@martin-kudláček said in Neuron L303 and M303 DI not working -- LED not showing:
mbpoll 127.0.0.1 -a 0 -0 -1 -r 1136
mhemeryck@L303-sn17:~ $ mbpoll 127.0.0.1 -a 0 -0 -1 -r 1130
mbpoll 1.4-12 - FieldTalk(tm) Modbus(R) Master Simulator
Copyright © 2015-2019 Pascal JEAN, https://github.com/epsilonrt/mbpoll
This program comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it
under certain conditions; type 'mbpoll -w' for details.
Protocol configuration: Modbus TCP
Slave configuration...: address = [0]
start reference = 1130, count = 1
Communication.........: 127.0.0.1, port 502, t/o 1.00 s, poll rate 1000 ms
Data type.............: 16-bit register, output (holding) register table
-- Polling slave 0...
[1130]: 50
mhemeryck@L303-sn17:~ $ mbpoll 127.0.0.1 -a 0 -0 -1 -r 1137
mbpoll 1.4-12 - FieldTalk(tm) Modbus(R) Master Simulator
Copyright © 2015-2019 Pascal JEAN, https://github.com/epsilonrt/mbpoll
This program comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it
under certain conditions; type 'mbpoll -w' for details.
Protocol configuration: Modbus TCP
Slave configuration...: address = [0]
start reference = 1137, count = 1
Communication.........: 127.0.0.1, port 502, t/o 1.00 s, poll rate 1000 ms
Data type.............: 16-bit register, output (holding) register table
-- Polling slave 0...
[1137]: 65535 (-1)
Right, so it indeed looks like a very high debounce time!
Strange, since I thought I had already checked that with the web view / can't recall changing it myself.
Anyways, I ran the firmware updates again, and now it's fixed! Thanks a lot!!