Digital input 13-14
Joakim Tallinger last edited by
The wiki link does not work anymore (http://unipi.technology/wiki/Inputs_13,14). Can you share the details here?
RasPi3 GPIO 20/21 to P5 header. Which pin is one and is any other wire needed? power/gnd?
I have followed the instructions. (made cabling and adjusted the evok configuration so that inputs 13 and 14 become available on the web interface). When input 13 of 14 is operated, nothing at all happens. Do I have to do anything else outside of the cabling and adjust evok config?
@Poelie Check configuration of JP2-JP5 since this should be all except the motioned wiring and configuration.