Serial port selection with io.openport
-
Hi all,
I've got a USB-to-serial device as that's currently identified as /dev/ttyUSB0. How do I open a connection to this device with io.openport? The file at https://files.unipi.technology/s/public?path=%2FSoftware%2FMervis%2FExample projects%2FCustom serial protocol shows that I need a definition in the format 'serial:6:9600,8,N,1'. I'm guessing the '6' is identifying which serial port to open, but where is that number mapped to a device?
Thanks,
Matt -
Hello @mdturnerphys,
sorry!! This is not mentioned anywhere (will write it in the step by step) this is Mervis internal mapping.... The numbering is following:
- USB1-USB4 - 10-13
So USB1(as labeled on the case) has ID 10.
-
It works!! Thanks!!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login