• Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Groups
    • Search
    • Register
    • Login

    Analog Output ? EMO-AO4/12

    Scheduled Pinned Locked Moved Mervis
    4 Posts 3 Posters 2.6k Views 1 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • B
      Bassam Alsibai
      last edited by Bassam Alsibai

      Hi ,

      I need help with EMO-AO4/12 Setup ,

      in Mervis what would be the device address of EMO-AO4/12 (hex or dec)

      how can i check if it's connected to the unipi or not

      how can i pass value to the EMO-AO4/12 analog channel buy using HMI

      Many thanks

      T 1 Reply Last reply
      Reply Quote 0
      • T
        todward
        last edited by

        Hi,

        the device address in Mervis is decimal (eg. "71" with all DIP switches on EMO set to "On"). The connection via I2C-Bus to UniPi is indicated by a LED below the address DIP switch. This is the hardware side. In Mervis you can check in debugging mode if your solution with EMO-AO5/12 works.
        I cannot answer your question regarding HMI, because I only use the PWM channels 4-12 with PI/PID-controller.

        Best regards

        1 Reply Last reply
        Reply Quote 1
        • B
          Bassam Alsibai
          last edited by

          @todward many thanks for your kind support

          1 Reply Last reply
          Reply Quote 0
          • T
            tomas_hora administrators @Bassam Alsibai
            last edited by

            @Bassam-Alsibai Just like any other variable. Make sure that the the output can be set while in debug mode from the variable manager and then just follow the youtube mervis hmi tutorial

            1 Reply Last reply
            Reply Quote 0

            Hello! It looks like you're interested in this conversation, but you don't have an account yet.

            Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

            With your input, this post could be even better 💗

            Register Login
            • First post
              Last post