• Register
    • Login
    • Search
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Groups
    • Search

    S103-G use GSM/GPRS module to connect to internet

    Neuron Series
    6
    29
    22286
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • roberts_lando
      roberts_lando @unix last edited by

      @unix you welcome! :)

      1 Reply Last reply Reply Quote 0
      • Vesa Kauppinen
        Vesa Kauppinen @roberts_lando last edited by

        @roberts_lando said in S103-G use GSM/GPRS module to connect to internet:

        Hi!

        Great tutorial!

        I use Raspbian Stretch Lite and I can not get the S103-G to work with these instructions. The command cu -l / dev / ttyAMA0 crashes when I try to AT command. Ifconfig does not give ppp0.

        What have I missed?

        Vesa

        U 1 Reply Last reply Reply Quote 0
        • U
          unix @Vesa Kauppinen last edited by

          @Vesa-Kauppinen
          Hi
          have you disable the BT on Pi3

          /boot/config.txt addline

          dtoverlay=pi3-disable-bt

          and on /boot/cmdline.txt remove

          serial console than its looks like

          dwc_otg.lpm_enable=0 console=tty1 root=PARTUUID=e13fdf55-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait

          Regards

          Vesa Kauppinen 1 Reply Last reply Reply Quote 0
          • Vesa Kauppinen
            Vesa Kauppinen @unix last edited by

            @unix

            Thank you for answer!

            BT disabled and cmdline.txt edited...

            No success

            @tomas_hora any ideas?

            Vesa

            1 Reply Last reply Reply Quote 0
            • roberts_lando
              roberts_lando last edited by

              I always had compatibility problems when using Raspbian Stretch, try to use last Raspbian Jessie img and it should work

              Vesa Kauppinen 1 Reply Last reply Reply Quote 0
              • Vesa Kauppinen
                Vesa Kauppinen @roberts_lando last edited by Vesa Kauppinen

                @roberts_lando

                Thank you for answer!

                Now i have tried with Rasbian Jessie Lite.....no success :disappointed:

                Do you use Jessie Lite or full?

                Thanks,
                Vesa

                roberts_lando 1 Reply Last reply Reply Quote 0
                • roberts_lando
                  roberts_lando @Vesa Kauppinen last edited by

                  @Vesa-Kauppinen I think you have missed one or more step of the turorial. I suggest you to retry the tutorial and check if an instruction fails. Do you have switch on the GPRS module?

                  1 Reply Last reply Reply Quote 0
                  • M
                    mattia98 @roberts_lando last edited by mattia98

                    @roberts_lando Hi, I've done all the steps to configure the internet connection but when I type "ifconfig" it doesn't show me the ppp0 interface. Could you please help me?

                    when I type the command "cat /var/log/syslog" It show me this messages:

                    Sep 4 13:41:52 raspberrypi pppd[1698]: pppd 2.4.7 started by root, uid 0
                    Sep 4 13:41:52 raspberrypi chat[1702]: abort on (BUSY)
                    Sep 4 13:41:52 raspberrypi chat[1702]: abort on (VOICE)
                    Sep 4 13:41:52 raspberrypi chat[1702]: abort on (NO CARRIER)
                    Sep 4 13:41:52 raspberrypi chat[1702]: abort on (NO DIALTONE)
                    Sep 4 13:41:52 raspberrypi chat[1702]: abort on (NO DIAL TONE)
                    Sep 4 13:41:52 raspberrypi chat[1702]: abort on (NO ANSWER)
                    Sep 4 13:41:52 raspberrypi chat[1702]: abort on (DELAYED)
                    Sep 4 13:41:52 raspberrypi chat[1702]: abort on (ERROR)
                    Sep 4 13:41:52 raspberrypi chat[1702]: abort on (+CGATT: 0)
                    Sep 4 13:41:52 raspberrypi chat[1702]: send (AT^M)
                    Sep 4 13:41:52 raspberrypi chat[1702]: timeout set to 12 seconds
                    Sep 4 13:41:52 raspberrypi chat[1702]: expect (OK)
                    Sep 4 13:42:04 raspberrypi chat[1702]: alarm
                    Sep 4 13:42:04 raspberrypi chat[1702]: Failed
                    Sep 4 13:42:04 raspberrypi pppd[1698]: Connect script failed
                    Sep 4 13:42:10 raspberrypi OWFS[477]: DEFAULT: ow_reconnect.c:(72) DS2482-100 bus master reconnected
                    Sep 4 13:42:30 raspberrypi OWFS[477]: DEFAULT: ow_reconnect.c:(72) DS2482-100 bus master reconnected

                    1 Reply Last reply Reply Quote 0
                    • T
                      tomas_hora administrators last edited by

                      The issue was by the incorrect comm speed with the modem. I modified the guide provided by @roberts_lando to use the proper baudrate of 9600 instead of 115200.

                      1 Reply Last reply Reply Quote 0
                      • First post
                        Last post