EVOK shows no I/O - Neuron L513
I bought an unused Neuron L513 (Serial-Number: 1) and I want now to test the EVOK control panel. I started with a fresh Pi OS "Buster" and installed the EVOK like it shown in the documentation. But when I start the web frontend the control panel shows only the "Analog Input 1.01" - no further entries on in- or output. Them same at system.
EVOK service ist running. What did I wrong?
Can you enable debug logging in the /etc/evok.conf and check the /var/log/evok.log file after restarting the service? Even though you're on a totally different platform, this looks like a similar problem as what I ran into yesterday as well: https://forum.unipi.technology/topic/1124/unipi-1-1-raspberry-pi-4-buster-evok-node-red
here ist my evok.log with debug=on. Evertything seems fine, but it still won't work. I only see Analog Input & Output from 1.01.
I also made a snapshot from my evok.conf
And as I saw it on your post made an output from dpkg -l | egrep "raspberrypi|evok|unipi|python"
Maybe @Martin-Kudláček could help me too?
sorry for the very late reply. Have you already solved the issue? If so, can you please share the solution?
Thank you so much!