• Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Groups
    • Search
    • Register
    • Login

    1 wire net dies "Problem solved"

    Scheduled Pinned Locked Moved Mervis
    23 Posts 4 Posters 16.5k Views 1 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • W
      wizro_pl @zorro_66
      last edited by

      @zorro_66 did you connect shield to the ground ? it is necessary.

      1 Reply Last reply
      Reply Quote 0
      • zorro_66Z
        zorro_66
        last edited by

        Yes as in the picture
        alt text

        1 Reply Last reply
        Reply Quote 0
        • zorro_66Z
          zorro_66
          last edited by

          Now it has worked in two days
          My second Unipi do not have these problems
          where I have 20 pieces of sensors connected in a star network with no shielded cable.
          Does it help to update the software in Rpi.
          There seems to be some software errors.
          Just got home 2 1-Wire hub from Unipi.
          Can i connect with a standard RJ45 patch cable

          1 Reply Last reply
          Reply Quote 0
          • zorro_66Z
            zorro_66
            last edited by

            Now, I have rebuilt my entire 1-wire network and used Unipi hub instead
            so now we will see if the network stops die
            alt text
            alt text

            1 Reply Last reply
            Reply Quote 0
            • zorro_66Z
              zorro_66
              last edited by

              My 1-wire is incredibly unstable
              network dies at irregular intervals, showing unreasonable temperatures.
              I have rebuilt my net for spec from Unipi wiki shielded cat5 cable and hubs.
              But no difference 1-wire network die anyways.
              So it can not be anything wrong with the network itself, but the fault must be in Unipi alt. software.
              Grateful for help .

              alt text

              T 1 Reply Last reply
              Reply Quote 0
              • T
                tomas_hora administrators @zorro_66
                last edited by

                @zorro_66 Can you try enabling the CRC check at the sensors? Just check the box in the sesors in the Scratchpad group. You might need to make the sensor as a custom and backup your project before playing with it

                1 Reply Last reply
                Reply Quote 0
                • zorro_66Z
                  zorro_66
                  last edited by

                  I do not understand what you mean now

                  T 1 Reply Last reply
                  Reply Quote 0
                  • T
                    tomas_hora administrators @zorro_66
                    last edited by

                    @zorro_66 1_1488349676124_cusom_1w.png 0_1488349676123_1wcrc.png

                    1 Reply Last reply
                    Reply Quote 0
                    • zorro_66Z
                      zorro_66
                      last edited by

                      aha tanks:thumbsup_tone3:

                      1 Reply Last reply
                      Reply Quote 0
                      • zorro_66Z
                        zorro_66
                        last edited by

                        Problem solved, I finally found a bad solder
                        at the VCC pin caused power loss in my 1-wire network
                        alt text

                        T 1 Reply Last reply
                        Reply Quote 1
                        • T
                          tomas_hora administrators @zorro_66
                          last edited by

                          We are sorry for that @zorro_66!

                          But it is really hard to find out this kind of issue during our test but we will update our testing procedures... Thanks for the info.

                          1 Reply Last reply
                          Reply Quote 0

                          Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                          Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                          With your input, this post could be even better 💗

                          Register Login
                          • First post
                            Last post