Hi @Martin-Kudláček , did you have a chance to look at the details?
Posts made by marioverhaeg
-
RE: Problem with running Evok on Unipi 1.1 + RPI4
-
RE: Problem with running Evok on Unipi 1.1 + RPI4
Hi @Martin-Kudláček ,
Of course, here you go:
https://www.marioverhaeg.nl/wp-content/uploads/2021/09/dkpg.txt
https://www.marioverhaeg.nl/wp-content/uploads/2021/09/evok.txt
(the text was too large to paste into the forum)Please let me know if you need more details.
Kind regards,
Mario -
RE: EVOK shows no I/O - Neuron L513
Hi Negropo,
Can you enable debug logging in the /etc/evok.conf and check the /var/log/evok.log file after restarting the service? Even though you're on a totally different platform, this looks like a similar problem as what I ran into yesterday as well: https://forum.unipi.technology/topic/1124/unipi-1-1-raspberry-pi-4-buster-evok-node-red
Kind regards,
Mario -
Problem with running Evok on Unipi 1.1 + RPI4
I have an issue with the RP4 and UniPi 1.1. The UI doesn't show the inputs and relays. The 1Wire sensors are there sometimes. When I enable debug logging I see the following errors:
2021-09-17 21:22:32,669 - evok - ERROR - Error in config section DI_12 - Invalid device circuit number 1
Traceback (most recent call last):
File "/opt/evok/config.py", line 306, in create_devices
bus = (Devices.by_int(GPIOBUS, gpiobus)).bus_driver
File "/opt/evok/devices.py", line 68, in by_int
raise Exception('Invalid device circuit number %s' % str(circuit))
Exception: Invalid device circuit number 1Any suggestions on how to fix this?