Unipi 1.1 Node-RED OS doesn't start
-
I download and installed the "Unipi 1.1 Node-RED OS" image with Balena Etcher as described in the manual. But after I put the SD card in the Raspberry Pi the image will not starting up.
I get stuck on the boot screen.
Am I doing something wrong?It gets stuck on the following screen:

-
Hello @wolge,
I can confirm, that the Unipi 1.1 image cannot boot. We are looking into the issue. Once we will resolve it, I'll reply to you in this thread.Thanks for letting us know,
Martin -
Hello @Martin-Kudláček, I installed the image on the SD card with a program named "ApplePiBaker" and now it works! 😃
I don't know why it would work when I did the same proces with Balena Etcher.
I also tried to install the image on the SD card with Disk Utility on my Mac but this also didn't work.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login