• Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Groups
    • Search
    • Register
    • Login

    Mervis is slow

    Scheduled Pinned Locked Moved Mervis
    mervisi2cslow
    3 Posts 2 Posters 3.2k Views 1 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • F
      FransSleddens
      last edited by

      Re: Mervis reacting Slow

      I have installed the mervis runtine on the Raspberri Pi. I used version 2.05 of the IDE and the runtime. This Raspberri is mounted on an UNIPI board and 2 extra relay-boards connected via the I2C bus.
      The plc is running at 16.6 ms. the I2C enpoint is updated with 565 ms. It is almost the same as the one-wire temperature meter, 661 ms.
      I tried different I2C speeds, There was no change in reaction time.
      Is this End point speed normal? or must i use another runtime version?

      I included pictures of the runtime status and the configuration.
      All tips are welcome :)

      4_1479939849905_Unipi_Relays.PNG 3_1479939849905_Mervis Status.PNG 2_1479939849905_Mervis Status I2C settings.PNG 1_1479939849905_Emo-R8 board 2.PNG 0_1479939849905_Emo-R8 board 1.PNG

      1 Reply Last reply
      Reply Quote 0
      • T
        tomas_hora administrators
        last edited by

        Hello, how many I2C and 1Wire devices is in your application? The 1Wire is implemented using also the I2C bus so it is shared for both 1Wire and relays... However I tried 1 temp sensor and 1 emo-r8 with max 24ms at I2C and 46 at 1Wire.

        F 1 Reply Last reply
        Reply Quote 0
        • F
          FransSleddens @tomas_hora
          last edited by

          @tomas_hora,

          I have one 1-wire temp -meter and 2 external I2C relay-cards (emorelay-boven and emorelay-beneden).
          These relay-cards and the unipi card are supplied by separate adapters, so the grounds are not coupled.
          Can this have influence on the speed?

          if in the program 2 relays are switched at the same time (each relay on a separate relay card), i can see that they are switched one after the other. at least 0.5 sec after each other.

          I would be nice if all relays could be switched in 100ms.

          I use the older mervis runtime (version 2.5) on a Rasberry Pi B+, is the last runtime faster or is there no difference is speeds.

          Kind regards,

          Frans.

          1 Reply Last reply
          Reply Quote 0

          Hello! It looks like you're interested in this conversation, but you don't have an account yet.

          Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

          With your input, this post could be even better 💗

          Register Login
          • First post
            Last post