4RO 4DI expansion module
-
Hello
I've recently bought two expansion modules from unipi. And would like to know how to communicate with both the modules using a one wire system. In my project i have the rasberry pi connected to the unipi and would like to add this two expansion module, this are 1w 4 DI 4RO expansion modules
-
Do you plan to use evok or what sw to read/set the IOs?
-
Hi
Am currently using Rex Controls.
-
Hello, sorry I should have get it from the topic category.
I think @jaroslav_sobota should be able to help you with that.
-
Hi
Out of curosity if am communicating with these two expansion boards do I have to have my I2C enabled on my unipi
-
When am using the owdir command am not able to detect the 2 expansion modules that I've connected on the unipi using the 1 wire system
-
Did you edit the /etc/owfs.conf file? It should contain the following:
!server: server = 127.0.0.1:4304 allow_other server: port = 127.0.0.1:4304 server: i2c=ALL:ALL timeout_volatile = 2You will need to restart owserver for these settings to have effect. Or reboot the Raspberry Pi.
Can you post here the output of the owdir command? Please start with only 1 expansion module.
Jaroslav
-
Hi my project is fully functional thanks to you all
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login