I prefer to run node-red on my raspberry pi with desktop environment.

When I install "node-red-contrib-unipi-evok" and I insert a unipi flow the websocket node doesn't connect:

When I install the "Unipi 1.1 Node-RED OS" image on the SD card and start node-red the websocket works fine:

But in this option I have no desktop environment on my Raspberry Pi.

I'm trying to find out why the websocket doesn't work in the node-red installed in the first example with desktop environment.

I don't onderstand way this doesn't work. 😩
How can i fix this problem?
Can anyone help me with this?

I installed the image on the SD card with a program named "ApplePiBaker" and now it works!

Hello @Martin-Kudláček, I installed the image on the SD card with a program named "ApplePiBaker" and now it works! 😃

I don't know why it would work when I did the same proces with Balena Etcher.
I also tried to install the image on the SD card with Disk Utility on my Mac but this also didn't work.

I download and installed the "Unipi 1.1 Node-RED OS" image with Balena Etcher as described in the manual. But after I put the SD card in the Raspberry Pi the image will not starting up.

I get stuck on the boot screen.
Am I doing something wrong?

It gets stuck on the following screen:

@Martin-Kudláček I installed the "Unipi 1.1 Node-RED OS" image. But after I put the SD card in the Raspberry Pi the image will not starting right. I get the following screen:

Am I doing something wrong?

Hello @Martin-Kudláček , I use Debian Buster. I can change the config.txt by myself.
-Can you help me what to change?
-Or is it possible that you send my the config.txt with the right settings?

Hello everyone,

I wonder how the real time clock works with the Unipi 1.1?

Every time the raspberry has been off for 10 minutes, the clock is 10 minutes behind.

Can anyone help me?