node red istance to be interfaced to Mervis PLC
-
Hi all,
I have a stable Mervis environment with Neuron + several extension. I want use a dedicated node red instance on dedicated HW and finding a way to interface it with Mevis. There is way to read and write Mervis Global Varialbles trough Modus TCP/IP?
Thanks
Antonio -
Hi @arolli,
this is theoretically possible, but the easiest solution is to spin a ModbusTCP server in the Mervis and communicate over this protocol. The BACnet/IP would be easier to interface from the Node-RED, but we don't have any Node-RED nodes tested for this. The node-red-contrib-modbus works OK.Best regards,
Martin -
@Martin-Kudláček said in node red istance to be interfaced to Mervis PLC:
face from the Node-RED, but we don't have any Node-RED nodes tested
Thanks Martin,
how to spin Modbus TCP on Mervis?
Antonio -
Hello @arolli,
please follow this tutorial: https://kb.unipi.technology/en:sw:01-mervis:setting-modbus-server-hidden#setting_modbustcp_server_slaveMartin
-
Thanks Martin
now it's clear and working.
Antonio -
Hallo
Ich habe bei mir ein unipi 1.1 bekomme auch Information von mervis zurück ,jetzt meine Frage ,wieviel Modbus Knoten kann ich in node red einbringen.
Ich habe 3 Stück, bei den die Verbindung unterbricht
Was mache ich falschDankeschön für eure Antwort
Udo
-
This post is deleted!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login