• Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Groups
    • Search
    • Register
    • Login

    Patron M207 - SPI channels empty

    Scheduled Pinned Locked Moved Patron series
    11 Posts 2 Posters 3.2k Views 1 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • B
      bertf
      last edited by

      Hi,
      All the DI/DO's on my M207 have stopped working. I cannot connect to them anymore using the Evok or modbus API. The problem seems to have occurred after updating from evok/bookworm 3.0.5.1~bookworm to evok/bookworm 3.0.6.1~bookworm, but downgrading evok doesn't solve the problem.

      The kernel log shows that the device isn't able to connect to spi2.0 en spi2.1:
      Sep 28 13:02:19 unipi kernel: unipi-id unipi-id: Found PLC M207 (family Patron)
      Sep 28 13:02:19 unipi kernel: imx-sdma 302c0000.dma-controller: firmware found.
      Sep 28 13:02:19 unipi kernel: imx-sdma 302c0000.dma-controller: loaded firmware 4.5
      Sep 28 13:02:19 unipi kernel: imx-sdma 302b0000.dma-controller: firmware found.
      Sep 28 13:02:19 unipi kernel: w1_master_driver w1_bus_master1: Attaching one wire slave 28.3c94e38178aa crc 4e
      Sep 28 13:02:19 unipi kernel: imx-sdma 30bd0000.dma-controller: firmware found.
      Sep 28 13:02:19 unipi kernel: spi_master spi2: will run message pump with realtime priority
      Sep 28 13:02:19 unipi kernel: unipi-spi spi2.1: spi channel looks empty
      Sep 28 13:02:19 unipi kernel: unipi-spi spi2.0: spi channel looks empty

      Sep 28 13:02:19 unipi kernel: unipi-spi: Driver registered. Major Version: 2.52:2024:04:26
      Sep 28 13:02:19 unipi kernel: w1_master_driver w1_bus_master1: Attaching one wire slave 28.3cffb55644a1 crc 47
      Sep 28 13:02:20 unipi kernel: w1_master_driver w1_bus_master1: Attaching one wire slave 28.3cbbe381d791 crc de
      Sep 28 13:02:20 unipi kernel: w1_master_driver w1_bus_master1: Attaching one wire slave 28.3cbae381c1a3 crc 79
      Sep 28 13:02:20 unipi kernel: w1_master_driver w1_bus_master1: Attaching one wire slave 28.3c41e3815f93 crc 3b
      Sep 28 13:02:20 M207-sn725 kernel: w1_master_driver w1_bus_master1: Attaching one wire slave 28.3c4ee3814c1b crc 5a
      Sep 28 13:02:22 M207-sn725 kernel: fec 30be0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
      Sep 28 13:02:22 M207-sn725 kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

      Any ideas what is the problem? Thanks in advance!

      Best regards,
      Bert

      C 1 Reply Last reply
      Reply Quote 0
      • C
        cleve administrators @bertf
        last edited by

        @bertf
        Hello,
        do the run LEDs blink or not?

        Best regards,
        Kryštof Černý - Unipi engineer

        B 1 Reply Last reply
        Reply Quote 0
        • B
          bertf @cleve
          last edited by

          @cleve
          Hello Krystof,
          yes, run1 and run2 are blinking (1 sec on, 1 sec off and so on).

          C 1 Reply Last reply
          Reply Quote 0
          • C
            cleve administrators @bertf
            last edited by

            @bertf Then it seems like a software issue, I would recommend you switching to the latest OS.

            Best regards,
            Kryštof Černý - Unipi engineer

            B 1 Reply Last reply
            Reply Quote 0
            • B
              bertf @cleve
              last edited by

              @cleve
              Sorry for my very late respons. As suggested I did a complete reinstall of the most recent Unipi Patron OS - Debian 12, but also a reinstall of the earlier Debian 10. I tried several times but both OS-versions didn't reconnect the device to the DI/DO/RO's. Same message in the kernel log each time: "spi channel looks empty". Can it be a hardware problem?

              C 1 Reply Last reply
              Reply Quote 0
              • C
                cleve administrators @bertf
                last edited by

                Hello @bertf,
                this looks like a hardware problem, do you remember which firmware version did you have before?

                Best regards,
                Kryštof Černý - Unipi engineer

                B 1 Reply Last reply
                Reply Quote 0
                • B
                  bertf @cleve
                  last edited by

                  Hi @cleve
                  I'm not sure. I use the images from the Unipi-website and the standard repo's that come with them. I have local backups from 'patron-base-os_12.20240701.0' and 'patron-node-red_12.20240701.0'. I will have used one of these images to initially migrate from Debian 10 to 12. The reinstall as mentioned above is done with image 'patron-node-red_12.20240917.1'.
                  Kind regards,
                  Bert

                  C 1 Reply Last reply
                  Reply Quote 0
                  • C
                    cleve administrators @bertf
                    last edited by

                    @bertf could you please write your SN? If you do not feel comfortable writing this in public space, you can write to [email protected].

                    Best regards,
                    Kryštof Černý - Unipi engineer

                    B 1 Reply Last reply
                    Reply Quote 0
                    • B
                      bertf @cleve
                      last edited by bertf

                      @cleve
                      No problem. The serial number is 725.
                      Kind regards,
                      Bert

                      C 1 Reply Last reply
                      Reply Quote 0
                      • C
                        cleve administrators @bertf
                        last edited by

                        Hello @bertf,
                        coul you please fill the repair order form and send us the unit?

                        Best regards,
                        Kryštof Černý - Unipi engineer

                        B 1 Reply Last reply
                        Reply Quote 0
                        • B
                          bertf @cleve
                          last edited by

                          @cleve
                          The repair form is completed and the unit is on it's way to you.

                          1 Reply Last reply
                          Reply Quote 0

                          Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                          Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                          With your input, this post could be even better 💗

                          Register Login
                          • First post
                            Last post