Well done! I am thinking about using Unipi and HA as well.

I was wondering whether you could share with us some details. What unit do you use? Which image did you install? Do you think that it would be possible to run HA on a Unipi device or NUC is a better option?

I would like to have just one device for my home automation project.

I have been searching for more information about Unipi and HA integration. I have found these repositories so far

• https://github.com/matthijsberg/unipi-mqtt
• https://github.com/StevenBrs/evok2mqtt
• https://github.com/mhemeryck/evok2mqtt

I find this https://community.home-assistant.io/t/modbus-tcp-integration/64395 topic useful as well.

Would you recommend a combination of Unipi and HA? Did you try to integrate some zigbee devices?

Thank you, Martin.

@Martin-Kudláček which Unipi devices have a DALI interface? Thank you.

@tomas_hora, thank you.

I have been reading more about your products and I found out that EVOK provides websockets. I was thinking that I would write a script which would process MQTT messages from a dongle and deliver them to Mervis using websocket and the other way around. Would that work? It would replace the Node-red which you suggested.

Thank you for your help, Martin.

Well done! I am thinking about using Unipi and HA as well.

I was wondering whether you could share with us some details. What unit do you use? Which image did you install? Do you think that it would be possible to run HA on a Unipi device or NUC is a better option?

I would like to have just one device for my home automation project.

I have been searching for more information about Unipi and HA integration. I have found these repositories so far

• https://github.com/matthijsberg/unipi-mqtt
• https://github.com/StevenBrs/evok2mqtt
• https://github.com/mhemeryck/evok2mqtt

I find this https://community.home-assistant.io/t/modbus-tcp-integration/64395 topic useful as well.

Would you recommend a combination of Unipi and HA? Did you try to integrate some zigbee devices?

Thank you, Martin.

Hi @tomas_hora,

Thank you for your answer. I understand that I would need a usb dongle, I found a list of supported devices at zigbee2mqtt.io. Would that be a good list to choose from?

Could you please elaborate on using Node-red or a different application a bit more? Would I be able to use Mervis OS along with node-red? Would they run on the same device (e.g. Axon) or I would need two devices?

Thank you, Martin.

Hi @tomas_hora,

I wonder whether there is any update on this topic. I am interested in integrating a Patron unit with some ZigBee devices, let's say Phillips Hue and Ikea bulbs. Could you share with us some details on how your customers use ZigBee with Mervis?

Thank you, Martin.