Inputs 13&14
-
How do I connect Inputs 13 & 14 to my RPi2 and mervis
-
How do I connect Inputs 13 & 14 to my RPi2 and mervis
-
It is a little bit complicated…
Mechanically the same way as here: http://unipi.technology/wiki/Inputs_13,14 Choose the GPIOs of RPi, mount the FS as readwrite (mount -o remount,rw) configure evok as discussed here: viewtopic.php?f=7&t=94 and than you need to customize the device on the TCP modbus channel in Mervis to add the rest two DIs and its counters...
-
But I do not use Evok
