9u7_armhf.deb ...
Unpacking openssh-server (1:7.4p1-10+deb9u7) over (1:7.4p1-10+deb9u6) ...
Preparing to unpack .../05-openssh-client_1%3a7.4p1-10+deb9u7_armhf.deb ...
Unpacking openssh-client (1:7.4p1-10+deb9u7) over (1:7.4p1-10+deb9u6) ...
Preparing to unpack .../06-ssh_1%3a7.4p1-10+deb9u7_all.deb ...
Unpacking ssh (1:7.4p1-10+deb9u7) over (1:7.4p1-10+deb9u6) ...
Preparing to unpack .../07-tzdata_2019b-0+deb9u1_all.deb ...
Unpacking tzdata (2019b-0+deb9u1) over (2019a-0+deb9u1) ...
Preparing to unpack .../08-libssl1.1_1.1.0k-1~deb9u1_armhf.deb ...
Unpacking libssl1.1:armhf (1.1.0k-1~deb9u1) over (1.1.0j-1~deb9u1) ...
Preparing to unpack .../09-vim-tiny_2%3a8.0.0197-4+deb9u3_armhf.deb ...
Unpacking vim-tiny (2:8.0.0197-4+deb9u3) over (2:8.0.0197-4+deb9u1) ...
Preparing to unpack .../10-xxd_2%3a8.0.0197-4+deb9u3_armhf.deb ...
Unpacking xxd (2:8.0.0197-4+deb9u3) over (2:8.0.0197-4+deb9u1) ...
Preparing to unpack .../11-vim-common_2%3a8.0.0197-4+deb9u3_all.deb ...
Unpacking vim-common (2:8.0.0197-4+deb9u3) over (2:8.0.0197-4+deb9u1) ...
Preparing to unpack .../12-gettext-base_0.19.8.1-2+deb9u1_armhf.deb ...
Unpacking gettext-base (0.19.8.1-2+deb9u1) over (0.19.8.1-2) ...
Preparing to unpack .../13-patch_2.7.5-1+deb9u2_armhf.deb ...
Unpacking patch (2.7.5-1+deb9u2) over (2.7.5-1+deb9u1) ...
Preparing to unpack .../14-libglib2.0-0_2.50.3-2+deb9u1_armhf.deb ...
Unpacking libglib2.0-0:armhf (2.50.3-2+deb9u1) over (2.50.3-2) ...
Preparing to unpack .../15-libglib2.0-data_2.50.3-2+deb9u1_all.deb ...
Unpacking libglib2.0-data (2.50.3-2+deb9u1) over (2.50.3-2) ...
Preparing to unpack .../16-libicu57_57.1-6+deb9u3_armhf.deb ...
Unpacking libicu57:armhf (57.1-6+deb9u3) over (57.1-6+deb9u2) ...
Preparing to unpack .../17-libnghttp2-14_1.18.1-1+deb9u1_armhf.deb ...
Unpacking libnghttp2-14:armhf (1.18.1-1+deb9u1) over (1.18.1-1) ...
Preparing to unpack .../18-libpng-tools_1.6.28-1+deb9u1_armhf.deb ...
Unpacking libpng-tools (1.6.28-1+deb9u1) over (1.6.28-1) ...
Preparing to unpack .../19-libpng-dev_1.6.28-1+deb9u1_armhf.deb ...
Unpacking libpng-dev:armhf (1.6.28-1+deb9u1) over (1.6.28-1) ...
Preparing to unpack .../20-libpng16-16_1.6.28-1+deb9u1_armhf.deb ...
Unpacking libpng16-16:armhf (1.6.28-1+deb9u1) over (1.6.28-1) ...
Preparing to unpack .../21-libraspberrypi-doc_1.20190819~stretch-1_armhf.deb ...
Unpacking libraspberrypi-doc (1.20190819~stretch-1) over (1.20190401-1) ...
Preparing to unpack .../22-libraspberrypi-dev_1.20190819~stretch-1_armhf.deb ...
Unpacking libraspberrypi-dev (1.20190819~stretch-1) over (1.20190401-1) ...
Preparing to unpack .../23-raspberrypi-kernel_1.20190819~stretch-1_armhf.deb ...
Adding 'diversion of /boot/{........} to /usr/share/rpikernelhack/{....} by rpikernelhack'
Unpacking raspberrypi-kernel (1.20190819~stretch-1) over (1.20190401-1) ...
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 4.14.98+ /boot/kernel.img
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 4.14.98-v7+ /boot/kernel7.img
Preparing to unpack .../24-libraspberrypi-bin_1.20190819~stretch-1_armhf.deb ...
