Neuron L403 / no useable documentation
-
Wher can i find any documentation for access the components from debian (FHEM). I have a new L403, payed a lot of money and have a useless Brick...
I need e description how can acces the serial bus (there are not /dev/extcomm how can i setup this?), what i2c devices are in the hardware0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- 1c -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- 43 -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
root@neuron:/dev# i2cdetect -y 1
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- 18 -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 6f
70: -- -- -- -- -- -- -- --"As a basic p
rovided software for simple implementation of user application is OS Linux
and
communication interface Modb
us on TCP protocol. This image can be freely
downloaded
from
downloads.unipi.technology
.
Regulation
appli
cation may run either on PLC itself or on
another
device
within the network. Both options may be freely combined which brings the advantage of distributed
system
.
Further extension of application interface is web portal which serves for basic configuration
of the device
available
over HTTP protocol on port 8088"...there are no Linux-image!
-
Hello,
sorry for the lack of documentation. The image is in progress but will be available later this week.
So far there is a repository on github https://github.com/UniPiTechnology/neuron_tcp_modbus_overlay that will work fine.
Btw. the Neuron uses SPI for communication with the lower CPUs, that is handled by the neuron_tcp_server. The I2C is used only for RTC and EEPROM, all in one device MCP79410.
The neuron_tcp_server automatically creates the serial devices once running. The web interface is still not ready for most users...
Hope it helps.
-
ok, thanks. I will test it.
-
Is there an Evok version redy for Neuron (modbus), the version from git is only for unipi?
Is there any Software for neron read?
I have raspian jesse on my L403 the Modbus is ready an reachabel over network....
Have you a suggestion for the modbus-modul of fhem?
-
@burnscm see this: https://forum.unipi.technology/topic/247/evok-on-neuron-s10x/8
The same is for any other Neuron. Well you have a Mervis for free for each Neuron, so try that. The implementation there is done nicely.
Regarding the FHEM, you would have to make a definition for the Modbus device. -
@tomas_hora ..mervis for free? No i don't have. Is this new?
-
@burnscm During the checkout you had a possibility to choose software and you have chosen opensource. But if you need it, we can send it to you later...
-
yes, i will test it. Can you send it?
-
@burnscm could you send me an email with your request? [email protected]
Thanks
Adam Skorpik -
Thanks for the license!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login