Patron M207 - SPI channels empty
-
-
@cleve
Hello Krystof,
yes, run1 and run2 are blinking (1 sec on, 1 sec off and so on). -
@bertf Then it seems like a software issue, I would recommend you switching to the latest OS.
-
@cleve
Sorry for my very late respons. As suggested I did a complete reinstall of the most recent Unipi Patron OS - Debian 12, but also a reinstall of the earlier Debian 10. I tried several times but both OS-versions didn't reconnect the device to the DI/DO/RO's. Same message in the kernel log each time: "spi channel looks empty". Can it be a hardware problem? -
Hello @bertf,
this looks like a hardware problem, do you remember which firmware version did you have before? -
Hi @cleve
I'm not sure. I use the images from the Unipi-website and the standard repo's that come with them. I have local backups from 'patron-base-os_12.20240701.0' and 'patron-node-red_12.20240701.0'. I will have used one of these images to initially migrate from Debian 10 to 12. The reinstall as mentioned above is done with image 'patron-node-red_12.20240917.1'.
Kind regards,
Bert -
@bertf could you please write your SN? If you do not feel comfortable writing this in public space, you can write to [email protected].
-
@cleve
No problem. The serial number is 725.
Kind regards,
Bert -
Hello @bertf,
coul you please fill the repair order form and send us the unit? -
@cleve
The repair form is completed and the unit is on it's way to you.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login