Unpacking libraspberrypi-bin (1.20190819~stretch-1) over (1.20190401-1) ...
Preparing to unpack .../25-libraspberrypi0_1.20190819~stretch-1_armhf.deb ...
Unpacking libraspberrypi0 (1.20190819~stretch-1) over (1.20190401-1) ...
Preparing to unpack .../26-raspberrypi-bootloader_1.20190819~stretch-1_armhf.deb ...
Adding 'diversion of /boot/{........} to /usr/share/rpikernelhack/{....} by rpikernelhack'
Unpacking raspberrypi-bootloader (1.20190819~stretch-1) over (1.20190401-1) ...
Preparing to unpack .../27-libssh2-1_1.7.0-1+deb9u1_armhf.deb ...
Unpacking libssh2-1:armhf (1.7.0-1+deb9u1) over (1.7.0-1) ...
Preparing to unpack .../28-openssl_1.1.0k-1~deb9u1_armhf.deb ...
Unpacking openssl (1.1.0k-1~deb9u1) over (1.1.0j-1~deb9u1) ...
Preparing to unpack .../29-rsync_3.1.2-1+deb9u2_armhf.deb ...
Unpacking rsync (3.1.2-1+deb9u2) over (3.1.2-1+deb9u1) ...
Preparing to unpack .../30-unzip_6.0-21+deb9u2_armhf.deb ...
Unpacking unzip (6.0-21+deb9u2) over (6.0-21) ...
Preparing to unpack .../31-usbutils_1%3a007-4+deb9u1_armhf.deb ...
Unpacking usbutils (1:007-4+deb9u1) over (1:007-4) ...
Preparing to unpack .../32-raspi-config_20190423_all.deb ...
Unpacking raspi-config (20190423) over (20190219) ...
Setting up libwbclient0:armhf (2:4.5.16+dfsg-1+deb9u1) ...
Setting up libexpat1:armhf (2.2.0-2+deb9u2) ...
Setting up libnghttp2-14:armhf (1.18.1-1+deb9u1) ...
Processing triggers for mime-support (3.60) ...
Setting up xxd (2:8.0.0197-4+deb9u3) ...
Setting up libpng16-16:armhf (1.6.28-1+deb9u1) ...
Processing triggers for install-info (6.3.0.dfsg.1-1+b1) ...
Setting up libpng-tools (1.6.28-1+deb9u1) ...
Setting up tzdata (2019b-0+deb9u1) ...
Current default time zone: 'Europe/London'
Local time is now: Fri Sep 13 17:54:45 BST 2019.
Universal Time is now: Fri Sep 13 16:54:45 UTC 2019.
Run 'dpkg-reconfigure tzdata' if you wish to change it.
Setting up libglib2.0-0:armhf (2.50.3-2+deb9u1) ...
No schema files found: doing nothing.
Setting up unzip (6.0-21+deb9u2) ...
Setting up raspberrypi-bootloader (1.20190819~stretch-1) ...
Removing 'diversion of /boot/{........} to /usr/share/rpikernelhack/{....} by rpikernelhack'
Setting up samba-common (2:4.5.16+dfsg-1+deb9u1) ...
Setting up gettext-base (0.19.8.1-2+deb9u1) ...
Setting up usbutils (1:007-4+deb9u1) ...
Setting up libicu57:armhf (57.1-6+deb9u3) ...
Setting up rsync (3.1.2-1+deb9u2) ...
Setting up raspi-config (20190423) ...
Setting up libssl1.0.2:armhf (1.0.2s-1~deb9u1) ...
Setting up libssh2-1:armhf (1.7.0-1+deb9u1) ...
Setting up patch (2.7.5-1+deb9u2) ...
Setting up libglib2.0-data (2.50.3-2+deb9u1) ...
Processing triggers for libc-bin (2.24-11+deb9u4) ...
Setting up udev (232-25+deb9u12) ...
addgroup: The group `input' already exists as a system group. Exiting.
update-initramfs: deferring update (trigger activated)
Setting up libssl1.1:armhf (1.1.0k-1~deb9u1) ...
Setting up raspberrypi-kernel (1.20190819~stretch-1) ...
