Mervis and Dali Protocol

c.man

Hi,
have Mervis a DALI library to use within serie S or M Neuron ?

Martin Kudláček

Hello @c-man,
the Neuron doesn't have DALI interface, so there is nothing to control. We have Axon S605 with 4 DALI interfaces and we have the functionality for Mervis.

Best regards,
Martin

John-paul

Hello @martin-kudláček, I have a Neuron M203, we were also struggeling with dimming function for a dali light controller. Now that it's clear i cannot use dali on a M203 is there maybe another possibility to control light with the 1-10v analog output? We need to control a room light with a dimming function. I hope you can maybe help me. many regards John-paul

Martin Kudláček

Hello @john-paul,
there are dimmers available on the market, which accept 0-10V. You can just wire it up directly to the AO.

Best regards,
Martin

Peli

@Martin-Kudláček which Unipi devices have a DALI interface? Thank you.

John-paul

@Martin-Kudláček I now use the Lunatone 0-10V dali controler 886468352-HS (30ma). This is working very fine on the 1-10V analog output on my M203's. We now have two units running in the field. I now can control the dali system with my hmi screen. Again thnx for the support. Best regards, John-paul