• Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Groups
    • Search
    • Register
    • Login

    1-wire sensors lost after some time

    Scheduled Pinned Locked Moved Official API - Evok
    3 Posts 2 Posters 1.7k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • C
      Christian
      last edited by Christian

      1-wire sensors are lost after some time of usage.
      for example the recorded data (via node-red to influxdb):
      0_1552202295347_f1345be6-08b3-4641-90a1-aa9c6731b839-grafik.png

      i tried to reboot via ssh (M203 Module), this doesn't help (after the last points near 07:45).
      There is no issue in the file systems with the used MicroSD card (SanDisk Extreme Pro)
      the evok webinterface shows N/A for the defined sensors in the evok.cfg
      0_1552202563107_19807eeb-8f46-44b7-932a-00410ef853b1-grafik.png

      For cabling i use a 2x2x0,8 EIB cable. Cable length are different to the sensors (in a range of 5-15 meters)

      later i'll take pictures of the wiring points to ensure all things are ok.
      ( I think there is some issue in the 1-wire port or evok )

      1 Reply Last reply
      Reply Quote 0
      • C
        Christian
        last edited by

        One DS18B20 is faulty. To discover this one sensor was not easy.
        Therefore, I have each data line of the sensors (heating) individually connected to the bus and then tested the 1-wire bus. (if the heating sensor data wires are disconnected, the other 2 sensors are transmitting values)
        At no time did I disconnect GND and + 5V to a sensor.
        Unfortunately the simple connection of the sensor data ware was not sufficient, because EVOK did not deliver any new values.
        Only a restart of the module could detect a functioning sensor / 1-wire bus within one minute.
        Without restart, the value comes in felt 5-10 minutes, if the bus works well ...

        6 sensor wires in one clamp, the faulty was there.
        The sensor wires are drilled together and then put in the WAGO clamp.
        0_1552235062206_IMG_20190310_124528.jpg

        Martin KudláčekM 1 Reply Last reply
        Reply Quote 0
        • Martin KudláčekM
          Martin Kudláček @Christian
          last edited by

          Hello @christian,
          it is hard to see from the picture, but it looks like your sensors are connected in star topology. This is highly unrecommended and you can read more about it here: https://www.maximintegrated.com/en/app-notes/index.mvp/id/148

          Best regards,
          Martin

          1 Reply Last reply
          Reply Quote 0

          Hello! It looks like you're interested in this conversation, but you don't have an account yet.

          Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

          With your input, this post could be even better 💗

          Register Login
          • First post
            Last post