Removing 'diversion of /boot/{........} to /usr/share/rpikernelhack/{....} by rpikernelhack'
run-parts: executing /etc/kernel/postinst.d/apt-auto-removal 4.19.66+ /boot/kernel.img
run-parts: executing /etc/kernel/postinst.d/initramfs-tools 4.19.66+ /boot/kernel.img
run-parts: executing /etc/kernel/postinst.d/apt-auto-removal 4.19.66-v7+ /boot/kernel7.img
run-parts: executing /etc/kernel/postinst.d/initramfs-tools 4.19.66-v7+ /boot/kernel7.img
run-parts: executing /etc/kernel/postinst.d/apt-auto-removal 4.19.66-v7l+ /boot/kernel7l.img
run-parts: executing /etc/kernel/postinst.d/initramfs-tools 4.19.66-v7l+ /boot/kernel7l.img
Setting up systemd (232-25+deb9u12) ...
addgroup: The group `systemd-journal' already exists as a system group. Exiting.
Setting up openssl (1.1.0k-1~deb9u1) ...
Setting up vim-common (2:8.0.0197-4+deb9u3) ...
Processing triggers for man-db (2.7.6.1-2) ...
Setting up libpng-dev:armhf (1.6.28-1+deb9u1) ...
Setting up openssh-client (1:7.4p1-10+deb9u7) ...
Setting up libdbus-1-3:armhf (1.10.28-0+deb9u1) ...
Setting up vim-tiny (2:8.0.0197-4+deb9u3) ...
Setting up libraspberrypi0 (1.20190819~stretch-1) ...
Setting up libraspberrypi-doc (1.20190819~stretch-1) ...
Setting up systemd-sysv (232-25+deb9u12) ...
Setting up libraspberrypi-dev (1.20190819~stretch-1) ...
Setting up openssh-sftp-server (1:7.4p1-10+deb9u7) ...
Setting up dbus (1.10.28-0+deb9u1) ...
A reboot is required to replace the running dbus-daemon.
Please reboot the system when convenient.
Setting up libraspberrypi-bin (1.20190819~stretch-1) ...
Setting up libpam-systemd:armhf (232-25+deb9u12) ...
Setting up openssh-server (1:7.4p1-10+deb9u7) ...
Setting up ssh (1:7.4p1-10+deb9u7) ...
Processing triggers for initramfs-tools (0.130) ...
Processing triggers for libc-bin (2.24-11+deb9u4) ...
pi@raspberrypi:~ $ reboot
Failed to set wall message, ignoring: Interactive authentication required.
Failed to reboot system via logind: Interactive authentication required.
Failed to open /dev/initctl: Permission denied
Failed to talk to init daemon.
pi@raspberrypi:~ $ sudo reboot
login as: pi
[email protected]'s password:
Linux raspberrypi 4.19.66-v7+ #1253 SMP Thu Aug 15 11:49:46 BST 2019 armv7l
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Fri Sep 13 17:47:37 2019 from 192.168.13.23
pi@raspberrypi:~ $ cu
curl cut
pi@raspberrypi:~ $ cu
curl cut
pi@raspberrypi:~ $ sudo su
root@raspberrypi:/home/pi# echo "deb https://repo.unipi.technology/debian stretch main" >> /etc/apt/sources.list.d/unipi.list
root@raspberrypi:/home/pi# wget https://repo.unipi.technology/debian/unipi_pub.gpg -O - | apt-key add
--2019-09-13 17:56:34-- https://repo.unipi.technology/debian/unipi_pub.gpg
Resolving repo.unipi.technology (repo.unipi.technology)... 86.49.170.141
Connecting to repo.unipi.technology (repo.unipi.technology)|86.49.170.141|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1822 (1.8K)
Saving to: ‘STDOUT’
- 100%[=================================================>] 1.78K --.-KB/s in 0.001s
2019-09-13 17:56:35 (3.25 MB/s) - written to stdout [1822/1822]
OK
root@raspberrypi:/home/pi# apt-get update
Hit:1 http://raspbian.raspberrypi.org/raspbian stretch InRelease
Hit:2 http://archive.raspberrypi.org/debian stretch InRelease
Get:3 https://repo.unipi.technology/debian stretch InRelease [17.7 kB]
Get:4 https://repo.unipi.technology/debian stretch/main armhf Packages [24.1 kB]
Get:5 https://repo.unipi.technology/debian stretch/main all Packages [7,070 B]
Fetched 48.9 kB in 1s (31.1 kB/s)
Reading package lists... Done
root@raspberrypi:/home/pi# ls
root@raspberrypi:/home/pi# apt-get upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
root@raspberrypi:/home/pi# apt-get install nginx
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following additional packages will be installed:
fontconfig-config fonts-dejavu-core libfontconfig1 libgd3 libjbig0 libnginx-mod-http-auth-pam
libnginx-mod-http-dav-ext libnginx-mod-http-echo libnginx-mod-http-geoip libnginx-mod-http-image-filter
libnginx-mod-http-subs-filter libnginx-mod-http-upstream-fair libnginx-mod-http-xslt-filter libnginx-mod-mail
libnginx-mod-stream libtiff5 libwebp6 libxpm4 libxslt1.1 nginx-common nginx-full
Suggested packages:
libgd-tools fcgiwrap nginx-doc ssl-cert
The following NEW packages will be installed:
fontconfig-config fonts-dejavu-core libfontconfig1 libgd3 libjbig0 libnginx-mod-http-auth-pam
libnginx-mod-http-dav-ext libnginx-mod-http-echo libnginx-mod-http-geoip libnginx-mod-http-image-filter
libnginx-mod-http-subs-filter libnginx-mod-http-upstream-fair libnginx-mod-http-xslt-filter libnginx-mod-mail
libnginx-mod-stream libtiff5 libwebp6 libxpm4 libxslt1.1 nginx nginx-common nginx-full
0 upgraded, 22 newly installed, 0 to remove and 0 not upgraded.
