• Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Groups
    • Search
    • Register
    • Login

    Codesys emo R8 device

    Scheduled Pinned Locked Moved CODESYS
    9 Posts 5 Posters 5.7k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • AlvermanA
      Alverman
      last edited by

      But there is no CoDeSys device for emo r8?

      T 1 Reply Last reply
      Reply Quote 0
      • T
        tomas_hora administrators @Alverman
        last edited by

        @Alverman The Emo-R8 is basically the same as UniPi Relays module, you just need to set the address that you configured using the onboard

        1 Reply Last reply
        Reply Quote 0
        • AlvermanA
          Alverman
          last edited by

          ok,
          but in CoDeSys which imposed the address?
          The address should be set to the page I / O mapping?
          I have tried to set under address% QB1 but when the active output of the relay unipi 1.1 vibrates.
          How should I set the address if the emo r8 is set to address Hex 21 or 33 Dec?

          Thank you, Alberto

          1 Reply Last reply
          Reply Quote 0
          • T
            tomas_hora administrators
            last edited by

            Ok, sorry. I thought that the address can changed but it is not. Since we are not the developers of the package for Codesys, you would have to ask the developer. http://store.codesys.com/codesys-for-unipi.html#Support

            1 Reply Last reply
            Reply Quote 0
            • AlvermanA
              Alverman
              last edited by

              Excuse me but you, why should I ask CoDeSys?
              you have not developed UNIPI for CoDeSys?
              Then you should have to implement your cards or not?
              Why CoDeSys?

              Alberto

              T 1 Reply Last reply
              Reply Quote 0
              • T
                tomas_hora administrators @Alverman
                last edited by tomas_hora

                @Alverman You should not contact Codesys, but the author of the package - [email protected]

                We did not develop the package.

                1 Reply Last reply
                Reply Quote 0
                • D
                  DavidCozens
                  last edited by

                  A driver for the EMO-R8 is under development and will be released later this year

                  1 Reply Last reply
                  Reply Quote 0
                  • F
                    FabioIT
                    last edited by

                    Any news about the driver?I know codesys is not supported but is still working ? I bought a Codesys license and with unipi 1.1 and EMO.R8 ? I need try the driver!

                    Martin KudláčekM 1 Reply Last reply
                    Reply Quote 0
                    • Martin KudláčekM
                      Martin Kudláček @FabioIT
                      last edited by

                      Hello @FabioIT,
                      the development of Codesys support has been dropped altogether. The Codesys can be still used on Neuron via ModbusTCP. The Unipi 1.1 doesn't have IOs accessible via ModbusTCP, only scattered over I2C, GPIO and so on - nothing easily configurable.

                      Best regards,
                      Martin

                      1 Reply Last reply
                      Reply Quote 0

                      Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                      Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                      With your input, this post could be even better 💗

                      Register Login
                      • First post
                        Last post