Setup sleep ratio
-
Hi,
I have simple program for switch on or switch off rele via DI. All working fine but there is wery slow reaction from UniPi. But if I change setting for PLC it don't work after change. I use Mervis 2.0.5 - 45059
Thank You for helping
Lukas

-
Basically that is the limit of how fast Mervis scans the DIs. In order to set the sleep ratio to lower, you need than switch back to the profile LAN or proxy.
-
@tomas_hora Thank you and how can I do it?
-
@SorakCz The image that was posted here was OK! You just needed to switch back to your LAN/proxy profile.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login