Need to get 3,980 kB of archives.
After this operation, 8,422 kB of additional disk space will be used.
Do you want to continue? [Y/n]
Get:1 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian stretch/main armhf libjbig0 armhf 2.1-3.1 [27.5 kB]
Get:2 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian stretch/main armhf fonts-dejavu-core all 2.37-1 [1,068 kB]
Get:5 http://mirror.de.leaseweb.net/raspbian/raspbian stretch/main armhf libtiff5 armhf 4.0.8-2+deb9u4 [220 kB]
Get:6 http://ftp.agdsn.de/pub/mirrors/raspbian/raspbian stretch/main armhf libwebp6 armhf 0.5.2-1 [202 kB]
Get:9 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian stretch/main armhf nginx-common all 1.10.3-1+deb9u3 [105 kB]
Get:8 http://mirror.de.leaseweb.net/raspbian/raspbian stretch/main armhf libgd3 armhf 2.2.4-2+deb9u5 [114 kB]
Get:13 http://ftp.agdsn.de/pub/mirrors/raspbian/raspbian stretch/main armhf libnginx-mod-http-geoip armhf 1.10.3-1+deb9u3 [86.8 kB]
Get:14 http://ftp.agdsn.de/pub/mirrors/raspbian/raspbian stretch/main armhf libnginx-mod-http-image-filter armhf 1.10.3-1+deb9u3 [89.6 kB]
Get:3 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian stretch/main armhf fontconfig-config all 2.11.0-6.7 [271 kB]
Get:4 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian stretch/main armhf libfontconfig1 armhf 2.11.0-6.7 [313 kB]
Get:21 http://mirror.netcologne.de/raspbian/raspbian stretch/main armhf nginx-full armhf 1.10.3-1+deb9u3 [390 kB]
Get:7 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian stretch/main armhf libxpm4 armhf 1:3.5.12-1 [43.6 kB]
Get:10 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian stretch/main armhf libnginx-mod-http-auth-pam armhf 1.10.3-1+deb9u3 [85.7 kB]
Get:11 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian stretch/main armhf libnginx-mod-http-dav-ext armhf 1.10.3-1+deb9u3 [87.4 kB]
Get:12 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian stretch/main armhf libnginx-mod-http-echo armhf 1.10.3-1+deb9u3 [95.4 kB]
Get:15 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian stretch/main armhf libnginx-mod-http-subs-filter armhf 1.10.3-1+deb9u3 [88.8 kB]
Get:16 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian stretch/main armhf libnginx-mod-http-upstream-fair armhf 1.10.3-1+deb9u3 [88.9 kB]
Get:17 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian stretch/main armhf libxslt1.1 armhf 1.1.29-2.1+deb9u1 [215 kB]
Get:18 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian stretch/main armhf libnginx-mod-http-xslt-filter armhf 1.10.3-1+deb9u3 [88.4 kB]
Get:19 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian stretch/main armhf libnginx-mod-mail armhf 1.10.3-1+deb9u3 [113 kB]
Get:20 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian stretch/main armhf libnginx-mod-stream armhf 1.10.3-1+deb9u3 [106 kB]
Get:22 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian stretch/main armhf nginx all 1.10.3-1+deb9u3 [81.8 kB]
Fetched 3,980 kB in 12s (316 kB/s)
Hello,
The evok webssocket only sends the changing values(temperature) from the DS18B20 sensors.
If a long time a sensor value not changes, no value is send for this duration.
Is it possible to send for example every 5 minutes the old unchanged value?
Thanks
One DS18B20 is faulty. To discover this one sensor was not easy.
