Remote connection problem [Mervis]
-
Good morning I found the abnormalities of my PI1.
I created the program and the HMI..HO graphics downloaded all in the PLC and it seems to work properly if I connect via lan cable from my PC to the IP.
The problem is whether I connect LAN over a HUB switch or home ADSL router.
In theory and in practice being connected to wi-fi I should see it right? but it is not so ... I can not even ping it.
I tried to do a second test .. I connected the PI to a Wi-Fi Access Point I use for work..and once I connect I can not reach it..what ever need to give some particular setup to the PI..this Mervis ..
I claim that the PLC is in DHCP..
-
@TriathletC So everything solved?
-
@tomas_hora
Fixed Thomsas .. I connected UNIPi to the network and I redesign the detect .. once found through the Mervis I have downloaded the settings .. it works ..
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login