Disable unipi modbus tcp service
-
Hi, I have disable evok and mervis from the axon web interface but the unipi tcp service is still up.
session-29.scope loaded active running Session 29 of user unipi unipicheck.service loaded active exited Check Unipi/Neuron/Axon version unipihostname.service loaded active exited Set default hostname on Neuron and Axon unipitcp.service loaded active running Unipi Neuron/Axon Modbus/Tcp Server user-1000.slice loaded active active User Slice of unipi unipispi.target loaded active active Neuron/Axon TargetI have disabled it using
sudo systemctl disable unipitcp.service, I think there should be a way to disable it using the web interface or disable it when disabling evok/mervisI also would like to know what is
unipispi.targetservice used for and alsounipicheck.serviceand If I can disable them If I'm not using mervis -
@roberts_lando The unipispi and unipicheck are common launchers of Neuron/Axons jobs (hostname generation, certain steps to setup some certain models, optional auto firmware upgrade, ... and running the unipitcp service). Check the /etc/systemd/system/unipispi.target.wants/
The unipitcp is a common interface and listens only on the local loopback so its not a security issue. If you do not use it, it it actually does not do anything
-
@tomas_hora it's not a security issue but as I'm using another plc runtime with a local modbus tcp master running on port 502
unipitcpservice was blocking it. I have disabled it and modbus has started working correctly
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login