Topics created by John-paul

Hello @Martin-Kudláček ,

I have been able to solve the 1-10v dimming problem.
It was a bit of a puzzle, but in the end it went well.
I have created an extra node to a div.
I solved the EQ problem by adding a LT compare function so that when the counter reaches 0 it automatically becomes 1 again. When I now click the dimmer button on the hmi, the LED lamp gradually rises and stops when I release it. I press it back in, it goes down again, etc.
The LED lamp driver uses about 2 milliamps so i can connect enough drivers for the room lighting.
I am very happy with this solution and would like to thank you for your support.

Many regards John-paul

main.png dimmer#5.png dimmer#4.png dimmer#3.png dimmer#2.png dimmer#1.png

Hello @John-paul this seems to be related to the Merivs RunTIme Licensing mechanism which has been introduced in the Mervis IDE 2.3.0 and its runtime. Can you please licence your PLC as described on the tutorial https://kb.unipi.technology/en:sw:01-mervis:use-mervis-runtime-licence-hidden

Hello Martin,

At this moment i got everything working good with BACnet/IP. It is working very fast. All the buttons are (except the dimmer function) connected to the relay outputs,
Now i need to programm a dimmer on de M203. I want to use the AO for 1-10 volts to regulate a led dimmer module. I need to find that out, never did that before.
Thanks for your help. 0_1586428102030_20200409_112619.jpg