Thanks,
that was it.
I seen that file in old Mervis, but thought that it is older version of Lib.UniPi,
but also was blind and don't see it in on download page.
Thank you very much, now it works.
Posts made by Gif
-
RE: Missing transformation ds2408_sh_trans
-
Missing transformation ds2408_sh_trans
Hello,
I try upgrade project from Mervis 2.0.6 (48423) to latest 2.1.3 (74371),
but when using devices "1W-8R" and "1W-4R4DI",
I get error at compilation:
"can not find the transformation 'ds2408_sh_trans' in loaded projects and libraries"In Data Point Properties is now not listed such transform.
In project references I have library "Lib.UniPi", but I don't remember if there are some more steps to make it work.What I'm doing wrong?
Thanks for help. -
RE: DS2413 output
Just for info.
For me it works with DS2413 (1wire dual channel switch), at least in output mode.
I used library for DS2408 (1W-8R) and only modified family number. -
DS2413 output
Just for info.
For me it works with DS2413 (1wire dual channel switch), at least in output mode.
I used library for DS2408 (1W-8R) and only modified family number. -
RE: Factory reset delete configuration.cgi
Pokud se pripojim prez ssh a pustim rucne /var/opt/…/fastcgisvr tak web jede, tedy jen po updatu se server automaticky nespousti. Moje vzpominky na linux ale nejsou dostacujici abych hned vedel kam sahnout (nejake to init.d a tam "neco restart"?)
PS: "fastcgisvr" = nepamatuji se jak se to jmenuje (stale mam ze pocitac s internetem != pocitac kde pristupuji na unipi)
PPS: Co delam spatne? (prece nejsem jediny kdo to pouziva) -
RE: Factory reset delete configuration.cgi
Tak to vypadá že to rozbiju nahráním RT
Postup:
- Na SD kartu nahraji image jessie-2015-12-08
- Nabootoji Raspberry/UniPi a připojím se na web - je tam vzorový projekt (obrazek UniPi a ovladani relatek), web funguje
- V MervisIDE otevřu projekt a přiřadím PLC
- Nahraji můj web - ten sice nefunguje (není nahraná sestava) ale stáhne všechny soubory
- V MervisIDE dám Nahrát RT (abych mohl nahrát sestavu)
- Teď už při otevření webu nenačte soubor /configuration.cgi (vrací 404).
Mám pocit že vzorový web otevíral soubory .cgi ale můj po nahrání RT chce načítat soubory .ashx
-
RE: Audio output
Please, what is preferred way to output audio (play one of predefined sound samples) controlled by Mervis?
I expect communication by tcp socket with some existing linux player, but maybe some example exists?
Thanks for any hints. -
Audio output
Please, what is preferred way to output audio (play one of predefined sound samples) controlled by Mervis?
I expect communication by tcp socket with some existing linux player, but maybe some example exists?
Thanks for any hints. -
RE: Password for provided image
Sorry for stupid question, but what is default user/password for provided image jessie-2015-12-08 ?
Tried pi/raspberry and root/unipi but no luck. -
Password for provided image
Sorry for stupid question, but what is default user/password for provided image jessie-2015-12-08 ?
Tried pi/raspberry and root/unipi but no luck. -
RE: Factory reset delete configuration.cgi
Tak jsem se v tom ztratil, ani po znovunahrani image na kartu se mi nepodarilo HMI zprovoznit. Netusim jestli jsem prehledl nejaky krok v dokumentaci nebo delam neco spatne.
Configuration.cgi by melo byt soucasti image anebo jej tam nahrava az Mervis?
Stejne tak *.ashx soubory mam hledat v Mervisu, nebo je to uz nasledek chybejici konfigurace?Image je jessie-2015-12-08 a Mervis 44022.
Diky za nasmerovani co dal. -
RE: Factory reset delete configuration.cgi
Neco jsem provedl a uz se mi ale uz nedari zprovoznit HMI (Web), ovladaci prvky vyhazuji message box s "undefined" a napr. misto zobrazeni teploty je "???".
Dle prohlizece je chyba 404 pri pristupu na /configuration.cgi a pote taktez 404 na /web-panel-config.ashx.Je jednodusi cesta jak znovunahrani image na kartu?
PS: Nedarilo se mi zprovoznit digitalni vstupy a zkousel jsem vse mozne, update Mervis-u, zalozeni noveho projektu a pokusil jsem se i o reset do tovarniho nastaveni: PLC / Operace s PLC / Nastaveni PLC / Reset do tovarniho nastaveni … (predpokladam ze tento smazal soubory)
Cele jsem to mozna take rozvrtal tim ze jsem michal verze MevisIDE a MervisHMI (MervisHMI 44022 zacal padat pri spusteni (neosetrena vyjimka, odeslano prez bug report mervisu) a tedy jsem vracel starsi verze) -
Factory reset delete configuration.cgi
Neco jsem provedl a uz se mi ale uz nedari zprovoznit HMI (Web), ovladaci prvky vyhazuji message box s "undefined" a napr. misto zobrazeni teploty je "???".
Dle prohlizece je chyba 404 pri pristupu na /configuration.cgi a pote taktez 404 na /web-panel-config.ashx.Je jednodusi cesta jak znovunahrani image na kartu?
PS: Nedarilo se mi zprovoznit digitalni vstupy a zkousel jsem vse mozne, update Mervis-u, zalozeni noveho projektu a pokusil jsem se i o reset do tovarniho nastaveni: PLC / Operace s PLC / Nastaveni PLC / Reset do tovarniho nastaveni … (predpokladam ze tento smazal soubory)
Cele jsem to mozna take rozvrtal tim ze jsem michal verze MevisIDE a MervisHMI (MervisHMI 44022 zacal padat pri spusteni (neosetrena vyjimka, odeslano prez bug report mervisu) a tedy jsem vracel starsi verze) -
RE: Raspberry Pi Zero
Will the UniPi works with Raspberry Pi Zero?
GPIO pinout should be the same. -
Raspberry Pi Zero
Will the UniPi works with Raspberry Pi Zero?
GPIO pinout should be the same. -
RE: Switching lights and led drivers
Hello, please,
question about switching lights at home (family house).
I want use UniPi and one-wire relay/ssr modules but worry about inrush currents.Ceiling light with led bulbs, let's say 2x11W, has low current compared to 5A(10A) rated by relay, or 2A(8A) of ssr. But what about inrush at time of switch on?
The same with low voltage led lights with driver, e.g. the driver is rated at 18W, but inrush can be 60-70A for half of millisecond for good driver, for "china made" even more.Will the relay and ssr withstand this for years of using in house?
I expect be better to use the ssr because switching at zero, am I correct?
On opposite side, is there some minimal load for used ssr type?
-
Switching lights and led drivers
Hello, please,
question about switching lights at home (family house).
I want use UniPi and one-wire relay/ssr modules but worry about inrush currents.Ceiling light with led bulbs, let's say 2x11W, has low current compared to 5A(10A) rated by relay, or 2A(8A) of ssr. But what about inrush at time of switch on?
The same with low voltage led lights with driver, e.g. the driver is rated at 18W, but inrush can be 60-70A for half of millisecond for good driver, for "china made" even more.Will the relay and ssr withstand this for years of using in house?
I expect be better to use the ssr because switching at zero, am I correct?
On opposite side, is there some minimal load for used ssr type?