wich pakage of unipian is for unipi 1.1?

hi,
it looks as you have change your unipian now to the Debian repository. Thats great, cause now we can realy use unipian with the newest kernel for raspberry pi 4 an next generations.

thank u 4 that

will an apt-get dist-upgrade get problems ?

realy? the RPi3 came out 2 years ago, the last image of your unipian is mor than 2 years old.
Anyone who buys any unipi module whant to have a upgradeable, stable and reliable system.
you say you cants see anyone having time, since 2 years and in the near future?
You only sell a RPi3 at your shop, so your hardware is no more compatible with Fhem without search an buy hardware anywhere else.

i'm shocked

well, sorry, could we find a way to fix this 4 us all.

on an previos Posting you said for upgrading the unipian: "But you should be safe to do apt-get update & upgrade after mounting the FS as read-write (mount -o remount, rw /)"
i think you mean the complete flash card?

I think whith an complete upgradet OS the new RPi3 could run. so i like to test this and make an upgradet image wich u can put on your downloadsection for other users.

is there a timeframe to see when a new image for the RPi3 suport is available?

sure, i have an UniPi 1.1 and try to use unipian_fhem-v0.3-rpi. this is correct

hi,
have bought new raspberry Pi3 and try to get running, but it stops loading if screen shows the 4 coulor spectrum. There is no act LED lighting, no change in any time.
Have testet the hardware with raspian and everything is ok.
So not the card or the Raspberry are the problem, it doesnt load unipian.

Have you an Update to fix that?

never have seen, but maybe i think it could be when nothing is connected on D i

hello,
are there unused pins on the connection to the RaspberryPi when unipi is complete in use?

hi,
im not sure how to do in Marvis, but at FHEM you can use Email, telegram or with an sms - gateway online.And with an gsm modul and an sim-card.
i think Mervis has a possible way, but i dont know mervis ;)

hi M4kr
i think you mean

elif (typ == 'DS2438'):

return DS2438(address, typ, bus, interval=interval, circuit=circuit)

as codeblock, i think it can help to uncomment this part. that show to be the part in evok owclient to give knowing of your batterymonitor-part of the unica device.

maby you have to reload (better restart the system) to load the changed module.

after this check if the DS2438 now be loadet

well i'm not sure, but if this doesnt help you can roll back ;)

one wire are most easy, there was o lot to read online, beginning at wikipedia ;)

good luck

PS: feedback after would be nice

Hello M4kr,

i've take same Sensors 1 y ago ant try'd to get running under fhem.
maybe i can take temperature and 2two other values, but nobody here can tell how to convert correctly.
so i can tell u one thing, the message "Unsupported 1wire device DS2438 (2675FA0C02000054) detected" tell you that your software dont know how to handle the device.
Maybe i dont know evok, two things could be i think
-first you need a definition of the DS2438 in evok to load (if it has one)
-second you have to implement the definition yourself

an DS2438 is wide known device, i think there would be anywhere a possible modul to load ;)
my fhem know the DS2438, only the converting of the 2 values are tricky, anywhere u can change to fhem :)

good luck

last time i ve tested apt-get update & upgrade the unipian doesnt startet, only a new setup with old unipian bring the system back up and running.

hello,
your unipian version is now 1 y old, raspbian are some times upgradet and bugfixed. are there an Update for unipian possible next weeks?
it was time 4 an update

hey,
the standart measurement of Voltage on arduino are at max 5V measurement range, between 0 - 1024.
That's like the Values u can see, but only higher..
i dont know the max Value of measurement from unipi, but if you put 10V at input u can see (maybe anywhere over 408421.875 i think, i name 5000000 as max at 10V here).
Set this in relation 0v-10V to Value 0 - 5000000 so you can count your Voltage.

Hallo,
ist es möglich eine USV für
Raspberrypi störungsfrei an dem auf einem Unipi gedockten Raspberry Pi2 zu betreiben?
Beispiel:
S-USV-pi-basic
Raspberry Pi USV PiUSV+ 702601
Pi USV +

i ve measured the Input voltage, 3,7V is correct. why are the 1-wire bus dont provide 5V?

thx thomas,

i think the Value wich FHEM give as VDD in the Reading (see picture on further post) ma be the Vsense from the lighting sensor. Could it be?
i require that the real VDD on the 1-wire out on the unipi was +5V (i didnt measure this)

Now, so u translate I1 , I2 , I3 into Vad , VDD and Temp, i can see the calculating, thanks 4 that.

and another question:

• i ve feed the unipiv1.1 with an industrial power supply 5v
• the unica is direktly conected with only 5 cm wire between

why did the VDD measure only 3,7 Volt?

@tomas, thx 4 first reply.
the documentation doesnt helps, because there are only one formula to insert in a loxone SW, without any informational depend on VAD/VDD
in another post here stay the unica sensor works with fhem, please help us to get it in possible values.
Regards