Therefore, I have each data line of the sensors (heating) individually connected to the bus and then tested the 1-wire bus. (if the heating sensor data wires are disconnected, the other 2 sensors are transmitting values)
At no time did I disconnect GND and + 5V to a sensor.
Unfortunately the simple connection of the sensor data ware was not sufficient, because EVOK did not deliver any new values.
Only a restart of the module could detect a functioning sensor / 1-wire bus within one minute.
Without restart, the value comes in felt 5-10 minutes, if the bus works well ...
6 sensor wires in one clamp, the faulty was there.
The sensor wires are drilled together and then put in the WAGO clamp.
1-wire sensors are lost after some time of usage.
for example the recorded data (via node-red to influxdb):
i tried to reboot via ssh (M203 Module), this doesn't help (after the last points near 07:45).
There is no issue in the file systems with the used MicroSD card (SanDisk Extreme Pro)
the evok webinterface shows N/A for the defined sensors in the evok.cfg
For cabling i use a 2x2x0,8 EIB cable. Cable length are different to the sensors (in a range of 5-15 meters)
later i'll take pictures of the wiring points to ensure all things are ok.
( I think there is some issue in the 1-wire port or evok )
Is it planned to integrate a setting function in evok for such type of sensor? (and others)
Thanks
The load average for neuron os defaults above 1.1
Is it normal for usage with evok? Or is there some issue?
kernel:
pi@M203-snXXX:~ $ uname -a
Linux M203-snXXX 4.14.79-v7+ #1159 SMP Sun Nov 4 17:50:20 GMT 2018 armv7l GNU/Linux
top output:
top - 06:59:48 up 1 day, 1:48, 1 user, load average: 1.14, 1.11, 1.15
Tasks: 107 total, 1 running, 64 sleeping, 0 stopped, 0 zombie
%Cpu(s): 3.0 us, 0.7 sy, 0.1 ni, 96.2 id, 0.0 wa, 0.0 hi, 0.1 si, 0.0 st
KiB Mem : 994100 total, 532744 free, 162256 used, 299100 buff/cache
KiB Swap: 102396 total, 102396 free, 0 used. 771924 avail Mem
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
794 root 20 0 39696 21572 9036 S 12.5 2.2 190:45.45 python
3127 pi 20 0 8240 3288 2724 R 1.3 0.3 0:00.27 top
721 pi 25 5 175880 72760 25084 S 0.7 7.3 5:19.30 node-red
912 root 20 0 2348 428 364 S 0.7 0.0 12:18.77 unipi_tcp_serve
390 root 20 0 0 0 0 D 0.3 0.0 1:23.63 unipispi_inv
2741 pi 20 0 11520 3832 3112 S 0.3 0.4 0:00.33 sshd
1 root 20 0 28244 6160 4836 S 0.0 0.6 0:06.12 systemd
htop:
1 [|||||||| 14.5%] Tasks: 34, 50 thr; 1 running
2 [ 0.0%] Load average: 1.16 1.14 1.15
3 [|| 2.0%] Uptime: 1 day, 01:52:37
4 [| 0.7%]
Mem[|||||||||||||||||||||||| 166M/971M]
Swp[ 0K/100.0M]
PID USER PRI NI VIRT RES SHR S CPU% MEM% TIME+ Command
794 root 20 0 39696 21572 9036 S 11.8 2.2 3h11:19 /opt/evok/bin/python /opt/evok/lib/python2.7/site-pa
3200 pi 20 0 6236 3780 2456 R 2.0 0.4 0:03.02 htop
912 root 20 0 2348 428 364 S 0.7 0.0 12:20.94 /opt/unipi-bin/unipi_tcp_server -p 502 -a 255
721 pi 25 5 171M 72872 25084 S 0.7 7.3 5:20.54 node-red
1104 influxdb 20 0 953M 47168 9368 S 0.7 4.7 17:24.57 /usr/bin/influxd -config /etc/influxdb/influxdb.conf
1138 www-data 20 0 47232 2668 1408 S 0.0 0.3 0:08.42 nginx: worker process
Hello,
is there a way to change the configuration registers with the EVOK API for DS18B20 sensor?
thanks
In which way I can set the precision for the sensors?
With 10 sensors in the 1wire no new values are transmitted, I think there is some kind of hick up/problem in the 1wire bus. the EVOK web interface and in node red no new values are displayed/transmitted.
Is there a way to optimize the 1wire bus?
10 sensors will need 10* 750ms (12bit precision) to transmit the data, in total 7,5 seconds for all sensors.
In a evok config file there is set an interval of 3 seconds for the i2c bus. Is this value OK? Is this causing my problems in the bus?
Or should a new interval set through device definition in the evok.conf under /etc?
Thanks