Digital input

[juntiedt]

When a was testing my digital inputs on my unipi 1.1, all digital inputs are working except 7,8 and 9.
When I am using the standard unipi web interface or my own websocket based Python programm it's the same problem.
Is this a hardware or a software problem?

Any idea how to fix it?

regards Hannes

[tomas_hora]

@juntiedt Please check that the jumpers J2-J5 are all switched to the side of the labels and also that there is no other software using those GPIOs (eg. for SPI,...)

[juntiedt]

thanks for the quick response!

I had SPI on in the raspi configuration. I switched it off, rebooted and all is ok. :-)