Topics created by SorakCz

Dear Lukas, yes, now we have new CZ tutorial for SSCP comunication. With SSCP you can full control any variables, I/Os and modules of slave UniPi. Best regards A. Vsetula 0_1576754643790_SSCP_tutorial_CZ.pdf

Thank you Tomas, it was very helpful. Now it working. I only switch off parity on external modules and communication started :-)

I assume that this problem has now been solved, based on your responses in other topics? It's hard to see the connections when they overlaid on top of each other like that.

@SorakCz In case of TCP Modbus than yes, just need to take care of the software part. Sorry for the inconveniences but a few changes in the FW can generate too much questions so I cannot give you any estimated time right now. It can be week but also four...

@SorakCz You need to add Lib.UniPi into the project - Right Click on References, Add Library. That should be it.

@SorakCz The image that was posted here was OK! You just needed to switch back to your LAN/proxy profile.

Hello, well there are many on the market (e.g. from Domat or Amit on the Czech market) and we are finalizing production of our own RS485(Modbus) for Neuron which will be available by the end of this year.

Hopefully at the beginning of Q4 2016… HW design is almost done, now tuning cases and sw.

Hi, first of all you might need to set the sleep mode to minimum because the runtime run in loops which takes some time (not event-driven system) so it is highly possible you will not be able to catch pulses that do not take much time. I recommend making your own function block in st (see the video tutorials https://www.youtube.com/playlist?list=P ... ugVSn2K1RL )