Modbus pause between telegrams
-
Hi !
Please, do you know why when I put 30s to pause between telegrams in modbus chanel, I always have a short delay:21:59:55.6940 => Sending: 00 A1 00 00 00 06 00 03 00 00 00 08 21:59:55.7040 <= Receiving: 00 A1 00 00 00 13 00 03 10 03 F2 00 E5 01 FE 00 E4 02 8A 00 00 00 00 03 84 21:59:56.2240 => Sending: 00 A2 00 00 00 06 00 03 00 00 00 08 21:59:56.2340 <= Receiving: 00 A2 00 00 00 13 00 03 10 03 F2 00 E5 01 FE 00 E4 02 8A 00 00 00 00 03 84 21:59:56.7540 => Sending: 00 A3 00 00 00 06 00 03 00 00 00 08 21:59:56.7640 <= Receiving: 00 A3 00 00 00 13 00 03 10 03 F2 00 E5 01 FE 00 E4 02 8A 00 00 00 00 03 84 21:59:57.2840 => Sending: 00 A4 00 00 00 06 00 03 00 00 00 08 21:59:57.2940 <= Receiving: 00 A4 00 00 00 13 00 03 10 03 F2 00 E5 01 FE 00 E4 02 8A 00 00 00 00 03 84 -
@Giamba It's not 30s but 0.5s. Check the read/write interval in the definition of the device...
-
Ok, thanks, I find it!
But, so, what's de "pause between telegrams" parameter ?
-
@Giamba The pause between telegrams can be used when communicating with devices that you send a command to make some measurement and the measurement takes some time and only after that time you can read the measured value. Then you use the pause between telegrams property.
-
Ok thanks for your remply!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login