HMI Problem
-
@tomas_hora Unfortunately that did not work for me because I do not use TIME variables, but TIME_OF_DAY. When I try to connect these two types, the compiler throws an error. I found a workaround to convert to TIME_OF_DAY with add_tod_time. This method means a lot of work to program the Function and HMI and it becomes slightly confusing...
-
@robert_n Well for that purpose, you could use one of the provided schedulers or no?
-
I have tried to do the function block
But i just get "build fail."
Do I have to write any more parameter in the block or matter it works directlyFUNCTION_BLOCK IntlToSec VAR_INPUT seconds_int: int; END_VAR VAR_OUTPUT out_time : TIME; END_VAR out_time := mul_time(time#1s, seconds_int); END_FUNCTION_BLOCK
-
@zorro_66 is there any more info for the message Build fail?
-
Indicates that it is wrong in any column
But the error changes depending on where I have the cursor standing
-
@zorro_66 Could you share the project? That might be easier to debug...
-
How can I send the project to you i tried to mail but it did not work.
I can not upload this one has no privileges so it's enough -
@zorro_66 Zip the archive and send me a link to google drive/dropbox or any other file sharing service...
-
Hello
Tomas, you've probably got a link to Dropbox and my project
Sorry it took some time to fix but i have been on vacation -
@zorro_66 All input variables of a function block has to be connected or checked as not visible and set a default value. That is missing in your BD13_SwitchOffDelay of Interlocks program.
The second issue is, that in the PLC program mapping, you have mapped two programs that do not exist...
-
Thanks for the quick reply Tomas
Well, I know I had nothing connected to that block but did not think it was the fault.
Because it's on the position my time_Converter was supposed to enter.
Which two programs have I mapped that are not available -
@zorro_66 if you double click on the error in the result table, it will usually show you where the issue is... Or just read what it says.