• rest request result not json conform

    16
    0 Votes
    16 Posts
    7k Views
    J
    hi Tomas, sorry for my recent post! I have solved the problem! I had to delete the cache of my chrom browser and now it works! have a nice Weekend
  • di input always on and off with out connection - why?

    2
    0 Votes
    2 Posts
    2k Views
    T
    Hello, is it only issue of Di1? Do you have a debounce set in the config? If not, try to set it to some value eg 10 (10ms) and see if it helps.
  • Should I use Analog or Digital input to read Vacuum pressure?

    2
    0 Votes
    2 Posts
    2k Views
    J
    A sensor with digital output will only give you information whether the pressure is below or above given threshold. You can connect it to digital input of UniPi. You have to decide whether this is sufficient for your project or not. Jaroslav
  • evok doesn't work without a network connection

    6
    0 Votes
    6 Posts
    4k Views
    C
    To get the digital input status i use a callback function in my python script. You wrote you read the input. Which function you use to read the digital input? coopi
  • Evok 1-wire freezing

    3
    0 Votes
    3 Posts
    3k Views
    T
    Also try using shielded cable for between UniPi and hubs and connect the shielding to the buildings ground...
  • undefined

    null
    -6
    0 Votes
    -6 Posts
    0 Views
    No one has replied
  • Evok service startup problem during cold boot

    4
    0 Votes
    4 Posts
    4k Views
    T
    Hi, After adding "pigpiod" to the "Required-Start" label for evok daemon script … I am still in problem when warm/cold reboot raspberry with UnipiBoard. So, I have decided to cron an evok service restart after some seconds after a raspberry restart. Here is the steps if someone find it useful: ssh into your raspberry open session as root: sudo -s edit root´s crontab: crontab -e Add this line to the end: @reboot /bin/sleep 200 && service evok restart Save crontab file & reboot
  • Counting on digital inputs

    9
    0 Votes
    9 Posts
    6k Views
    P
    Resolved but not fully. The situation now is following. I have two devices connected to DI_2 and D_3. They show the same value as expected as they measure the same power line. Nevertheles DI_1 increasing the value as well even without connected device. Its value is aproximately a half of the DI_2 and DI_3. I made no changes on debounce time. Possibly bug in evok?
  • UniPi as MODBUS slave

    5
    0 Votes
    5 Posts
    5k Views
    ?
    Hello, we still did not have the time necessary to implement Modbus in Evok and is still on our todo list.. However the API is open to everyone and any improvement from the community is welcome!