• Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Groups
    • Search
    • Register
    • Login
    • Profile
    • Following 0
    • Followers 0
    • Topics 2
    • Shares 0
    • Posts 4
    • Groups 0
    N Offline
    1. Home
    2. nerdworks.
    3. Topics

    Topics

    • N

      UniPi Neuron for CODESYS SL

      Watching Ignoring Scheduled Pinned Locked Moved CODESYS
      2
      0 Votes
      2 Posts
      2k Views
      D
      Sorry for the confusion. UniPi had removed the UniPian image and so I removed UniPi Neuron for CODESYS from the CODESYS store. I have since been working with UniPi and a new Image for UniPian was released today. The UniPian image will work with CODESYS 3.5.12.x and the release UniPi Neuron for CODESYS. 3S have also released a new Version of CODESYS which requires a rebuild and retest of UniPi Neuron for CODESYS before the product can be re-enabled in the CODESYS store. I anticipate that this will be released by 17/1/19. I will post here when the new version is available.
    • N

      SSD on Neuron

      Watching Ignoring Scheduled Pinned Locked Moved Neuron Series
      4
      0 Votes
      4 Posts
      4k Views
      N
      Here is what I did to get the UniPi Neuron running the UniPi Mervis OS image on a SSD connected to USB. Use the info below on your own risk. The Neuron should already be running on a SD card using the UniPi Mervis OS image. No additional software were added to the SD card to complete the steps below. All steps were done using ssh. Default ssh login = root:unipi 1: Enable writing to the /boot partition # mount -o remount,rw /boot 2: Enable Raspberry Pi 3 booting from USB connected mass storage. Please see here for more details. # echo 'program_usb_boot_mode=1' >> /boot/config.txt Please be aware that this command is not reversible. Reboot the Neuron, and log in again. Verify success by issuing the command: # vcgencmd otp_dump | grep 17: The output should read: 17:3020000a After reboot it is a good idea to remove the line added to /boot/config.txt above. This can be done using this command: # mount -o remount,rw /boot; sed -i '$d' /boot/config.txt 3: Prepare the USB connected disk Make sure there is only one USB connected mass storage device connected to the Neuron. Identify the disk by issuing the command: # lsblk The output should look something like this: root@unipi:~# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 111.8G 0 disk |-sda2 8:2 0 1G 0 part |-sda3 8:3 0 1G 0 part `-sda1 8:1 0 60M 0 part mmcblk0 179:0 0 7.4G 0 disk |-mmcblk0p2 179:2 0 1G 0 part / |-mmcblk0p3 179:3 0 1G 0 part /var `-mmcblk0p1 179:1 0 60M 0 part /boot root@unipi:~# sda is the USB connected disk, and in this case it has three partitions sda1-sda3 mmcblk0 is the SD card. We can also see that none of the partitions on sda is mounted. Wipe the disk by issuing the command: # wipefs -a /dev/sda The disk I used was 120 Gb. Partition sizes should be adjusted accordingly. Create the following partitions by using: fdisk -c -u /dev/sda A 150 Mb Fat32 partition set as bootable. This will become /boot A 58 Gb Linux partition. This will become / A 52 Gb Linux partition. This will become /var A 1.7 Gb swap partition (the rest of the disk). 4: Format the partitions # mkfs -t vfat -n BOOT -F 32 /dev/sda1 # mkfs -t ext4 /dev/sda2 # mkfs -t ext4 /dev/sda3 # mkswap /dev/sda4 Make sure TRIM is a default mount option # tune2fs -o discard /dev/sda1 # tune2fs -o discard /dev/sda2 # tune2fs -o discard /dev/sda3 # tune2fs -o discard /dev/sda4 5: Make directories and mount the new partitions Create a mount point for the partition that will become / # mkdir /tmp/myssd Mount the partition that will become / # mount /dev/sda2 /tmp/myssd Create mount point for the partition that will become /boot # mkdir /tmp/myssd/boot Mount the partition that will become /boot # mount /dev/sda1 /tmp/myssd/boot Create mount point for the partition that will become /var # mkdir /tmp/myssd/var Mount the partition that will become /var # mount /dev/sda3 /tmp/myssd/var 6: Copy all content on the SD card to the USB disk # rsync -ax —progress / /boot /var /tmp/myssd 7: Chroot into the new file system to do required changes Enter the new file system and mount special file systems prior to chroot # cd /tmp/myssd/ # mount --bind /dev dev # mount --bind /sys sys # mount --bind /proc proc Chroot into the new file system # chroot /tmp/myssd 8: Make new ssh keys Remove ssh keys copied from the SD card # rm /etc/ssh/ssh_host_* Generate new keys # dpkg-reconfigure openssh-server Just ignore perl warnings. 9: Edit /etc/fstab and /boot/cmdlline.txt to replace SD card with SSD # sed -i "s,/dev/mmcblk0p1,/dev/sda1,” /etc/fstab # sed -i "s,/dev/mmcblk0p2,/dev/sda2,” /etc/fstab # sed -i "s,/dev/mmcblk0p3,/dev/sda3,” /etc/fstab # echo '/dev/sda4 none swap sw 0 0' >> /etc/fstab # sed -i "s,root=/dev/mmcblk0p2,root=/dev/sda2,” /boot/cmdline.txt 10: Exit chroot, move out of the SSD filesystems and power off the Neuron # exit # cd ~ # poweroff 11: Remove power from the Neuron and remove the SD card. 12: Boot from SSD 13: Remove local ssh key Prior to logging in to the Neuron you should remove your locally stored ssh key for the Neuron from your known_hosts file. 14: Modify /etc/fstab to use UUID instead of partition names Use UUID instead of partition names in /etc/fstab. It is wise to do this modification to the fstab in case you attach another USB mass storage device to the Neuron, and what used to be /dev/sda has suddenly become /dev/sdb. Please see here for details about the use of UUID in /etc/fstab 15: Have fun! -- Joran